Catalysis by Amberlite IR-120 resin: a rapid and green method for the synthesis of phenols from arylboronic acids under metal, ligand, and base-free conditions

A clean process has been developed for the ipso-hydroxylation of aryl and heteroaryl boronic acids to the corresponding phenols using commercially available and recyclable Amberlite IR-120 resin and aqueous hydrogen peroxide as an oxidizing agent. The ion-exchange sulfonic acid resin catalyst could be readily recycled by filtration and directly reused at least four times without any significant loss of activity.     

Size-dependent coalescence kernel in fertilizer granulation-A comparative study

Granulation is a key process in several industries like pharmaceutical, food, fertilizer, agrochemicals, etc. Population balance modeling has been used extensively for modeling agglomeration in many systems such as crystallization, aerosols, pelletisation, etc. The key parameter is the coalescence kernel, β（ij） which dictates the overall rate of coalescence as well as the effect of granule size on coalescence rate. Adetayo, Litster, Pratsinis, and Ennis （1995） studied fertilizer granulation with a broad size distribution and modeled it with a two-stage kernel. A constant kernel can be applied to those granules which coalesce successfully. The coalescence model gives conditions for two types of coalescence, Type I and II. A twostage kernel, which is necessary to model granule size distribution over a wide size distribution, is applied in the present fluidized bed spray granulation process. The first stage is size-independent and non-inertial regime, and is followed by a size-dependent stage in which collisions between particles are non-random, i.e. inertial regime. The present work is focused on the second stage kernel where the feed particles of volume i and j collide and form final granule ij instead of i ＋j （Adetayo et al., 1995） which gives a wider particle size distribution of granules than proposed earlier.     

Mixed-mode interfacial adhesive strength of a thin film on an anisotropic substrate

The mixed-mode interfacial adhesion strength between a gold (Au) thin film and an anisotropic passivated silicon (Si) substrate is measured using laser-induced stress wave loading. Test specimens are prepared by bonding a fused silica (FS) prism to the back side of a 〈1 0 0〉 Si substrate with a thin silicon nitride (Si_xN_y) passivation layer deposited on the top surface. A high-amplitude stress wave is developed by pulsed laser ablation of a sacrificial absorbing layer on one of the lateral surfaces of the FS prism. Due to the negative non-linear elastic properties of the FS, the compressive stress wave evolves into a decompression shock with fast fall time. Careful selection of the incident angle between the pulse and the FS/Si interface generates a mode-converted shear wave in refraction, subjecting the Si_xN_y/Au thin film interface to dynamic mixed-mode loading, sufficient to cause interfacial fracture. A detailed analysis of the anisotropic wave propagation combined with interferometric measurements of surface displacements enables calculation of the interfacial stresses developed under mixed-mode loading. The mixed-mode interfacial strength is compared to the interfacial strength measured under purely tensile loading.     

Wavelet filtering applied to time-average digital speckle pattern interferometry fringes

In this paper we are presenting a filtering scheme using Symlet wavelet to remove the speckle noise from the time-averaged digital speckle pattern interferometry fringes. To demonstrate the potential of Symlet wavelet filtering, experiments are conducted to remove the speckle noise from the fringes recorded for the surface of computer hard disk. Experimental results demonstrate that this filtering removes the speckle noise to the large extent.     

Tandem RAFT Polymerization and Click Chemistry: An Efficient Approach to Surface Modification

PS grafted silica nanoparticles have been prepared by a tandem process that simultaneously employs RAFT polymerization and click chemistry. In a single pot procedure, azide‐modified silica, an alkyne functionalized RAFT agent and styrene are combined to produce the desired product. As deduced by thermal gravimetric and elemental analysis, the grafting density of PS on the silica in the tandem process is intermediate between analogous “grafting to” and “grafting from” techniques for preparing PS brushes on silica. Relative rates of RAFT polymerization and click reaction can be altered to control grafting density.

