Autocorrelated 13c-13c double quantum coherence two-dimensional nmr spectroscopy: Utilization of a modified version of the technique as an adjunct in the total assignment of the 1h- and 13c-nmr spectra of the mutagen phenanthro[3,4-b]thiophene

Development of successively higher field nmr spectrometers has facilitated the study of increasingly more complex molecules, although smaller molecules such as phenanthro[3,4-b]thiophene still offer very substantial assignment problems because of the highly congested nature of their ¹H- and ¹³C-nmr spectra. Assignments of such spectra, if they are to be unequivocal, frequently require the utilization of two-dimensional nmr spectroscopic techniques. Total assignments of the ¹H- and ¹³C-nmr spectra of phenanthro[3,4-b]thiophene are reported. Assignments were based on a conventional high resolution 500 MHz ¹H-nmr spectrum, autocorrelated two-dimensional ¹H-nmr spectra (COSY), two-dimensional ¹H-¹³C chemical shift correlation spectra and a modified version of autocorrelated ¹³C-¹³C double quantum coherence two-dimensional nmr spectroscopy. From NOE measurements, a separation of 1.99 Å between H1 and H11 was computed, suggesting that phenanthro[3,4-b]thiophene has a pronounced helical conformation in solution.     

Syntheses of 3,7-dimethylpentadecan-2-ols from intermediates formed from co-oligomerisation reactions of butadiene with diethyl malonate and acetaldehyde

The products of the reaction of butadiene with diethyl malonate catalysed by a palladium complex and of butadiene with acetaldehyde catalysed by a nickel(0) complex have been used in two syntheses of 3,7-dimethylpentadecan-2-ol.     

SN2 reactions in the gas phase. Structure of the transition state

The alkylhalide-halide association ions, [RX₂]^? that are observed in the negative chemical ionization mass spectra of alkyl halides appear to be directly related to the corresponding S_N2 transition states in solution. ‘Frontside’ association of halide ions with bridgehead alkyl halides does not occur in our system. The Change in heats and entropies of association for the chloromethane series is consistent with delocalization in the [RX]₂^? ions.     

Phase dependent electrochemical properties of polar self-assembled monolayers (SAMs) modified via the fusion of mixed phospholipid vesicles

Unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and varying quantities of either 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol) (sodium salt) (DMPG) or 1,2-dimyristoyl-3-trimethylammonium-propane (chloride salt) (DMTAP) were used to deposit lipid bilayer assemblies on self-assembled monolayers (SAMs) on gold. The supporting SAMs in turn were composed of ferrocene-functionalized hexadecanethiol chains (FcC16SH) diluted to low coverage in 1-hydroxylhexadecanethiol (HOC16SH) or a single-component monolayer phase of the latter. The mass coverages of the DMPC/DMPG layers deposited in this way were measured using surface plasmon resonance (SPR) and found to decrease with an increasing content of DMPG in the vesicles. The SPR data show that the lipid assembly, while stable with respect to gentle rinsing in aqueous buffer, is reversible and the lipid adlayer is removable by immersion in a solvent such as ethanol. The effects of the adsorbed lipid layer on the electrochemical interactions of the hybrid lipid/SAM with several redox probes [e.g., K4Fe(CN)6, Ru(NH3)6Cl3, and CsHsFe-[(C5H4CH2N+H(CH3)2] were characterized using cyclic voltammetry (CV). At a composition of 5% DMPG in DMPC, the permeabilities of the probes through the lipid layer were affected significantly relative to that observed with a pure DMPC layer. These effects include a striking observation of an enhanced, ionic-charge-specific molecular discrimination of the electrochemical probes. At higher concentrations of the DMPG, significant permeation of the lipid adlayer was seen for all the probes. These latter changes are also attended by a significant increase in the capacitive currents measured in CV experiments as compared to those observed for either a pure SAM or one modified by only DMPC. This effect likely results from the influence of the charged lipid on the diffuse Gouy-Chapman electrolyte layer at the SAM interface. In contrast to the behaviors seen with DMPG, the incorporation of DMTAP into the adsorbed DMPC had no impact on the permeation of the adlayer by soluble redox probes as judged by the observed electrochemistry, a result that appears to correlate with a less ideal mixing of lipids in the DMPC/DMTAP system relative to that of a DMPC/DMPG mixture.     

