Manipulating reduction potentials in an artificial safranin cofactor

Safranines hold great promise as artificial flavin-like electron transfer cofactors with tunable properties. We report the design and chemical synthesis of the p-methoxy derivative of safranine O using a new synthetic route based on the Ulmann condensation. Spectroelectrochemical comparison of the purified parent safranine and this derivative demonstrates that the modification increases its two-electron reduction potential by 125 mV, or 5.75 kcal/mol. This modification also causes redshifts in the absorbance and fluorescence spectra of the cofactor, suggesting that it may find future utility in arrayed sensor applications.     

The role of molecular size in the excited state behavior of aminocoumarin dyes in restricted media--2: study of BC I in AOT-formamide reversed micelles

Ground and excited state properties of a pre-twisted 7-diethylaminocoumarin dye (BC I) belonging to the family of coumarinyl benzopyrano pyridines are reported in isooctane-AOT-formamide reversed micelles. In reversed micelles, BC I, albeit soluble in formamide, is found to remain out of the polar solvent pool. But the photophysical properties of the probe dye are sensitive to the changes in the polarity of the interfacial region caused by increase in F0 = [formamide]/[AOT]. The spectroscopic properties and dynamics are indicative of dual emission due to the solubilization of the dye in two different environments (the nonpolar solvent and the interfacial region). Results of the steady-state fluorescence anisotropy experiments also support the presence of two different environments. The present study once again proves that molecular size is an important parameter in the study of the photophysical properties of the flexible aminocoumarin dyes in reversed micelles.     

Cross metathesis with strained exocyclic enones: synthesis of 3-alkylideneoxetan-2-ones from 3-methyleneoxetan-2-ones

[reaction: see text] 3-Alkylideneoxetan-2-ones have been prepared in good to excellent yields with high Z-selectivity by olefin cross metathesis with 3-methyleneoxetan-2-ones in the presence of second generation metathesis catalysts 1 or 2.     

Simultaneous separation and determination of process-related substances and degradation products of venlafaxine by reversed-phase HPLC

A simple and rapid gradient RP HPLC method for simultaneous separation and determination of venlafaxine and its related substances in bulk drugs and pharmaceutical formulations has been developed. As many as four process impurities and one degradation product of venlafaxine have been separated on a Kromasil KR100-5C18 (4.6 mm x 250 mm; particle size 5 microm) column with gradient elution using 0.3% diethylamine buffer (pH 3.0) and ACN/methanol (90:10 v/v) as a mobile phase. The column was maintained at 40 degrees C and the eluents were monitored with photo diode array detection at 225 nm. The chromatographic behaviour of all the compounds was examined under variable compositions of different solvents, temperatures, buffer concentrations and pH. The method was validated in terms of accuracy, precision and linearity as per ICH guidelines. The inter- and intraday assay precision was < 4.02% (%RSD) and the recoveries were in the range of 96.19-101.14% with %RSD < 1.15%. The correlation coefficients (r2) for calibration curves of venlafaxine as well as impurities were in the range of 0.9942-0.9999. The proposed RP-LC method was successfully applied to the analysis of commercial formulations and the recoveries of venlafaxine were in the range of 99.32-100.67 with %RSD <0.58%. The method could be of use not only for rapid and routine evaluation of the quality of venlafaxine in bulk drug manufacturing units but also for the detection of its impurities in pharmaceutical formulations. Forced degradation of venlafaxine was carried out under thermal, photo, acidic, basic and peroxide conditions and the acid degradation products were characterized by ESI-MS/MS, 1H NMR and FT-IR spectral data.     

QCD saturation at the LHC: Comparisons of models to p + p and A + A data and predictions for p + Pb collisions

In a previous paper (arXiv:1011.1895), we showed that saturation models, constrained by e + p HERA data on inclusive and diffractive cross-sections, are in good agreement with p + p data at LHC in the soft sector. Particularly impressive was the agreement of saturation models with the multiplicity distribution as a function of _nch.$n_{\mathrm{ch}.}$. In this Letter, we extend these studies further and consider the agreement of these models with data on bulk distributions in A + A collisions. We compare our results to data on central and forward particle production in d + Au collisions at RHIC and make predictions for inclusive distributions in p + Pb collisions at the LHC.     

