In Situ Study of the Surface Oxidation of FeCr Alloys Using Grazing Incidence X‐ray Absorption Spectroscopy (GIXAS)

The surface oxidation of FeCr alloys with 18, 28, and 43 mass‐% Cr was investigated in situ using grazing‐incidence X‐ray absorption spectroscopy (GIXAS) at the chromium and iron K‐edges. Oxidation in air was monitored in situ in the temperature range from 290 K to 680 K. The standard GIXAS data analysis is extended for the treatment of a single layer model in order to estimate the chromium concentrations of the oxide layer and of the near‐interface substrate as well as the oxide layer thickness. XANES analysis shows transitions from b.c.c. Fe to corundum type Fe₂O₃ and from b.c.c. Cr to corundum type Cr₂O₃. The initial oxide layers are 1.1‐1.4 nm thick and contain 60‐90 mass‐% chromium, while the near‐interface substrate is depleted in Cr. During heating, iron oxide growth dominates up to 560‐600 K. Then the chromium oxide layer loses its passivation effect and Cr oxidation sets in.     

Channel activity of a viral transmembrane peptide in micro-BLMs: Vpu(1-32) from HIV-1

We report for the first time on pore-suspending lipid bilayers, which we call micro-black lipid membranes (micro-BLMs), based on a highly ordered macroporous silicon array. Micro-BLMs were established by first functionalizing the backside porous silicon surface with gold and then chemisorbing 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol followed by spreading 1,2-diphytanoyl-sn-glycero-3-phosphocholine dissolved in n-decane. Impedance spectroscopy revealed the formation of single lipid bilayers confirmed by a mean specific capacitance of 0.6 +/- 0.2 microF/cm2. Membrane resistances were in the G omega-regime and beyond. The potential of the system for single channel recordings was demonstrated by inserting the transmembrane domain of the HIV-1 accessory peptide Vpu(1-32), which forms helix bundles with characteristic opening states. We elucidated different amilorides as potential drugs to inhibit channel activity of Vpu.     

AES investigations on starting powders for high performance ceramics

AES depth profiles on ceramic powders (untreated/hydrolyzed/oxidized/ (Al, Y)₂O₃ coated Si₃N₄, [BaO, SiO₂] coated Al₂O₃) are feasible on thin, homogeneous layers or m sized agglomerations prepared on an Au foil. By means of the depth profiles one can qualitatively characterize the coating around the particles. Factor analysis of the depth profiles on the differently treated Si₃N₄ powders suggests the existence of an Si₂N₂O phase on the oxidized sample.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

Distillation, on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS as a new combination for the determination of methylmercury in sediments and fish tissue

 Distillation as a way of sample digestion has been combined with on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS (high performance liquid chromatography – ultra violet – post column oxidation – cold vapour atomic absorption spectrometry) for the determination of methylmercury at background levels in sediments, soils and fish tissue. To prove the accuracy of this method, it was applied to sediment and fish tissue reference materials. The results correspond with the reference values within their error ranges. Excellent recoveries (92–95%) were obtained for the sediment samples by means of the standard addition method. The standard deviations of the sediment samples were within an acceptable range (7.2–12.5%), those of the fish samples were substantially lower (3.4–5.0%). The detection limit is 0.04 ng/g for 1 g sample weight. Received: 23 November 1995/Revised: 16 April 1996/Accepted: 20 April 1996     

Molekulare Zusammensetzung von flüssigem Schwefel. Teil: 3 Quantitative Analyse im Bereich 115–350°C

Molecular Composition of Liquid Sulfur. Part 3: Quantitative Analysis in the Temperature Region 115–350°C Relative concentrations of S₆, S₇, S₈, S_x (x > 8) and S_μ (insoluble sulfur) in equilibrium melts of elemental sulfur have been determined from i. r. and Raman spectra. At the freezing point (115°C) the melt consists of 0.6% S₆, 2.8% S₇, 1.5% S_x, and 95.1% S₈. – The solubility of S₇ in CS₂ has been determined at −77 to −26°C; the solubilities of both S₇ and S₈ in CS₂ are considerably enhanced by the presence of S_x. The thermal decomposition of S₈ and S_μ formation from S₆, S₇, and S_x has been investigated.     

IR and NMR Properties of Ionic Liquids: Do They Tell Us the Same Thing?

