Nanotextured multicrystalline Al‐BSF solar cells reaching 18% conversion efficiency using industrially viable solar cell processes

We report recent achievements in adapting industrially used solar cell processes on nanotextured surfaces. Nanostructures were etched into c‐Si surfaces by dry exothermic plasma‐less reaction of F species with Si in atmospheric pressure conditions and then modified using a short post‐etching process. Nanotextured multicrystalline wafers are used to prepare Al‐BSF solar cells using industrially feasible solar cell proc‐ essing steps. In comparison to the reference acidic textured solar cells, the nanostructured cells showed gain in short circuit current (J_sc) of up to 0.8 mA/cm² and absolute gain in conversion efficiency of up to 0.3%. The best nanotextured solar cell was independently certified to reach the conversion efficiency of 18.0%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Monotone multigrid methods for elliptic variational inequalities II

Summary. We derive globally convergent multigrid methods for discrete elliptic variational inequalities of the second kind as obtained from the approximation of related continuous problems by piecewise linear finite elements. The coarse grid corrections are computed from certain obstacle problems. The actual constraints are fixed by the preceding nonlinear fine grid smoothing. This new approach allows the implementation as a classical V-cycle and preserves the usual multigrid efficiency. We give estimates for the asymptotic convergence rates. The numerical results indicate a significant improvement as compared with previous multigrid approaches. Received March 26, 1994 / Revised version received September 22, 1994     

The Baum-Connes conjecture via localisation of categories

We redefine the Baum-Connes assembly map using simplicial approximation in the equivariant Kasparov category. This new interpretation is ideal for studying functorial properties and gives analogues of the Baum-Connes assembly map for other equivariant homology theories. We extend many of the known techniques for proving the Baum-Connes conjecture to this more general setting.     

Ternäre Thallium-Indium-Sulfide: Eine Zusammenfassung

Ternary Thallium Indium Sulfides: A Summary Combined thermal and X-Ray analyses in the ternary system Thallium—Indium—Sulfur show, that the two binary sections Tl₂S? In₂S₃ and TlS? InS contain ternary compounds with unique crystal structures. The chemical formulas of these ternary solids are TlIn₅S₈, TlIn₃S₅, TlInS₂ and Tl₃InS₃ for the section Tl₂S? In₂S₃ and TlIn₅S₆ as well as Tl₃In₅S₈ (metastable high temperature phase) for the section TlS? InS respectively. With TlIn₅S₇ an additional ternary solid could be detected, which is located outside the two sections. It is derived from the binary mixed valence compound In₆S₇ by complete substitution of In⁺ by Tl⁺. The following ionic formulations make the mixed valence character of the ternary Thallium—Indium-Sulfides reasonable: TlIn₅S₈ = Tl⁺(In³⁺)₅(S^2?)₈, TlIn₃S₅ = Tl⁺ (In³⁺)₃(S^2?)₅, TlInS₂ = Tl⁺In³⁺(S^2?)₂, Tl₃InS₃ = (Tl⁺)₃In³⁺ · (S^2?)₃, TlIn₅S₆ = Tl⁺([In₂]⁴⁺)₂In³⁺ (S^2?)₆, Tl₃In₅S₈ = 4 × [(Tl⁺)_0,75 · (In⁺)_0,25In³⁺(S^2?)₂], TlIn₅S₇ = Tl⁺[In₂]⁴⁺ (In³⁺)₃(S^2?)₇. All compounds contain Tl⁺-ions in a characteristic “lone pair coordination” of S^2? ions. Indium atoms however occur with the oxidation numbers +2 (formal, In₂ dumb bells with covalent In? In bonding) and +3 (with In³⁺ in tetrahedral and octahedral coordination of S^2?). Chemical preparation, crystal chemistry and general properties of the ternary solids are discussed, summarized and compared to each other.     

Trans-cis isomerization is responsible for the red-shifted fluorescence in variants of the red fluorescent protein eqFP611

An important class of red fluorescent proteins (RFPs) feature a 2-iminomethyl-5-(4-hydroxybenzylidene)imidazolinone chromophore. Among these proteins, eqFP611 has the chromophore in a coplanar trans orientation, whereas the cis isomer is preferred by other RFPs such as DsRed and its variants. In the photoactivatable protein asFP595, the chromophore can even be switched from the nonfluorescent trans to the fluorescent cis state by light. By using X-ray crystallography, we have determined the structure of dimeric eqFP611 at high resolution (up to 1.1 A). In the far-red emitting eqFP611 variant d2RFP630, which carries an additional Asn143Ser mutation, the chromophore resides predominantly (approximately 80%) in the cis isomeric state, and in RFP639, which has Asn143Ser and Ser158Cys mutations, the chromophore is found completely in the cis form. The pronounced red shift of excitation and emission maxima of RFP639 can thus unambiguously be assigned to trans-cis isomerization of the chromophore. Among RFPs, eqFP611 is thus unique because its chromophore is highly fluorescent in both the cis and trans isomeric forms.     

