Investigation of the pharmacokinetics of celecoxib by liquid chromatography-mass spectrometry

A new method for the quantification of celecoxib in human plasma based on reversed-phase high-performance liquid chromatography (HPLC) coupled to atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) after liquid-liquid extraction is presented. The method is rapid, sensitive and highly selective. The retention time of celecoxib was 2.3 min. The limit of quantification was 5 microg/L. Rofecoxib was used as internal standard. After validation, the method was used to study the pharmacokinetic profile of celecoxib following administration of a single oral dose (200 mg) in 12 healthy volunteers. Since celecoxib should be metabolized primarily by cytochrome 2C9 (CYP2C9), a poor metabolizer (PM) for this cytochrome P450 enzyme was included in the study. Pharmacokinetic characteristics (mean +/- SD) of extensive metabolizers (EM) were t(max) 2.9+/-1.2h, c(max) 842+/-280 microg/L, AUC(infinity) 6246+/-2147 microg h/L and t(1/2) 7.8+/-2.7h. The area under the curve (AUC(infinity)) for the PM was 12561 microg h/L. However, we found no noticeable increase in half life in the PM (11.5 h) after a single dose of celecoxib.     

Sequentially photocleavable protecting groups in solid-phase synthesis

[reaction: see text] A sequential solid-phase peptide synthesis was developed using both photolabile linker and protecting groups. The chromatic sequential lability between a tert-butyl ketone-derived linker (sensitive to irradiation at 305 nm) and a nitroveratryloxycarbonyl (NVOC) group (sensitive at 360 nm) was exploited to prepare Leu-Enkephalin in a 55% overall yield. This new strategy allows the preparation of peptides in essentially neutral medium, by avoiding the use of common deprotection reagents such as trifluoroacetic acid or piperidine.     

Elimination of bremsstrahlung in activation analysis by the deflection of β-particles in a magnetic field

The structureless background at X-ray and low energy -ray region, resulting from bremsstrahlung due to the stopping of -radiations, causes serious problems in nuclear spectroscopy. In this study, in order to reduce the background and therefore to increase the sensitivity of the nuclear analytical technique and the number of elements observable, a methodology is developed to deflect the -particles by a magnetic field. The experimental setup consists of a permanent magnet /1 kG/, Ge/Li/ solid-state detector, and multichannel analyzer.     

Cyclodextrin Solubilization of the Antibacterial Agents Triclosan and Triclocarban: Effect of Ionization and Polymers

The natural β-cyclodextrin (βCD) and its complexes have limited solubility in aqueous solutions. This low aqueous solubility, as well as low aqueous solubility of the guest molecule (i.e. triclosan or triclocarban (TCC)), can result in low complexation efficiency (CE). The purpose of this study was to enhance the apparent intrinsic solubility (S ₀) of the guest molecule and its βCD complexes through ionization and addition of auxiliary compounds such as polymers, amino acids and metal ions. Both triclosan (pK _a 7.9) and TCC (pK _a 12.7) are weak acids. Addition of ethanol to the complexation medium enhanced S ₀ of both triclosan and TCC but at the same time ethanol lowered the stability constant (K _c ) of their βCD complexes resulting in overall lowering of CE. Addition of small amount of water-soluble polymers enhanced the βCD solubilization of both guests, and addition lysine enhanced the solubilization of TCC. Ionization of triclosan resulted in significant enhancement of CE and enhanced triclosan release from tablets containing triclosan/βCD complex. The effect of ionization was not as pronounced in the case of TCC.This revised version was published online in July 2005 with a corrected issue number.     

Removal of strontium ions by a crosslinked copolymer containing methacrylic acid functional groups</p> </p>

Summary A tail-made polymer matrix is proposed to remove strontium ions from aqueous solutions. The removal behavior of strontium ions on a crosslinked copolymer containing methacrylic acid as functional groups was investigated as a function of sorptive concentration, time, temperature and pH. It was observed that an increase of these parameters enhanced the removal of Sr(II) ions from aqueous solution. It is found that a maximum adsorption of Sr(II) ions can be obtained on the crosslinked copolymer after 30 minutes and at pH 8. The increase of Sr(II) ion concentration in the solution resulted in an increase in the amount of Sr(II) ions adsorbed on the crosslinked copolymer containing methacrylic acid as functional groups. However, after a maximum of Sr(II) concentration in the solution, the percentage of adsorbed Sr(II) ions decreased. The adsorption data are well represented by the Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. The adsorption capacity of the copolymer and the free energy change were calculated by using the D-R isotherm. For the adsorption of Sr(II) ions on the crosslinked copolymer the thermodynamic parameters (DH°,DS° andDG°) were calculated.</p> </p>     

Fermentation of a skim milk concentrate with Streptococcus thermophilus and chymosin: structure, viscoelasticity and syneresis of gels

