Heteronuclear NOE spectroscopy of ionic liquids

(19)F,(1)H HOESY experiments with three ionic liquids ([bmim]BF(4), [bmim]PF(6) and [emim]BF(4)) were run in two different solvents and neat. The results give preferred probabilities of presence and enable us to systematically study interactions between the cations and the anions in the ionic liquid phase by NMR spectroscopy. The influence of different solvents and of the presence or absence of air (i.e. oxygen) is discussed. This enabled us to substantially speed up the NMR experiments and to develop a more precise method for the investigation of liquid-phase structures in ionic liquids.     

Microprobe sampling—Photo ionization-time-of-flight mass spectrometry for in situ chemical analysis of pyrolysis and combustion gases: Examination of the thermo-chemical processes within a burning cigarette

A microprobe sampling device (μ-probe) has been developed for in situ on-line photo ionization mass spectrometric analysis of volatile chemical species formed within objects consisting of organic matter during thermal processing. With this approach the chemical signature occurring during heating, pyrolysis, combustion, roasting and charring of organic material within burning objects such as burning fuel particles (e.g., biomass or coal pieces), lit cigarettes or thermally processed food products (e.g., roasting of coffee beans) can be investigated. Due to its dynamic changes between combustion and pyrolysis phases the cigarette smoking process is particularly interesting and has been chosen as first application. For this investigation the tip of the μ-probe is inserted directly into the tobacco rod and volatile organic compounds from inside the burning cigarette are extracted and real-time analyzed as the glowing front (or coal) approaches and passes the μ-probe sampling position. The combination of micro-sampling with photo ionization time-of-flight mass spectrometry (PI-TOFMS) allows on-line intrapuff-resolved analysis of species formation inside a burning cigarette. Monitoring volatile smoke compounds during cigarette puffing and smoldering cycles in this way provides unparalleled insights into formation mechanisms and their time-dependent change. Using this technique the changes from pyrolysis conditions to combustion conditions inside the coal of a cigarette could be observed directly. A comparative analysis of species formation within a burning Kentucky 2R4F reference cigarette with μ-probe analysis reveals different patterns and behaviors for nicotine, and a range of semi-volatile aromatic and aliphatic species.     

Amperometric enzyme electrodes for the determination of volatile alcohols in the headspace above fruit and vegetable juices

The surface of a glassy carbon electrode (GCE) was modified by electropolymerization of acridine red followed by drop-coating of graphene. The morphology was characterized by scanning electron microscopy. Uric acid (UA) is effectively accumulated on the surface of the modified electrode and generates a sensitive anodic peak in solutions of pH 6.5. Differential pulse voltammetry was used to evaluate the electrochemical response of the modified GCE to UA. Compared to the bare GCE, the GCE modified with acridine red, and to the graphene modified electrode, the new GCE displays high electrochemical activity in giving an oxidation peak current that is proportional to the concentration of UA in the range from 0.8 to 150?μM, with a detection limit of 0.3?μM (at an S/N of 3). The modified electrode displays excellent selectivity, sensitivity, and a wide linear range. It has been applied to the determination of UA in real samples with satisfactory results.

Metrological concept for comparable measurement results under the European water framework directive: demonstration of its applicability in elemental analysis

Within the scope of a project of the “European Association of National Metrology Institutes??(EURAMET), a European metrological dissemination system (network) providing traceable reference values assigned to matrix materials for validation purposes is described and put to the test. It enables testing laboratories (TL) to obtain comparable results for measurements under the “EU Water Framework Directive 2000/60/EC??(WFD) and thus, to comply with a core requirement of this very directive. The dissemination system is characterized by the fact that it is available to all laboratories throughout Europe which intend to perform measurements in the context of the WFD and that it can ensure sustainable metrological traceability to the International System of Units (SI) as a reference point for the measurement results. This dissemination system is set up in a hierarchical manner and links up the level of the national metrology institutes (NMI) with that of the TLs via an intermediate level of calibration laboratories (CL) by comparison measurements. The CLs are expert laboratories with respect to the measurement of the analytes considered here (within the project, the CLs are called potential calibration laboratories (PCL)) and are additionally involved in the organization of comparison measurements within the scope of regional quality assurance (QA) systems. Three comparison measurements have been performed to support the approach. A total of about 130 laboratories participated in this exercise with the focus on the measurement of the priority substances Pb, Cd, Hg, and Ni defined in the WFD. The elemental concentrations in the water samples roughly corresponded to one of the established environmental quality standards (EQS), the annual average concentration (AA-EQS), which is defined in the daughter Directive 2008/105/EC of the WFD. It turned out that a significant number of TLs still need to improve their measurement methods in order to be able to fulfill the minimum requirements of the WFD, in particular, with regard to the elements Cd and Hg probably due to their low EQS values. Furthermore, it became obvious that the hierarchical dissemination system suggested here actually corresponds to the measuring capabilities of the three participating groups (NMIs, PCLs, and TLs).     