On the Validity of Stokes–Einstein and Stokes–Einstein–Debye Relations in Ionic Liquids and Ionic‐Liquid Mixtures

Stokes–Einstein (SE) and Stokes–Einstein–Debye (SED) relations in the neat ionic liquid (IL) [C₂mim][NTf₂] and IL/chloroform mixtures are studied by means of molecular dynamics (MD) simulations. For this purpose, we simulate the translational diffusion coefficients of the cations and anions, the rotational correlation times of the C(2)? H bond in the cation C₂mim⁺, and the viscosities of the whole system. We find that the SE and SED relations are not valid for the pure ionic liquid, nor for IL/chloroform mixtures down to the miscibility gap (at 50 wt % IL). The deviations from both relations could be related to dynamical heterogeneities described by the non‐Gaussian parameter α(t). If α(t) is close to zero, at a concentration of 1 wt % IL in chloroform, both relations become valid. Then, the effective radii and volumes calculated from the SE and SED equations can be related to the structures found in the MD simulations, such as aggregates of ion pairs. Overall, similarities are observed between the dynamical properties of supercooled water and those of ionic liquids.     

Interaction of zinc oxide clusters with molecules related to the sulfur vulcanization of polyolefins ("rubber")

The vulcanization of rubber by sulfur is a large‐scale industrial process that is only poorly understood, especially the role of zinc oxide, which is added as an activator. We used the highly symmetrical cluster Zn₄O₄ (T_d) as a model species to study the thermodynamics of the initial interaction of various vulcanization‐related molecules with ZnO by DFT methods, mostly at the B3LYP/6‐31+G* level. The interaction energy of Lewis bases with Zn₄O₄ increases in the following order: CO62H₄3H₆2S₂<1,4‐C₅H₈2O2S3N?CH₃COO^?. The corresponding binding energies range from ?57 to ?262 kJ mol^?1. However, Brønsted acids react with the Zn₄O₄ cluster with proton transfer from the ligand molecule to one of the oxygen atoms of Zn₄O₄, and these reactions are all strongly exothermic [binding energies [kJ mol^?1] in parentheses: H₂O (?183), MeOH (?171), H₂S (?245), MeSH (?230), C₃H₆ (?121), and CH₃COOH (?255)]. The important vulcanization accelerator mercaptobenzothiazole (C₇H₅NS₂, MBT) containing several donor sites reacts with the Zn₄O₄ cluster with proton transfer from the NH group to one of the oxygen atoms of ZnO, and in addition the exocyclic thiono sulfur atom and the nitrogen atom coordinate to one and the same zinc atom, resulting in a binding energy of ?247 kJ mol^?1. A second isomer of [(MBT)Zn₄O₄] with a strong O? H???N hydrogen bond rather than a Zn? N bond is only slightly less stable (binding energy ?243 kJ mol^?1). The NH form of free MBT is 36 kJ mol^?1 more stable than the tautomeric SH form, while the sulfurized MBT derivative benzothiazolyl hydrodisulfide C₇H₅NS₃ (BtSSH) is most stable with the connectivity >CSSH.     

Development and validation of a method for the determination of trace alkylphenols and phthalates in the atmosphere

An analytical method has been developed for the simultaneous extraction and determination of trace tertiary octylphenol (t-OP), technical nonylphenol isomers (NP), nonylphenol monoethoxylate isomers (NP1EO) and seven phthalates in the atmosphere using gas chromatography-mass spectrometry (GC-MS). High volume samples were collected using a high-volume pump equipped with a PUF/XAD-2 column for air and glass fiber filter for particles. The detection limits of the method for alkylphenols (APs) and the phthalates ranged from 0.0006 to 0.034 ng m⁻³ in air. The recoveries of t-OP, NP, NP1EO and the phthalates for the entire procedure were satisfactory (>69%). The method was successfully applied to the determination of the analytes in the atmosphere samples collected over land and the ocean. The concentrations of t-OP, NP, NP1EO showed decline trends from land to the open sea, and the phthalates present over land and the North Sea were comparable. It is suggested that the atmosphere is a significant pathway for the transport of alkylphenols and the phthalates in the environment.