Profiling and characterisation by liquid chromatography/multi-stage mass spectrometry of the chlorogenic acids in Gardeniae Fructus

The chlorogenic acids of Gardeniae Fructus used traditionally as a Chinese herbal medicine (zhizi) have been investigated qualitatively by liquid chromatography/multi-stage mass spectrometry (LC/MS(4)). Twenty-nine chlorogenic acids were detected and twenty-five characterised to regioisomer level on the basis of their fragmentation, twenty-four for the first time from this source. Assignment to the level of individual regioisomers was possible for three caffeoylquinic acids, three dicaffeoylquinic acids, three sinapoylquinic acids, four caffeoyl-sinapoylquinic acids, two feruloyl-sinapoylquinic acids, one p-coumaroyl-sinapoylquinic acid, three (3-hydroxy, 3-methyl)glutaroylquinic acids, two (3-hydroxy, 3-methyl)glutaroyl-feruloylquinic acids, one (3-hydroxy, 3-methyl)glutaroyl-dicaffeoylquinic acid, and one (3-hydroxy, 3-methyl)glutaroyl-caffeoyl-feruloylquinic acid. Six (3-hydroxy, 3-methyl)glutaroyl-caffeoylquinic acids were detected and two were tentatively assigned as 3-caffeoyl-4-(3-hydroxy, 3-methyl)glutaroylquinic acid and 3-caffeoyl-5-(3-hydroxy, 3-methyl)glutaroylquinic acid. The (3-hydroxy, 3-methyl)glutaroyl residue modifies the mass spectral fragmentation behavior and elution sequence compared with the chlorogenic acids that contain only a cinnamic acid residue(s). Fourteen of these twenty-nine chlorogenic acids have not previously been reported from any source.     

Validated ultra-performance liquid chromatography tandem mass spectrometry method for the determination of pramipexole in human plasma

A sensitive and high throughput ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS-MS) method has been developed for the determination of pramipexole, a dopamine agonist, in human plasma. Sample preparation involved liquid-liquid extraction of pramipexole and ranitidine as the internal standard (IS) in ethyl acetate from 100 μL human plasma. The chromatographic separation is achieved on a Waters Acquity UPLC BEH C18 (100 mm × 2.1 mm, 1.7 μm) analytical column using an isocratic mobile phase, consisting of 10 mM ammonium formate (pH 7.50)-acetonitrile (15:85, v/v), at a flow-rate of 0.5 mL/min. The precursor → product ion transition for pramipexole (m/z 212.1 → 153.0) and IS (m/z 315.0 → 176.1) were monitored on a triple quadrupole mass spectrometer, operating in the multiple reaction monitoring (MRM) and positive ion mode. The method was validated over a wide dynamic concentration range of 20-4020 pg/mL. Matrix effect is assessed by post-column infusion experiment and the process efficiency were 91.9% and 85.7% for pramipexole and IS, respectively. The method is rugged and rapid with a total run time of 1.5 min and is applied to a bioequivalence study of 0.25 mg PPX tablet formulation in 30 healthy Indian male subjects under fasting condition.     

Investigation of surface plasmon biosensing using gold nanoparticles enhanced ellipsometry

We present a label-free, nondestructive and high sensitivity biosensor by using the phase information of a gold nanoparticles enhanced ellipsometry signal. The refractive index (RI) resolution from ellipsometric phase information is of the order of 1.6×10(-6) RI units. Furthermore, spectroscopic and dynamic measurements show substantial change in the phase signal when biomolecules are coated on gold nanoparticles. The detection limit of our proposed technique is up to ～18?pM concentration of the target biomolecules.     

Principal eigenvector field segmentation for reproducible diffusion tensor tractography of white matter structures

The study was aimed to test the feasibility of utilizing an algorithmically determinable stable fiber mass (SFM) map obtained by an unsupervised principal eigenvector field segmentation (PEVFS) for automatic delineation of 18 white matter (WM) tracts: (1) corpus callosum (CC), (2) tapetum (TP), (3) inferior longitudinal fasciculus (ILF), (4) uncinate fasciculus (UNC), (5) inferior fronto-occipital fasciculus (IFO), (6) optic pathways (OP), (7) superior longitudinal fasciculus (SLF), (8) arcuate fasciculus (AF), (9) fornix (FX), (10) cingulum (CG), (11) anterior thalamic radiation (ATR), (12) superior thalamic radiation (STR), (13) posterior thalamic radiation (PTR), (14) corticospinal/corticopontine tract (CST/CPT), (15) medial lemniscus (ML), (16) superior cerebellar peduncle (SCP), (17) middle cerebellar peduncle (MCP) and (18) inferior cerebellar peduncle (ICP). Diffusion tensor imaging (DTI)-derived fractional anisotropy (FA) and the principal eigenvector field have been used to create the SFM consisting of a collection of linear voxel structures which are grouped together by color-coding them into seven natural classes to provide PEVFS signature segments which greatly facilitate the selection of regions of interest (ROIs) for fiber tractography using just a single mouse click, as compared with a manual drawing of ROIs in the classical approach. All the 18 fiber bundles have been successfully reconstructed, in all the subjects, using the single ROIs provided by the SFM approach, with their reproducibility characterized by the fact that the ROI selection is user independent. The essentially automatic PEVFS method is robust, efficient and compares favorably with the classical ROI methods for diffusion tensor tractography (DTT).     