     

Anthrone-spirolactam and quinoline hybrid based sensor for selective fluorescent detection of Fe3+ ions

The synthesis of a novel, and highly selective Fe³⁺ ion sensor based on anthrone-spirolactam and its quinoline hybrid ligand is reported. The designed ligand displayed selective detection of Fe³⁺ ions with enhanced fluorescence emission. The complexation of Fe³⁺ ion led to a red shift of 32 nm from 420 nm to 452 nm, and a several fold increase in intensity with fluorescent green emission. The complexation (detection) of Fe³⁺ ions with ligand resulted in chelation enhanced fluorescence and intramolecular charge transfer through the inhibition of C=N isomerization. This hybrid sensor shows high sensitivity and selectivity, spontaneous response, and works on a wide pH range a minimum detection limit of 6.83 × 10⁻⁸ M. Importantly, the sensor works through the fluorescence turn-on mechanism that overcomes the paramagnetic effect of Fe³⁺ ions. The binding mechanism between the ligand and the Fe³⁺ ions was established from the Job's plot method, optical studies, Fourier transfor infrared spectroscopy, NMR titration, fluorescence life-time studies, and density functional theory optimization. The sensor displayed excellent results in the quantification of Fe³⁺ ions from real water samples. Furthermore, due to its biocompatibility nature, fluorescent spotting of Fe³⁺ ions in live cells revealed its bioimaging applications.     

Influence of 120 MeV S9+ ion irradiation on structural,optical and morphological properties of zirconium oxide thin films deposited by RF sputtering

The calibrated and controlled swift heavy ions (SHI) beam irradiation generate defects which can cause modifications in various properties of the materials such as structural, optical, magnetic, morphological, and chemical etc. The passage of ion through the target material causes the nuclear energy losses ($S_n$) and electronic energy losses ($S_e$). The $S_e$ dominates over $S_n$ in SHI irradiation. In the present study, ZrO₂ thin films were grown on silicon and glass substrate by using RF sputtering deposition technique. For the purpose of modifications induced by swift heavy ions, these films were irradiated by a 120 MeV S⁹⁺ ion beam of 1 pnA current, with varying ion fluences from 5E12 to 1E13 ions/cm², using the tandem accelerator at the Inter University Accelerator Center (IUAC), New Delhi, India. The X-ray diffraction (XRD) patterns confirmed the formation of monoclinic and tetragonal phases and it was observed that XRD peaks intensity increased up to the fluence of 5E12 ions/cm² followed by opposite behavior at higher fluences. Atomic force microscope (AFM) study revealed the increased surface roughness after SHI irradiation. In addition to it, the formation of electronic transition states in optical band gap region and enhancement of absorption edge was observed from UV-visible spectroscopy (UV-Vis) results due to which direct band gap energy value decreased from those of un-irradiated samples. Photoluminescence (PL) broad emission spectra were determined using the excitation wavelength at 290 nm with the prominent peak at 415 nm which can be ascribed to Zr vacancies due to band edge emission as a result of free-exciton recombination. Rutherford backscattering spectrometry (RBS) technique was used for depth profiling and elemental composition in zirconia thin films. The expected role of electronic energy loss during ion irradiation is to modify the properties of the material has been discussed.     

Harmonics of Daily Variations in Cosmic-Ray Intensity

The high/low amplitude anisotropic wave-train events (HAE/LAE) in cosmic-ray intensity have been investigated during the period 1991-94, using the neutron monitor data for different latitudes. In all, 16 HAE and 13 LAE cases have been studied. An inter-comparison of the first three harmonics during these events has been made so as to understand the basic reason causing the occurrence of these types of events. It has been observed that the phase of diurnal anisotropy shifts towards earlier hours for HAEs; similarly, it shifts towards earlier hour as compared to 18-Hr direction for LAEs. For semi-diurnal anisotropy phase remains statistically the same for both HAE as well as for LAE. Further in case of tri-diurnal anisotropy phase is evenly distributed for both types of events. The interplanetary magnetic field and solar-wind plasma parameters during these events are also investigated. It has been also observed that HAE/LAEs are weakly dependent on solar-wind velocity.