Fermentation of a reconstituted skim milk concentrate (8% protein) was investigated to elucidate the effects of various fermentation parameters on the structural, rheological and visual (wheying-off) properties of the resulting gels (pH 4.60). Fermentation trials were performed with non-exocellular polysaccharide-producing strains of Streptococcus thermophilus at various fermentation temperatures and at various chymosin levels. Oscillatory vane rheometry carried out on the intact gels (at 4 °C) showed that the level of chymosin had a significant impact on the gel strength (storage modulus G′). This can be explained by the arrangement of casein micelles into more compact aggregates and the enhanced fusion of aggregated casein micelles as revealed by transmission electron microscopy for the gels fermented with chymosin. Wheying-off of the stirred gels as measured by a centrifugation test (at 4 °C) and pore size of the intact gel structures investigated by scanning electron microscopy both increased with increasing level of chymosin and increasing fermentation temperature (resulting in an increase in acidification rate). A higher level of syneresis (wheying-off) is explained by the larger pore size, since larger pores present a lower resistance to the outflow of whey from the gel.     

Determination of trace elements in Na-bentonitic clay by INAA in Turkey

Instrumental neutron activation analysis was applied to the determination of trace elements in a Na-bentonitic clay. The irradiation was done in the Triga Mark II type reactor of ITU Nuclear Energy Institute. The sample was irradiated in two steps for short- and long- lived isotopes. After irradiation, spectra were taken using a germanium detector, multichannel analyzer Canberra System 100 and a fitting program called Sampo 90. The spectra of short-lived isotopes were analyzed to determine Al, Mg, Na, K, Ca, Ti elements and Mn, V trace elements. The spectra of long-lived isotopes were analyzed to determine Sc, Br, Sb, Cs, La, Ce, Sm, Yb, Hf, Pa, Np trace elements.     

Natural radioactivity in soil samples of Kocaeli basin, Turkey

The city of Kocaeli is in the western part of Anatolia in Turkey and has a population of approximately 1.000.000. There is no information about radioactivity in the Kocaeli soils samples so far. For this reason, the concentrations of the natural radionuclides in soil samples from 27 different sampling stations in Kocaeli Basin and its surroundings have been determined. The results have been compared with other radioactivity measurements in different country"s soils. The typical concentrations of ¹³⁷Cs, ²³⁸U, ⁴⁰K, ²²⁶Ra, ²³²Th found in surface soil samples ranged from 2±0.6 to 25±6 Bq/kg, from 11±4 to 49±10 Bq/kg, from 161±30 to 964±127 Bq/kg, from 10±4 to 58±11 Bq/kg, and from 11±3 to 65±13 Bq/kg, respectively.     

Determination of organophosphorus, triazine and 2,6-dinitroaniline pesticides in aqueous samples via solid-phase microextraction (SPME) and gas chromatography with nitrogen-phosphorus detection

Solid-phase microextraction (SPME) represents a very simple and rapid method for the extraction of organophosphorus, triazine and 2,6-dinitroaniline pesticides from aqueous samples without making use of any solvents. The same fiber can be used repeatedly. Moreover, a sample volume as small as 3 mL can be employed with no loss in sensitivity. 34 compounds have been extracted from aqueous samples by SPME using a 85 m polyacrylate fiber. For organophosphorus pesticides, a 100 m polydimethylsiloxane fiber has been used additionally for comparison. The fibers were directly introduced into the heated split/splitless injector of the gas chromatograph and determined using a nitrogen-phosphorus detector. The method was evaluated with respect to the limit of detection (LOD), linearity and precision. The limit of detection (LOD) depends on the compound and varies from 0.005–0.09 g/L. The method is linear over at least three orders of magnitude with coefficients of correlation usually >0.999. For triazines and 2,6-dinitroanilines the coefficient of variation (precision) is <8% while for organophosphorus compounds it may reach values up to 18% (however, if the latter compounds are extracted using the polydimethylsiloxane phase considerably higher precision is achieved). The partitioning of the analyte between the aqueous phase and the polymeric phase depends on the hydrophobicity of the compound as expressed by the octanol/water partitioning coefficient (P_ow). For triazines it was shown that there is a linear dependence of the logarithm of the analyte response on the log(P_ow) i.e. the higher the hydrophobicity, the higher the affinity of the analytes to the polymeric phase of the fiber and the higher the response. Salt addition has a strong effect on the extraction efficiency. This effect increases with decreasing hydrophobicity (increasing polarity) of the compound. The triazines ametryn, atrazine, propazine, simazine and simetryn have been identified in a ground water well sample by SPMEGC/NPD.     

Leaching of uranium with the H2O2-Na2SO4-H2SO4 (HSS) system and the efficiency of Acigol Lake water

The applicability of a new leaching method, the HSS (H₂O₂-Na₂SO₄-H₂SO₄) system, in the extraction of uranium from Saricaolu-Bergama Region low grade ore, and the efficiency of Acigol Lake (Denizli)-Turkey water as a natural source of Na₂SO₄ has been investigated. The effect of H₂SO₄ concentration, temperature, leaching time, H₂O₂ and Na₂SO₄ concentrations and the amount of Acigol Lake water on the extraction of uranium was examined. HSS was found suitable for the extraction of uranium from Saricaolu-Bergama Region samples and it was observed that the acid consumption could be decreased by adding Na₂SO₄.