Cholesterol biosensor based on amino-undecanethiol self-assembled monolayer using surface plasmon resonance technique

Cholesterol oxidase has been covalently immobilized onto 11-amino-1-undecanethiol hydrochloride (AUT) self-assembled monolayer (SAM) fabricated on gold (Au) substrates using glutaraldehyde as a cross-linker. These ChOx/AUT/Au bioelectrodes characterized using contact angle (CA) measurements; electrochemical technique and atomic force microscopy (AFM) have been utilized for the estimation of cholesterol in solution using the surface plasmon resonance (SPR) technique. These biosensing electrodes exhibiting linearity from 50 to 500 mg/dL of cholesterol in solution and sensitivity of 1.23 m0/(mg dL), can be used more than 20 times and have a shelf life of about 10 weeks when stored at 4 degrees C.     

Carboxyketenes from 4-hydroxy-1,3-oxazin-6-ones and Meldrum's acid derivatives

New 4-hydroxy-1,3-oxazin-6-ones 8 and 16 were prepared from chlorocarbonyl(phenyl)ketene and amides. The flash vacuum thermolysis (FVT) reactions of these compounds and the 4-methoxy derivative 17 were investigated by Ar matrix isolation IR spectroscopy and online mass spectrometry including MS/MS analysis. Carboxy(phenyl)ketene 10 is formed as the major product by thermal fragmentation of 4-hydroxy-1,3-oxazin-6-one 8. This takes place via the unstable 6-hydroxy tautomer 9. Another tautomer, the 5H-isomer 12, leads to the formation of benzoyl isocyanate 13 as a minor product together with phenylketene 14. Carboxy(phenyl)ketene 10 remains detectable at high FVT temperatures but undergoes thermal decarboxylation to phenylketene 14. The same carboxy(phenyl)ketene 10 is also produced in significant amounts by FVT of 5-phenyl-Meldrum's acid 18 via the unstable enol tautomer 19. A small amount of the unsubstituted carboxyketene 20 is observable on FVT of Meldrum's acid 1 itself.     

An unusual, mild and convenient one-pot two-step access to (E)-stilbenes from hydroxy-substituted benzaldehydes and phenylacetic acids under microwave activation: a new facet of the classical Perkin reaction

A mild and convenient one-pot two-step synthesis of hydroxystilbenes with trans selectivity has been developed through a modified Perkin reaction between benzaldehydes and phenylacetic acids bearing 4- or 2-hydroxy substitution at the aromatic ring, in the presence of piperidine-methylimidazole and polyethylene glycol under microwave irradiation. The observation of a simultaneous condensation-decarboxylation leading to the unusual formation of hydroxystilbenes in lieu of α-phenylcinnamic acid reveals an interesting facet to the classical Perkin reaction. The developed protocol provides a green alternative to the prevalent methods employing a toxic decarboxylating agent in the form of quinoline/Cu salt, and the requirement for harsh protection-deprotection steps for the synthesis of hydroxylated stilbenes.     

Synthesis and DFT calculations of oxido and phenylimido-rhenium(V) complexes incorporating the N,O donor ligand 2-[(2-hydroxyethylimino)methyl]phenol

The reactions of equimolar amounts of trans-[ReOC1₃(PPh₃)₂] or trans-[Re(NPh)(PPh₃)₂Cl₃] with a Schiff base formed by condensation of 2-hydroxy-4-methoxybenzaldehyde and ethanolamine (H₂L) result in the formation of cis-[ReO(HL)PPh₃Cl₂] (1a) and trans-[Re(NPh)(HL)(PPh₃)Cl₂] (2b), respectively, in good yields. 1a and 2b have been characterized by a range of spectroscopic and analytical techniques. The X-ray crystal structures of 1a and 2b reveal that 1a is an octahedral cis-Cl,Cl oxorhenium(V) complex, while 2b is a trans-Cl,Cl phenylimidorhenium(V) complex. The complexes are weakly emissive at room temperature with quantum yields of 10^?4. Density functional theory calculations of the electronic properties of the complexes were performed and are in agreement with the experimental results. The complexes display quasi-reversible Re(V)/Re(VI) redox couples in acetonitrile. There is reasonable agreement between the experimental and calculated redox potentials of 1a and 2b.     

