Combining planar and central chirality in ferrocene thiophosphine-sulfoxides

Novel chiral ferrocenylthiophosphine–sulfoxide and phosphine–sulfoxide derivatives possessing planar chirality for the ferrocene moiety and central chirality at the sulfur atom have been synthesized. These ligands can be obtained as pure diastereoisomers in both racemic and enantiomerically pure forms. Complete characterization by XRD analysis has allowed the assignment of the absolute configuration in each case. Preliminary coordination studies of the phosphine–sulfoxide ligands on platinum are also reported. These show chelating complexation by the phosphorous and sulfur atoms.     

Acidity of Alginate Aerogels Studied by FTIR Spectroscopy of Probe Molecules

Supercritical drying of alginate gels is an efficient way to prepare aerogels with high surface area (>300 m² · g⁻¹). FTIR spectroscopy allows to monitor the adsorption of NH₃ from the gas phase onto the acid sites of the alginate. Free carboxylic groups are effective Brønsted sites, whereas the divalent cations used in the ionotropic gelation present the properties of Lewis sites. The ratio between Brønsted and Lewis sites provides infomation on the role of pH in alginate gelation and suggests that non-buffered gelation by transition-metal cations is a mixed ionotropic-acid process.     

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid is proposed. A solution of 0.1 mol L(-1) sodium chloride is used as carrier. Titration is achieved by aspirating acetic acid samples between two strong base-zone volumes into a holding coil and by channelling the stack of well-defined zones with flow reversal through a reaction coil to a potentiometric sensor where the peak widths were measured. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 1-9 g/100 mL. Vinegar samples were analysed without any sample pre-treatment. The method has a relative standard deviation of 0.4% with a sample frequency of 28 samples per hour. The results revealed good agreement between the proposed sequential injection and an automated batch titration method.     

Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Noniterative biexponential fluorescence lifetime imaging in the investigation of cellular metabolism by means of NAD(P)H autofluorescence.

The cofactors NADH and NADPH, hereafter NAD(P)H [NAD(P)= nicotinamide adenine dinucleotide (phosphate)], belong to the principal endogenous indicators of energetic cellular metabolism. Since the metabolic activity of cells is given by the ratio between the concentrations of free and protein-bound NAD(P)H, the development of autofluorescence techniques which accurately measure the modifications to this ratio is particularly significant. Hitherto the methods applied in the monitoring of cellular metabolism have provided either imprecise results, due to interference of the NAD(P)H signal by perturbing factors, or they have required a complicated internal calibration. We employ biexponential fluorescence lifetime imaging (FLIM) in order to discriminate between the free and protein-bound NAD(P)H without any previous calibration. Thus, we have obtained directly, and for the first time, a high-resolution map of cellular metabolism, that is, an image of the contribution of the protein-bound NAD(P)H to the cumulative NAD(P)H fluorescence signal. Moreover, we demonstrate that protein-NAD(P)H complexes characterised by different fluorescence lifetimes are not uniformly distributed all over the cell, as assumed until now, but are concentrated in certain cellular regions. The different fluorescence lifetimes indicate either different protein-NAD(P)H complexes or different bond strengths between NAD(P)H and the protein in these complexes. Since an important aspect in biological applications is to monitor the dynamics of the relevant processes (such as cellular metabolism), rapid dynamical techniques, for example, rapid biexponential fluorescence lifetime imaging, are needed. Furthermore, it is necessary to reduce the evaluation effort as much as possible. Most of the evaluation techniques in multiexponential FLIM are time-expensive iterative methods. The few exceptions are connected with a loss of information, for example, global analysis; or a loss in accuracy, for example, the rapid evaluation technique (RLD). We implement for the first time in FLIM a noniterative, nonrestrictive method originally developed by Prony for approximations of multiexponential decays. The accuracy of this method is verified in biexponential FLIM experiments in time-domain on mixtures of two chromophores both in homogenous and in heterogeneous media. The resulting fluorescence lifetimes agree (within error margins) with the lifetimes of the pure substances determined in monoexponential FLIM experiments. The rapidity of our evaluation method as compared to iterative pixel-by-pixel methods is evidenced by a reduction of the evaluation time by more than one order of magnitude. Furthermore, the applicability of this method for the biosciences is demonstrated in the investigation of cellular metabolism by means of NAD(P)H endogenous fluorescence.     

Mass spectrometric approaches for elucidation of antigenantibody recognition structures in molecular immunology

Mass spectrometric approaches have recently gained increasing access to molecular immunology and several methods have been developed that enable detailed chemical structure identification of antigen-antibody interactions. Selective proteolytic digestion and MS-peptide mapping (epitope excision) has been successfully employed for epitope identification of protein antigens. In addition, "affinity proteomics" using partial epitope excision has been developed as an approach with unprecedented selectivity for direct protein identification from biological material. The potential of these methods is illustrated by the elucidation of a beta-amyloid plaque-specific epitope recognized by therapeutic antibodies from transgenic mouse models of Alzheimer's disease. Using an immobilized antigen and antibody-proteolytic digestion and analysis by high resolution Fourier transform ion cyclotron resonance mass spectrometry has lead to a new approach for the identification of antibody paratope structures (paratope-excision; "parex-prot"). In this method, high resolution MS-peptide data at the low ppm level are required for direct identification of paratopes using protein databases. Mass spectrometric epitope mapping and determination of "molecular antibody-recognition signatures" offer high potential, especially for the development of new molecular diagnostics and the evaluation of new vaccine lead structures.     