Evaluation of air permeability characteristics on the hybridization of carbon black with graphene nanoplatelets in bromobutyl rubber/epoxidized natural rubber composites for inner‐liner applications

Nanotechnology has been explored recently as a means of enhancing the properties of conventional elastomers for engineering applications. In the current study, the effect of nanofillers on air impermeability properties of Brominated isobutylene‐isoprene rubber (BIIR)/Epoxidized natural rubber (ENR) blend has analyzed for automotive applications. The ENR chosen is ENR 25 and ENR 50 (25 and 50% epoxidation) and prepared the blends in a ratio of 75:25 (BIIR:ENR), and from both blend based composites, a part of carbon black replaced with graphene nanoplatelets (GNP). The physical and thermal properties were compared for both binary blend nanocomposites to study the level of exfoliation and reinforcement behavior of GNP. Morphology studies were employed to reveal the level of interaction between GNP and carbon black in both blends. The influence of epoxidation in the formation of nanostructures in both blends have been evaluated, and the effect of nanostructures on air permeability properties was studied. The air impermeability of BIIR‐ENR 50 nanocomposites were improved with increasing platelet concentration, a 30% improvement in air permeability is obtained for BIIR‐ENR 50 composites over BIIR ‐ENR 25.     

Oxidation of lactic acid by water soluble (colloidal) manganese dioxide

Spectrophotometric method has been used to characterize water‐soluble colloidal manganese dioxide obtained by the redox reaction between sodium thiosulphate and potassium permanganate in neutral aqueous medium which shows a single peak in the visible region with λ_max = 425 nm. The kinetics of the oxidation of lactic acid by colloidal manganese dioxide (oxidant) has been investigated spectrophotometrically under pseudo‐first‐order conditions of excess lactic acid. The rate of the noncatalytic reaction pathway was slow which increased with increasing lactic acid concentration. The reaction was first‐order with respect to [oxidant] as well as [lactic acid]. In presence of manganase(II) and fluoride ions, the noncatalytic path disappeared completely while the oxidation rate of autocatalytic path increased and decreased, respectively with increasing [Mn(II)] and [F^?]. A mechanistic scheme in conformity with the observed kinetics has been proposed with the rate‐law: © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 359–366 2004     

Photo-Fenton and photo-Fenton-like processes for the degradation of methyl orange in aqueous medium: Influence of oxidation states of iron

Degradation of methyl orange (MO) was carried out by the photo-Fenton process (Fe²⁺/H₂O₂/UV) and photo-Fenton-like processes (Fe³⁺/H₂O₂/UV, Fe²⁺/S₂O₈²⁻/UV, and Fe³⁺/S₂O₈²⁻/UV) at the acidic pH of 3 using hydrogen peroxide and ammonium persulfate (APS) as oxidants. Oxidation state of iron had a significant influence on the efficiency of photo-Fenton/photo-Fenton-like processes. It was found that a process with a source of Fe³⁺ ions as the catalyst showed higher efficiency compared to a process with the Fe²⁺ ion as the catalyst. H₂O₂ served as a better oxidant for both oxidation states of iron compared to APS. The lower efficiency of APS is attributed to the generation of excess protons which scavenges the hydroxyl radicals necessary for degradation. Further, the sulfate ions produced from S₂O₈²⁻ form a complex with Fe²⁺/Fe³⁺ ions thereby reducing the concentration of free iron ions in the solution. This process can also reduce the concentration of hydroxyl radicals in the solution. Efficiency of the various MO degradation processes follows the order: Fe³⁺/H₂O₂/UV, Fe³⁺/APS/UV, Fe²⁺/H₂O₂/UV, Fe²⁺/APS/UV.     

CoⅡ，NiⅡ和CuⅡ与L-组氨酸和L-谷氨酸在1，4二氧六环-水混合物中混合配体配合物的生成平衡

在303.0 K维持离子强度为0.16 mol.L-1,体积比为0.0～60.0%的1,4二氧六环-水混合体系中用pH滴定法研究了CoⅡ,NiⅡ和CuⅢ离子与L-组氨酸和L-谷氨酸混合配体配合物的生成平衡。对不同的金属(M)与L-组氨酸(L)、L-谷氨酸(X)比(cM∶cL∶cX=1∶2.5∶2.5,1∶2.5∶5.0,1∶5.0∶2.5)的体系进行了碱量滴定。计算了三元配合物的稳定常数并用MINIQUAD75对各种模型进行了优化。根据统计数据和残差分析结果选取了最合适的化学模型。检测到的物种:对CoII而言为MLX2H2-和MLX23-,对NiⅡ和CuⅡ而言为MLXH,MLX2H2-和MLX23-。就有关浓度和稳定性对三元物种与二元物种进行了比较。三元物种的额外稳定性可归因于电荷中和,鳌合效应,堆叠作用和氢键等。