Formation and stability criteria for amorphous Ge alloy films

Formation and stability of room-temperature deposited amorphous (a-) alloy films of Ge with Ag, Au, Cu, Ni, Fe, Ga, In, Sn, Sb, Ni, Bi and Nb have been studied, using differential thermal analysis and electron microscopy, as a function of various parameters such as: solubility of alloying element (in c-Ge), its melting point, atomic size and electonegativity. It has been shown that the composition range R, up to which amorphous alloy films are obtained, is affected by the solubility of the alloying element and its melting point. The effect of solubility S is dominant when S > 1 at%. However, for $\text{S ? 1}\text{at}\text{\%}$, the range is entirely governed by the melting point of the alloying element. Solubility and melting point have also been found to play a decisive role in stabilizing the amorphous phase of Ge. However, atomic size and electronegativity differences do not seem to play any important role in either the formation or stability of the amorphous phase.     

Implantation of the 111In/Cd Probe as InO− Ion for Radioisotope Tracer Studies

A radioisotope ion implanter has been developed using a cesium-sputtering, negative ion source, which offers versatility and sustained operation. Employing the molecular ¹¹¹In¹⁶O⁻ ion, μCi activities of the radioisotope probe ¹¹¹In/Cd have been implanted into different material hosts. The implanted tracer activity has been shown to be sufficient for LTNO, NMRON and PAC. A new NMRON resonance for ¹¹¹InAg was observed at 75.08 MHz. In₂O₃ powder performed well as the radioisotope carrier in the ion source, with the ratio of radioisotope and parasitic ion current being typically 4 × 10⁻⁴.     

Fenugreek hydrogel–agarose composite entrapped gold nanoparticles for acetylcholinesterase based biosensor for carbamates detection

A biosensor was fabricated to detect pesticides in food samples. Acetylcholinesterase was immobilized in a novel fenugreek hydrogel–agarose matrix with gold nanoparticles. Transparent thin films with superior mechanical strength and stability were obtained with 2% fenugreek hydrogel and 2% agarose. Immobilization of acetylcholinesterase on the membrane resulted in high enzyme retention efficiency (92%) and a significantly prolonged shelf life of the enzyme (half-life, 55 days). Transmission electron microscopy revealed that, gold nanoparticles (10–20 nm in diameter) were uniformly dispersed in the fenugreek hydrogel–agarose–acetylcholinesterase membrane. This immobilized enzyme-gold nanoparticle dip-strip system detected various carbamates, including carbofuran, oxamyl, methomyl, and carbaryl, with limits of detection of 2, 21, 113, and 236 nM (S/N = 3), respectively. Furthermore, the fabricated biosensor exhibited good testing capabilities when used to detect carbamates added to various fruit and vegetable samples.     

Review of heat transport properties of solar heat transfer fluids

The present article reviews the test techniques for some of the important heat transport properties of oils such as viscosity, density, specific heat capacity and thermal conductivity mainly used for characterization of heat transfer fluids. It can be seen that while density of oils can be tested at higher temperatures, the other heat transport properties of oils like viscosity, specific heat capacity and thermal conductivity have a limitation of being tested at low temperatures below 100–150 °C. While quite a few number of researchers have reported evaluation of heat transfer properties like specific heat capacity and thermal conductivity of oils by different methods, there remains a huge scope of debate and discussions on the repeatability and reproducibility of such tests, especially in case of oils used in high-temperature applications. A lot of insight has been gathered with respect to testing of thermal conductivity of oils, and several common test methods have been compared with each other. Lastly, two mathematical models, reported in the literature in open domain, have been reviewed and compared with each other. If the oils are to be used at elevated temperatures, like heat transfer fluids used in concentrated solar power generation where temperatures go as high as 400 °C and beyond, there is an urgent need to standardize a laboratory test method for performance evaluation of heat transport properties, which can help in formulating new generation oils based on novel chemistries and technologies like nanofluids, synthetic oils of novel chemistries, molten salts and molten metals.     

An innovative extensional viscometer for low-viscosity and low-elasticity liquids

A spinline-type extensional viscometer is described in which an innovative method of tensile stress measurement is employed. A limited amount of liquid flows through a vertical capillary at a constant flow rate under the influence of a constant pressure head. The drainage time decreases when the liquid stream leaving the capillary is stretched by the application of vacuum. These drainage times are measured in a manner similar to that used for intrinsic viscosity measurements. The measured difference in drainage times, with and without stretching, is trivially related to the extensional stress at the capillary exit, and this provides a very simple method of accurately determining fluid stretching forces having a magnitude as low as 10^-4 N; stresses at other axial locations in the stretched liquid jet are obtained by means of a force balance in the usual manner. The validity of the proposed technique is demonstrated by obtaining the expected results for a Newtonian oil having a shear viscosity of 56.2 mPa-s. Also presented are preliminary data on polyethylene oxide-in-water solutions having an even lower shear viscosity.