Synthesis,characterization of nanosized CoAl<Subscript>2</Subscript>O<Subscript>4</Subscript> and its electrocatalytic activity for enhanced sensing application

Nanosized cobalt aluminate (CoAl₂O₄) was prepared by thermolysis of heteronuclear coordination compound, namely [Al₂Co(C₂O₄)₄(OH₂)₆]. The synthesized precursor was characterized by chemical analysis, vibrational spectra and thermal analysis. The cobalt aluminate obtained after a heating treatment of the precursor at 700 °C was characterized by IR, XRD, TEM coupled with SAED measurements. Two types of carbon-based electrodes, glassy carbon and boron-doped diamond electrodes were decorated with the obtained cobalt aluminate in order to enhance the electroanalytical performance for the tetracycline (TC) detection in the aqueous solutions. Cyclic voltammetry technique was used to determine the effect of the nanosized CoAl₂O₄ on the electrochemical oxidation of TC and as consequence, for TC detection at both carbon-based electrodes. The obtained cobalt aluminate exhibited the electrocatalytic activity toward TC detection in direct relation with the type of the carbon substrate, which allowed enhancing the electroanalytical parameters of TC detection in the aqueous solution.     

Fluorescent Phthalocyanine-Encapsulated Bovine Serum Albumin Nanoparticles: Their Deployment as Therapeutic Agents in the NIR Region

In recent times, researchers have aimed for new strategies to combat cancer by the implementation of nanotechnologies in biomedical applications. This work focuses on developing protein-based nanoparticles loaded with a newly synthesized NIR emitting and absorbing phthalocyanine dye, with photodynamic and photothermal properties. More precisely, we synthesized highly reproducible bovine serum albumin-based nanoparticles (75% particle yield) through a two-step protocol and successfully encapsulated the NIR active photosensitizer agent, achieving a good loading efficiency of 91%. Making use of molecular docking simulations, we confirm that the NIR photosensitizer is well protected within the nanoparticles, docked in site I of the albumin molecule. Encouraging results were obtained for our nanoparticles towards biomedical use, thanks to their negatively charged surface (−13.6 ± 0.5 mV) and hydrodynamic diameter (25.06 ± 0.62 nm), favorable for benefitting from the enhanced permeability and retention effect; moreover, the MTT viability assay upholds the good biocompatibility of our NIR active nanoparticles. Finally, upon irradiation with an NIR 785 nm laser, the dual phototherapeutic effect of our NIR fluorescent nanoparticles was highlighted by their excellent light-to-heat conversion performance (photothermal conversion efficiency 20%) and good photothermal and size stability, supporting their further implementation as fluorescent therapeutic agents in biomedical applications.     

Developments and applications of separation and microfluidics methods coupled to electrospray mass spectrometry in glycomics of nervous system gangliosides

Gangliosides are particularly abundant in the nervous system (NS) where their pattern and structure in a certain milieu or a defined region exhibit a pronounced specificity. Since gangliosides are useful biomarkers for diagnosis of NS ailments, a clear-cut mapping of individual components represents a prerequisite for designing ganglioside-based diagnostic procedures, treatments, or vaccines. These bioclinical aspects and the high diversity of ganglioside species claim for development of specific analytical strategies. This review summarizes the state-of-the-art in the implementation of separation techniques and microfluidics coupled to MS, which have contributed significantly to the advancement of the field. In the first part, the review discusses relevant approaches based on HPLC MS and CE coupled to ESI MS and their applications in the characterization of gangliosides expressed in healthy and diseased NS. A considerable section is dedicated to microfluidics MS and ion mobility separation MS, developed for the study of brain gangliosidome and its changes triggered by various factors, as well as for ganglioside biomarker discovery in neurodegenerative diseases and brain cancer. In the last part of the review, the benefits and perspectives in ganglioside research of these high-performance techniques are presented.     

On the compatibility of the IPP/PA6/EPDM blends with and without functionalized IPP I. Thermo-oxidative behaviour

Binary isotactic polypropylene (IPP)/polyamide 6 (PA6) and ternary IPP/PA6/ethylene–propylene diene terpolymer (EPDM) blends in various ratios were obtained in a Haake Rheocord mixer. Processing behaviour was changed in the presence of IPP functionalized with bismaleimide (BMI), maleic anhydride (MA) and acrylic acid (AA) as reactive compatibilizing agents. The thermal and thermo-oxidative behaviour of blends was studied by differential scanning calorimetry and thermogravimetry. The functionalized IPPs modify the crystallinity degree and the decomposition behaviour of both IPP and PA6 as a result of chemical reactions of functional groups with those of the PA6. The changes depend on the IPP/PA6 or IPP/PA6/EPDM ratio, the chemical nature and amount of the functionalized IPP. On the basis of the processing and thermal data one can conclude that the compatibilizing agent effect increases in the following order: IPP-AA 相似文献