Designing micro-patterned Ti films that survive up to 10% applied tensile strain

Reducing the strain in brittle device layers is critical in the fabrication of robust flexible electronic devices. In this study, the cracking behavior of micro-patterned 500-nm-thick Ti films was investigated via uniaxial tensile testing by in situ SEM and 4-point probe measurements. Both visual observations by SEM and 4-pt resistance measurements showed that strategically patterned oval holes, off-set and rotated by 45°, had a significant effect on limiting the extent of cracking, specifically, in preventing cracks from converging. Failure with regard to electrical conduction was delayed from less than 2% to more than 10% strain.     

Activity of AC electrokinetically immobilized horseradish peroxidase

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H₂O₂ to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.     

Preparation of polycrystalline Ti-Al-O films by magnetron sputtering ion plating: constitution, structure and morphology

Ti-Al-O layers were deposited on Si-<100> wafers at 500 °C by means of reactive magnetron sputtering ion plating (R-MSIP). An Al-target was sputtered in rf-mode and a Ti-target in dc-mode simultaneously by an oxygen/argon plasma. The influence of the Al- and Ti-sputter powers on composition, structure, and morphology of the Ti-Al-O layers and the binding states of the components were investigated. The analysis with EPMA, XPS, AES and TEM yielded the following results: Ti-Al-O coatings with different Ti, Al, and O contents in the range of TiO₂ to Al₂O₃ were grown. TEM structure analysis revealed: the pure TiO₂ film consisted of the tetragonal phases rutile and anatase; the two structures were found in the titanium-rich Ti-Al-O film, too, but with significant smaller lattice constants. The aluminium-rich Ti-Al-O film displayed the same cubic structure of γ-Al₂O₃ as determined for the pure Al₂O₃ film, but the lattice constant is significant lower. Evaluation of the TEM pattern of the film with a Ti/Al ratio of 0.8 indicates a hexagonal structure with lattice constants similar to those of κ′-Al₂O₃. All films are nanocrystalline and not textured. Received: 24 June 1996 / Revised: 27 December 1996 / Accepted: 4 January 1997     

Protein dielectrophoresis: Key dielectric parameters and evolving theory

Globular proteins exhibit dielectrophoresis (DEP) responses in experiments where the applied field gradient factor ∇E² appears far too small, according to standard DEP theory, to overcome dispersive forces associated with the thermal energy kT of disorder. To address this a DEP force equation is proposed that replaces a previous empirical relationship between the macroscopic and microscopic forms of the Clausius–Mossotti factor. This equation relates the DEP response of a protein directly to the dielectric increment δε⁺ and decrement δε⁻ that characterize its β-dispersion at radio frequencies, and also indirectly to its intrinsic dipole moment by way of providing a measure of the protein's effective volume. A parameter Γ_pw, taken as a measure of cross-correlated dipole interactions between the protein and its water molecules of hydration, is included in this equation. For 9 of the 12 proteins, for which an evaluation can presently be made, Γ_pw has a value of ≈4600 ± 120. These conclusions follow an analysis of the failure of macroscopic dielectric mixture (effective medium) theories to predict the dielectric properties of solvated proteins. The implication of a polarizability greatly exceeding the intrinsic value for a protein might reflect the formation of relaxor ferroelectric nanodomains in its hydration shell.     

Improved Dermal and Transdermal Delivery of Curcumin with SmartFilms and Nanocrystals

Poor aqueous solubility of active compounds is a major issue in today’s drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compared to the dermal penetration efficacy of curcumin from curcumin bulk suspensions and nanocrystals, respectively. The smartFilms enabled an effective dermal and transdermal penetration of curcumin, whereas curcumin bulk- and nanosuspensions were less efficient when the curcumin content was similar to the curcumin content in the smartFilms. Interestingly, it was found that increasing numbers of curcumin particles within the suspensions increased the passive dermal penetration of curcumin. The effect is caused by an aqueous meniscus that is created between particle and skin if the dispersion medium evaporates. The connecting liquid meniscus causes a local swelling of the stratum corneum and maintains a high local concentration gradient between drug particles and skin. Thus, leading to a high local passive dermal penetration of curcumin. The findings suggest a new dermal penetration mechanism for active compounds from nano-particulate drug delivery systems, which can be the base for the development of topical drug products with improved penetration efficacy in the future.     

