Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Micro-Raman investigations of myelins in aerosol-OT/water system

Surfactant outgrowth during dissolution as myelin figures, which happens on contact with water, is of prime importance in emulsification and detergency. Micro-Raman investigation of different lyotropic phases formed during dissolution of aerosol-OT (bis 2-ethylhexyl sulfosuccinate) in water during myelin formation reveals the flexible arrangement of the surfactant bilayers in myelin. The conformation around CC-CS bond and the hydrocarbon chains of aerosol-OT in the different liquid crystalline phases were identified from the fingerprints of CC-CS stretching, C-C stretching, C-H bending, and stretching frequencies. Existence of mixture of trans and gauche conformations around CC-CS bond and that of the hydrocarbon chains in myelin supports the fluid nature of bilayers by which it is made. Similar conformations of hydrocarbon chains in lamellar phase and in myelin support the concept of myelins being rolled up lamella. The observations are in line with the disorderness of the hydrocarbon chains in the bilayers of phospholipids that has been reported earlier. From the C-C stretching frequencies at the root of myelins, the kinked structure of the hydrocarbon chain is identified, and loose packing of molecules which would facilitate water transport across membranes is evident.     

Derivation of class II force fields. VIII. Derivation of a general quantum mechanical force field for organic compounds

A class II valence force field covering a broad range of organic molecules has been derived employing ab initio quantum mechanical "observables." The procedure includes selecting representative molecules and molecular structures, and systematically sampling their energy surfaces as described by energies and energy first and second derivatives with respect to molecular deformations. In this article the procedure for fitting the force field parameters to these energies and energy derivatives is briefly reviewed. The application of the methodology to the derivation of a class II quantum mechanical force field (QMFF) for 32 organic functional groups is then described. A training set of 400 molecules spanning the 32 functional groups was used to parameterize the force field. The molecular families comprising the functional groups and, within each family, the torsional angles used to sample different conformers, are described. The number of stationary points (equilibria and transition states) for these molecules is given for each functional group. This set contains 1324 stationary structures, with 718 minimum energy structures and 606 transition states. The quality of the fit to the quantum data is gauged based on the deviations between the ab initio and force field energies and energy derivatives. The accuracy with which the QMFF reproduces the ab initio molecular bond lengths, bond angles, torsional angles, vibrational frequencies, and conformational energies is then given for each functional group. Consistently good accuracy is found for these computed properties for the various types of molecules. This demonstrates that the methodology is broadly applicable for the derivation of force field parameters across widely differing types of molecular structures. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1782-1800, 2001     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

Effects of molecular siting and adsorbent heterogeneity on the ideality of adsorption equilibria

The ideal adsorbed solution (IAS) theory is the benchmark for the prediction of mixed-gas adsorption equilibria from pure-component isotherms. In this work, we use atomistic grand canonical Monte Carlo simulations to test the effects of molecular siting and adsorbent energetic heterogeneity on the applicability of the IAS theory. Pure-component isotherms generated by atomistic simulation are used to predict binary isobaric isotherms using the IAS theory. These predicted isotherms are compared with those obtained by a full atomistic simulation of the binary mixture. Binary mixtures of argon, methane, and CF4 in silicalite are found to obey IAS theory, while benzene/methane and cyclohexane/methane in silicalite are nonideal. The mixture of argon and CF4 is ideal despite the large difference in the sizes of the two species. This contradicts previous hypotheses in the literature, which state that mixtures of species of unequal size do not adsorb ideally. The nonideal behavior of the benzene/methane and cyclohexane/methane systems occurs because of adsorbent heterogeneity in these systems, which depends on both sorbent and sorbate. In addition, we use a lattice gas model with parameters derived from atomistic simulation to demonstrate analytically that a sufficiently energetically heterogeneous adsorbent will result in the breakdown of IAS theory even in the absence of interactions between sorbates.     

On the temperature Dependence of the orientational Order Parameter in the Nematic Phase of Cyanophenyl Behzoates

The orientational order parameters fot two liquid crystal materials, 4-cyanophenyl 4-butylbenzoate and 4-cyanophenyl 4-pentylbenzoate, have been derived by measuring the change in the refractive index as function of temperature. The order parameters are compared with MaierSaupe theory, and the sharpness of the transitions has been shown using the Haller's plot.     

Ensuring robustness in the quality of antibiotic susceptibility test discs for four novel antibiotics

Antibiotic susceptibility test (AST) discs are used as an in-vitro diagnostic tool to select the appropriate antibiotic to treat an infection. Generally, the concentration of the drug loaded on to the AST discs is measured by studying its activity against quality control organisms. This methodology has several limitations—it is time consuming, requires trained manpower, has a wider acceptance criteria of zone of inhibitions—causing ambiguity in judging smaller variations in drug concentration. To overcome these issues, we have developed and validated high-performance liquid chromatographic (HPLC) methods for the determination of strength of AST discs for in-house researched antibiotics, namely Levonadifloxacin/WCK 771, Nafithromycin/WCK 4873, Cefepime-Tazobactam/WCK 4282, and Cefepime-Zidebactam/WCK 5222. The drugs were extracted from the AST discs using an appropriate solvent. The developed methods are simple, accurate, precise, reproducible, rugged, and robust. They are efficient in terms of time, and can be easily conducted in a quality control laboratory during release as well as stability evaluation of AST disc. Application of HPLC methods for the determination of strength of AST discs ensures flawless quality and, consequently, a better selection of drugs to treat bacterial infections in clinics.     

Investigation on Impurity Profiling and Degradation Behavior of WCK 771

Chromatographia - WCK 771 is a novel antibacterial drug recently launched in India for the treatment of acute bacterial skin and skin structure infections (ABSSSI). This report describes...