Kinetic and thermodynamic studies on ligand substitution reactions and base-on/base-off equilibria of cyanoimidazolylcobamide, a vitamin B12 analog with an imidazole axial nucleoside

Ligand substitution reactions of the vitamin B12 analog cyanoimidazolylcobamide, CN(Im)Cbl, with cyanide were studied. Cyanide substitutes imidazole (Im) in the alpha-position more slowly than it substitutes dimethylbenzimidazole in cyanocobalamin (vitamin B12). The kinetics of the displacement of Im by CN- showed saturation behaviour at high cyanide concentration; the limiting rate constant was found to be 0.0264 s(-1) at 25 degrees C and is characterized by the activation parameters: DeltaH(not =) = 111 +/- 2 kJ mol(-1), DeltaS(not =) = +97 +/- 6 J K(-1) mol(-1), and DeltaV(not =) = +9.3 +/- 0.3 cm3 mol(-1). These parameters are interpreted in terms of an I(d) mechanism. The equilibrium constant for the reaction of CN(Im)Cbl with CN- was found to be 861 +/- 75 M(-1), which is significantly less than that obtained for the reaction of cyanocobalamin with CN- (viz. 10(4) M(-1)). pKbase-off for the base-on/base-off equilibrium was determined spectrophotometrically and found to be 0.99 +/- 0.05, which is about 0.9 pH units higher than that obtained previously in the case of cyanocobalamin. In addition, the kinetics of the base-on/base-off reaction was studied using a pH-jump technique and the data obtained revealed evidence for an acid catalyzed reaction path. The results obtained in this study are discussed in reference to those reported previously for cyanocobalamin.     

Increased paraoxon detection by acetylcholinesterase inactivation with ionic liquid additives

This is the first study using ionic liquids (ILs) as additive in the aqueous solvent medium for detection of paraoxon by acetylcholinesterase inhibition method. A systematic comparison of various ILs with organic solvents has been made. The aqueous buffer solution containing ionic liquid ethylpyridinium hexafluorophosphate [EtPy]⁺[PF₆]⁻ has been found to give the best results. The inhibition kinetic follows the first order model. Ionic liquids modified aqueous solutions show the potential to provide a promising and effective medium in detection of paraoxon with acetylcholinesterase.     

The versatility of salicylaldehyde thiosemicarbazone in the determination of copper in blood using adsorptive stripping voltammetry

The adsorptive cathodic stripping voltammetry technique (AdCSV) is used to determine copper(II) using salicylaldehyde thiosemicarbazone (N, S- donor) as a complexing agent on hanging mercury drop electrode at pH 9.3. Variable factors affecting the response, i.e. the concentration of ligand, pH, adsorption potential and adsorption time are assessed and optimized. The adsorbed complex of copper(II) and salicylaldehyde thiosemicarbazone gives a well defined cathodic stripping peak current at −0.35 V, which has been used for the determination of copper in the concentration range of 7.85 × 10⁻⁹ to 8.00 × 10⁻⁶ M with accumulation time of 360 s at −0.1 V versus Ag/AgCl. This technique has been applied for the determination of copper in various digested samples of whole blood at trace levels.     

Copper(II), nickel(II), cobalt(II) and zinc(II) complexes of 2-[2-(6-methylbenzothiazolyl)azo]-5-dimethylaminobenzoic acid: synthesis,spectral, thermal and molecular modelling studies

Complexes of copper(II), nickel(II), cobalt(II), and zinc(II) with 2-[2-(6-methylbenzothiazolyl)azo]-5-dimethylaminobenzoic acid have been prepared and characterized by elemental analysis, vibrational spectra, magnetic susceptibility measurements, conductance measurements and e.p.r. spectra. Stability constants have been evaluated potentiometrically. Electronic spectra, magnetic susceptibility measurements and molecular modeling studies support a distorted square planar geometry around the metal ions. Vibrational spectra indicate the coordination of the azo group, nitrogen of benzothiazole, the carboxylate anion and the acetate ion on complexation with the metal ion. All complexes are found to be monomers. The stability of the complexes follow the order: copper(II) > nickel(II) > cobalt(II) > zinc(II).     

Influence of preferential solvation on the interpolymer complex formation between methacrylic acid–methacrylamide copolymer and poly(vinyl pyrrolidone)

Interpolymer complex formation has been studied between methacrylic acid–methacrylamide copolymer and poly(vinyl pyrrolidone) in acetone–water mixtures of different compositions. At a specific composition of the solvent (e.g., 70% water + 30% acetone by volume), the intrinsic viscosity of the copolymer and the reduced viscosity of 1:1 interpolymer complex had minimum values. Preferential solvation coefficients (λ/C) have been calculated for the various compositions of the solvent mixtures. An excellent coincidence could be obtained between the maximum (λ/C) and the minimum in the viscosity of the polymer solutions. Interpretations have been sought in terms of conformational change of the copolymer at the specific composition of the solvent mixture.     

Synthesis of new fluorinated 4H-1,4-benzothiazines as possible anticancer agents

A single-step synthesis for ring-fluorinated 4H-1,4-benzothiazines is reported by the condensation and oxidative cyclization of β-diketones with 2-amino-5-fluorobenzenethiol. The reaction is believed to proceed via an enaminoketone system.