Salting-out chromatography : Aliphatic and polyglycol ethers,carboxylic acids by roger sargent and wm. rieman

Distribution ratios of 15 ethers were determined with various ammonium sulfate eluents and were used to determine the conditions necessary for the separation of five-and seven-component mixtures by salting-out chromatography. The application of this technique was found to be less successful than ion-exchange chromatography for the separation of carboxylic acids.     

Characterization of cocoa butters and other vegetable fats by pyrolysis-mass spectrometry

Pyrolysis Mass Spectrometry (Py-MS) was used for the discrimination of cocoa butters from other vegetable fats. Mass spectra ranging from 50 amu to 250 amu were analyzed by principal component analysis (PCA) and with neural nets. The application of neural nets leads to a good discrimination between the two classes. Detailed analysis of the nets revealed that only the first 60 masses were used within the net. The use of PCA requires a careful selection of the number of masses included in the calculation. Canonical variance analysis was applied to determine the significant masses. Optimal performance of PCA was observed only using the first 22 significant masses. Most of these masses were different from the ones used by the neural net. It seems that the mass spectra obtained by Py-MS contain sufficient information for the discrimination of pure cocoa butter from other vegetable fats, but none of the methods seems to be able to extract all information available. Neural net provides a very robust method for this task and no prior data selection was necessary. Received: 13 May 1996 / Revised: 7 August 1996 / Accepted: 7 August 1996     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

A mass spectrometric investigation of non-covalent interactions between ruthenium complexes and DNA

Electrospray ionisation mass spectrometry was used to investigate reactions between six ruthenium compounds and three different non self-complementary duplex oligonucleotides containing 16 base pairs. Each of the compounds studied formed non-covalent complexes containing between one and five ruthenium molecules bound to DNA. Competition experiments involving duplex 16mers and pairs of ruthenium compounds were used to determine the order of relative binding affinities of the metal compounds. Other competition experiments involving ruthenium compounds, and the organic DNA binding agents daunomycin and distamycin, provided information about the sites and modes of DNA binding of the ruthenium compounds.     

Natural benzofurans. Synthesis of medicagol methoxybenzofuran

A general route to 2-arylbenzofurans, consisting of reaction of an o-halogenophenol ester with a cuprous arylacetylide, was employed to synthesize medicagol methoxybenzofuran. 2,4-Diraethoxyacetophenone was converted to 2,4-dimethoxyphenylacetylene in three steps and reaction of the cuprous salt with 2-iodo-4,5-methylenedioxyphenyl acetate gave the desired 2-(2′,4′-dimethoxyphenyl)-5,6-methylenedioxybenzofuran.     

Predicting adsorption isotherms of low-volatile compounds by temperature programmed desorption: iodine on carbon

Equilibrium adsorption isotherms for low-volatile compounds are extremely difficult to measure. A simple technique using temperature programmed desorption (TPD) is proposed. It is demonstrated that the two parameters needed for constructing the Langmuir isotherm can be derived with data from the TPD technique alone. Thus, the Langmuir isotherms of iodine on AX-21 super-activated carbon were obtained with this technique. A series of TPD experiments for samples with different initial loadings of iodine were carried out by varying the heating rates which resulted in different peak desorption temperatures. The peak desorption temperature decreased as the initial loading was increased because of the re-adsorption effect. The Langmuir constant was derived from kinetic theory with the activation energy for desorption obtained from the experiment. The activation energy for desorption was 12.3 kcal/mol. The Langmuir constants determined by this technique were in comparable order of magnitude to the reported values for iodine on activated carbon. The saturation capacity of AX-21 for iodine could also be determined from the TPD data obtained from samples with different initial loadings. The estimated saturation capacity from the TPD experiment was 2.96 g I(2)/g AX-21, which was close to the experimentally measured saturation capacity of 3.25 g I(2)/g AX-21 for the same system.