We used a combination of theoretical and experimental methods to derive the spectroscopic properties of imidazolium-based ionic liquids. Vibrational frequencies, NMR chemical shifts, and quadrupole coupling constants react in comparable manner to changes in the chemical environment. This suggests that both the IR and the NMR spectroscopic properties reflect a similar type of electronic perturbation caused by hydrogen bonding. These relationships of the spectroscopic properties provide detailed information about structural complexes and may thus serve as good indicators of ion-pair formation. They also help to decide which spectroscopic tool is the most sensitive for investigating molecular interactions. The measurement of only one spectroscopic property allows the prediction of other properties that cannot be so easily measured. In some cases, this is the only way to obtain reliable coupling constants for deriving molecular correlation times from macroscopic NMR relaxation times, thus opening a new path for studying structure-dynamics relations in ionic liquids.     

'Boomerang'-like insertion of a fusogenic peptide in a lipid membrane revealed by solid-state 19F NMR

Solid state (19)F NMR revealed the conformation and alignment of the fusogenic peptide sequence B18 from the sea urchin fertilization protein bindin embedded in flat phospholipid bilayers. Single (19)F labels were introduced into nine distinct positions along the wild-type sequence by substituting each hydrophobic amino acid, one by one, with L-4-fluorophenylglycine. Their anisotropic chemical shifts were measured in uniaxially oriented membrane samples and used as orientational constraints to model the peptide structure in the membrane-bound state. Previous (1)H NMR studies of B18 in 30% TFE and in detergent micelles had shown that the peptide structure consists of two alpha-helical segments that are connected by a flexible hinge. This helix-break-helix motif was confirmed here by the solid-state (19)F NMR data, while no other secondary structure (beta-sheet, 3(10)-helix) was compatible with the set of orientational constraints. For both alpha-helical segments we found that the helical conformation extends all the way to the respective N- and C-termini of the peptide. Analysis of the corresponding tilt and azimuthal rotation angles showed that the N-terminal helix of B18 is immersed obliquely into the bilayer (at a tilt angle tau approximately 54 degrees), whereas the C-terminus is peripherally aligned (tau approximately 91 degrees). The azimuthal orientation of the two segments is consistent with the amphiphilic distribution of side-chains. The observed 'boomerang'-like mode of insertion into the membrane may thus explain how peptide binding leads to lipid dehydration and acyl chain perturbation as a prerequisite for bilayer fusion to occur.     

Fused 1,2‐Dithioles. Part VII

The 1,2‐dithiolosultam derivative 14 was obtained from the (α‐bromoalkylidene)propenesultam derivative 9 (Scheme 1). Regioselective cleavage of the two ester groups (→ 1b or 2b ) allowed the preparation of derivatives with different substituents at C(3) in the dithiole ring (see 27 and 28 ) as well as at C(6) in the isothiazole ring (see 17 – 21 ; Scheme 2). Curtius rearrangement of the 6‐carbonyl azide 21 in Ac₂O afforded the 6‐acetamide 22 , and saponification and decarboxylation of the latter yielded ‘sulfothiolutin’ ( 30 ). Hydride reductions of two of the bicyclic sultams resulted in ring opening of the sultam ring and loss of the sulfonyl group. Thus the reduction of the dithiolosultam derivative 14 yielded the alkylidenethiotetronic acid derivative 33 (tetronic acid=furan‐2,4(3H,4H)‐dione), and the lactam‐sultam derivative 10 gave the alkylidenetetramic acid derivative 35 (tetramic acid=1,5‐dihydro‐4‐hydroxy‐2H‐pyrrol‐2‐one) (Scheme 3). Some of the new compounds ( 14, 22, 26 , and 30 ) exhibited antimycobacterial activity. The oxidative addition of 1 equiv. of [Pt(η²‐C₂H₄)L₂] ( 36a , L=PPh₃; 36b , L=1/2 dppf; 36c , L=1/2 (R,R)‐diop) into the S? S bond of 14 led to the cis‐(dithiolato)platinum(II) complexes 37a – c . (dppf=1,1′‐bis(diphenylphosphino)ferrocene; (R,R)‐diop={[(4R,5R)‐2,2‐demithyl‐1,3‐dioxolane‐4,5‐diyl]bis(methylene)}bis[diphenylphosphine]).