Ionization of aniline and its N-methyl and N-phenyl substituted derivatives by (free) electron transfer to n-butyl chloride parent radical cations

The electron transfer from aniline and its N-methyl as well as N-phenyl substituted derivatives (N-methylaniline, N,N-dimethylaniline, diphenylamine, triphenylamine) to parent solvent radical cations was studied by electron pulse radiolysis in n-butyl chloride solution. The ionization results in the case of aniline (ArNH2) and the secondary aromatic amines (Ar2NH, Ar(Me)NH) in the synchronous and direct formation of amine radical cations, as well as aminyl radicals, in comparable amounts. Subsequently, ArNH2*+ deprotonates in a delayed reaction with the present nucleophile Cl-, and forms further ArNH*. In contrast, tertiary aromatic amines such as triphenylamine and dimethylaniline yield primarily the corresponding amine radical cations Ar3N*+ or Ar(Me2)N*+, only. The persistent Ar3N*+ forms a charge transfer complex (dimer) with the parent amine molecule, whereas Ar(Me2)N*+ deprotonates to carbon-centered radicals Ar(Me)NCH2*.     

Synthesis of Nanocrystalline Zr3N4 and Hf3N4 Powders from Metal Dialkylamides

A simple process to synthesize Zr₃N₄ and nitrogen‐rich Hf₃N₄ powders via ammonolysis of metal dialkylamides, i.e. Zr(NEt₂)₄ and Hf(NEt₂)₄, at temperatures below 700 °C is presented. The obtained nitrides have a rhombohedrally distorted NaCl‐type structure, which has previously been reported only for nitrogen‐rich films of these nitrides. Regardless of the atmosphere (N₂ and He), the Zr₃N₄ starts to decompose above about ～ 650 °C and achieves the highest decomposition rate at about 900 °C, finally yielding the mononitride ZrN. Both Zr₃N₄ and Hf₃N₄ powders are nanocrystalline with the crystal size of about 2 nm.     

The Mechanical Deformation Process of Electrospun Polymer Nanocomposite Fibers

Summary: The mechanical deformation processes of poly(methyl methacrylate)/ montmorillonite nanocomposites and their electrospun fibers were investigated by in situ tensile tests under a transmission electron microscope depending on their morphology. While the polymer nanocomposites deformed in a brittle manner, i.e., crazing, the electrospun polymer nanocomposite fibers deformed through a shear flow process leading to “nanonecking” due to the strong overlap of stress fields caused by nanopores within the fiber under a uniaxial tensile load. This unique change in deformation behavior provides the possibility that the intrinsic brittle material could be manipulated to be ductile without sacrificing its other attractive properties through a well‐controlled electrospinning process.

TEM micrograph of a low temperature fractured fiber showing the nanoporous surface structure.     

Termination rate coefficients derived from PLP-SEC data

A novel procedure is outlined by which the termination rate coefficient, k_t, may be deduced from molecular weight and monomer conversion data of pulsed laser polymerization (PLP) – size exclusion chromatography (SEC) experiments. For this k_t analysis only the central part of the molecular weight distribution (MWD) between the first point of inflection (POI), that is also used for k_p analysis, and the third such POI is taken into account. Within this region a characteristic ratio of areas under the MWD is fitted either by using PREDICI or by applying a lumping scheme method. The success of the lumping scheme procedure is demonstrated for the bulk polymerization of butyl methacrylate. The k_t values derived by this method refer to small initial degrees of monomer conversion as are typical of PLP-SEC investigations. The relatively fast and efficient lumping scheme technique is restricted to situations where k_t may be considered independent of chain length and where chain transfer processes are not important.