Quinol-containing ligands enable high superoxide dismutase activity by modulating coordination number,charge, oxidation states and stability of manganese complexes throughout redox cycling

Reactivity assays previously suggested that two quinol-containing MRI contrast agent sensors for H₂O₂, [Mn(H2qp1)(MeCN)]²⁺ and [Mn(H4qp2)Br₂], could also catalytically degrade superoxide. Subsequently, [Zn(H2qp1)(OTf)]⁺ was found to use the redox activity of the H2qp1 ligand to catalyze the conversion of O₂˙⁻ to O₂ and H₂O₂, raising the possibility that the organic ligand, rather than the metal, could serve as the redox partner for O₂˙⁻ in the manganese chemistry. Here, we use stopped-flow kinetics and cryospray-ionization mass spectrometry (CSI-MS) analysis of the direct reactions between the manganese-containing contrast agents and O₂˙⁻ to confirm the activity and elucidate the catalytic mechanism. The obtained data are consistent with the operation of multiple parallel catalytic cycles, with both the quinol groups and manganese cycling through different oxidation states during the reactions with superoxide. The choice of ligand impacts the overall charges of the intermediates and allows us to visualize complementary sets of intermediates within the catalytic cycles using CSI-MS. With the diquinolic H4qp2, we detect Mn(iii)-superoxo intermediates with both reduced and oxidized forms of the ligand, a Mn(iii)-hydroperoxo compound, and what is formally a Mn(iv)-oxo species with the monoquinolate/mono-para-quinone form of H4qp2. With the monoquinolic H2qp1, we observe a Mn(ii)-superoxo ↔ Mn(iii)-peroxo intermediate with the oxidized para-quinone form of the ligand. The observation of these species suggests inner-sphere mechanisms for O₂˙⁻ oxidation and reduction that include both the ligand and manganese as redox partners. The higher positive charges of the complexes with the reduced and oxidized forms of H2qp1 compared to those with related forms of H4qp2 result in higher catalytic activity (k_cat ∼ 10⁸ M⁻¹ s⁻¹ at pH 7.4) that rivals those of the most active superoxide dismutase (SOD) mimics. The manganese complex with H2qp1 is markedly more stable in water than other highly active non-porphyrin-based and even some Mn(ii) porphyrin-based SOD mimics.

Manganese complexes with polydentate quinol-containing ligands are found to catalyze the degradation of superoxide through inner-sphere mechanisms. The redox activity of the ligand stabilizes higher-valent manganese species.     

Reactions of N-silylphosphoranimines with alcohols: synthesis and structure of cyclotriphosphazenes with nongeminal methyl and phenyl substituents

The reactions of Me(3)SiN=P(OR")RR'(R" = Ph, CH(2)CF(3); R, R' = Me, Ph) with alcohols were investigated. With nonequivalent amounts of CF(3)CH(2)OH, the reactions produced high yields of the cyclic phosphazene (Me(2)PN)(3) and both the cis and trans isomers of nongeminally substituted [(Ph)(Me)PN](3). The isomers of this new cyclic phosphazene were separated by column chromatography and characterized by NMR and IR spectroscopy, elemental analysis, and X-ray crystallography. Crystals of the cis isomer 6a have a monoclinic crystal system, while the trans isomer 6b has a triclinic crystal system with two different molecules in an asymmetric unit. The bond lengths and bond angles are very similar to those of the simpler cyclic trimers (Me(2)PN)(3) and (Ph(2)PN)(3.) A likely pathway for the formation of these compounds is discussed.     

A Singular System with Precise Dosing and Spatiotemporal Control of CRISPR‐Cas9

Several genome engineering applications of CRISPR‐Cas9, an RNA‐guided DNA endonuclease, require precision control of Cas9 activity over dosage, timing, and targeted site in an organism. While some control of Cas9 activity over dose and time have been achieved using small molecules, and spatial control using light, no singular system with control over all the three attributes exists. Furthermore, the reported small‐molecule systems lack wide dynamic range, have background activity in the absence of the small‐molecule controller, and are not biologically inert, while the optogenetic systems require prolonged exposure to high‐intensity light. We previously reported a small‐molecule‐controlled Cas9 system with some dosage and temporal control. By photocaging this Cas9 activator to render it biologically inert and photoactivatable, and employing next‐generation protein engineering approaches, we have built a system with a wide dynamic range, low background, and fast photoactivation using a low‐intensity light while rendering the small‐molecule activator biologically inert. We anticipate these precision controls will propel the development of practical applications of Cas9.