Accurate,sensitive determination of omega-6 and omega-3 polyunsaturated fatty acids in human plasma,urine samples

Quantitative determination of omega-6 and omega-3 polyunsaturated fatty acids in human plasma and urine with high accuracy and precision provides significant information to monitor the underlying etiology of several diseases. In this regard, liquid chromatography-mass spectrometry is a good choice owing to its great selectivity and sensitivity. Additionally, the hybrid quadrupole–time of flight–mass spectrometer systems provides easy identification of target compounds with superior mass measurements. In this study, an analytical method has been developed for simple, accurate and simultaneous determination of linoleic acid, arachidonic acid, docosahexaenoic acid and eicosapentaenoic acid in a short chromatographic analysis period. The developed method is suitable for the quantitative detection of these four compounds with detection limits ranging between 1.1–3.0 ng ml⁻¹ and its applicability was assessed in human urine and plasma samples. As a result, acceptable accuracy (between 83 and 111%) and good precision (<6%) were obtained for target compounds using matrix matching calibration strategy.     

Biological assays and theoretical density functional theory calculations of Rh(I), Ir(III), and Ru(II) complexes of chiral phosphinite ligand

Four metal complexes, IL-OPPh₂-Ru-p-cymene (3) , IL-OPPh₂-Ru-benzene (4) , IL-OPPh₂-Ir-Cp* (5) , IL-OPPh₂-Rh-COD (6) , have been evaluated for in vitro antioxidant activity such as 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging and reducing power activity. Maximum scavenging activity (71.43%) was obtained with IL-OPPh₂-Ru-p-cymene, whereas IL-OPPh₂-Rh-COD showed the highest reducing power ability. The complexes were also studied for their antimicrobial activity against three Gram-positive and three Gram-negative bacteria. In addition, DNA binding of the complexes was evaluated using calf thymus DNA. Both Ru(II) complexes exhibited good DNA-binding activity while the other complexes did not have any activity. Furthermore, ab initio quantum calculations of four complexes were also carried out using density functional theory to better understand their chemical behaviors.     

Thermal analysis: an effective characterization method of polyvinyl acetate films applied in corrosion inhibition field

Journal of Thermal Analysis and Calorimetry - To prepare a commercial product with economic and technical relevance, polyvinyl acetate (PVAc) was synthesized, under our laboratory conditions,...     

A Close Look at the Molecular Structure,Prototropic Behavior and Supramolecular Architecture of (E)-4-Bromo-2-[(phenylimino)methyl]-5-methoxyphenol by Spectroscopic,Crystallographic, and Computational Methods

Crystallography Reports - In this study, the molecular structure, prototropic behavior and supramolecular architecture of a new Schiff base have been studied in depth using spectroscopic (UV-vis),...     

SPE and determination by FAAS of heavy metals using a new synthesized polymer resin in various water and dried vegetables samples

Firstly, poly[phenyl thiadiazole methacrylamide-co-divinylbenzene-co-2-acrylamido-2-methylpropane sulfonic acid] (PTMAAm-co-DVB-co-AMPS), a new polymer resin was synthesized. This polymer resin was characterized by elemental analyzer, X-ray diffractometer, scanning electron microscope (SEM) and IR spectrometer. The glass column packed with the synthesized polymer resin was used for solid phase extraction (SPE). At the same time, the analytes were separated and preconcentrated from various water, dried vegetables samples and standard reference material (CRM) with SPE and determined by flame atomic absorption spectrometer (FAAS). The experimental conditions of this method such as pH, flow rates of sample, flow rates of eluent, type / concentration / volume of eluent, sample volume and matrix ions were examined. The limits of detection (µg L^?1) were calculated (3s) 0.9 for Mn(II), 1.4 for Cd(II), Co(II) and Zn(II), 1.5 for Cr(III), 2.2. for Cu(II), 1.9 for Pb(II),1.5 for Ni(II) and 1.9 for Fe(III) (n = 21). The low relative standard deviation, ≤ 2% (n = 11) and preconcentration factor as 75 for analytes were obtained.     

Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.

     

On converse H-theorem

In the present paper the so-called weighting process is defined. Conditions on the weights implying the converse H-theorem are given. These conditions are satisfied by the iterated weighting process which contains, as a particular case, the Bayesian model for prediction and retrodiction given by S. Watanabe.     

Dynamic pricing and scheduling in a multi-class single-server queueing system

This paper investigates an optimal sequencing and dynamic pricing problem for a two-class queueing system. Using a Markov Decision Process based model, we obtain structural characterizations of optimal policies. In particular, it is shown that the optimal pricing policy depends on the entire queue length vector but some monotonicity results prevail as the composition of this vector changes. A numerical study finds that static pricing policies may have significant suboptimality but simple dynamic pricing policies perform well in most situations.     

Further Results for kth order Kantorovich Modification of Linking Baskakov Type Operators

In this paper we consider a non-trivial link between Baskakov type operators and their genuine Durrmeyer type modification as well as the kth order Kantorovich variant. Recursion formulas for the moments and the images of monomials are proved in order to derive asymptotic expansions. Furthermore we investigate convexity properties of the linking operators and the limiting behavior for certain function spaces.     

Well-posedness for a phase-field transition system endowed with a polynomial nonlinearity and a general class of nonlinear dynamic boundary conditions

This work is devoted to the study of a phase-field transition system of Caginalp type endowed with a general polynomial nonlinearity and a general class of nonlinear and nonhomogeneous dynamic boundary conditions (in both unknown functions). The existence, uniqueness and regularity of solutions are established. Here we extend several results proved by some authors, including the already studied boundary conditions, which makes the present mathematical model capable of revealing the complexity of a wide class of physical phenomena (for instance, phase change in Ω at the boundary of Ω).