Enantioselective LC–ESI–MS/MS method for quantitation of (−)-lumefantrine and (+)-lumefantrine in mice plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective, and reliable LC–MS/MS–ESI method for the direct quantitation of lumefantrine (LFN) enantiomers [(−)-LFN and (+)-LFN] in mice plasma as per regulatory guideline. LFN enantiomers and carbamazepine (internal standard) were extracted from mice plasma using Strata X SPE (solid-phase extraction) cartridges. Good resolution between enantiomers was achieved on a Chiralpak IA-3 column using an isocratic mobile phase (0.1% of diethyl amine in methanol), which was delivered at a flow rate of 0.8 mL/min. Detection and quantitation were performed using multiple reaction monitoring mode following the transitions m/z 530.27 → 512.30 and 237.00 → 194.00 for LFN enantiomers and the internal standard, respectively, in the positive-ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 2.39–895 ng/mL for each enantiomer. The intra- and inter-day precisions were in the range of 1.03–6.14 and 6.36–8.70 and 2.03–4.88 and 5.82–11.5 for (−)-LFN and (+)-LFN, respectively. Both (−)-LFN and (+)-LFN were found to be stable under different stability conditions. The method was successfully used to delineate stereoselective pharmacokinetics of LFN enantiomers in mice after an oral administration of rac-LFN (20 mg/kg). The pharmacokinetic results indicated that the disposition of LFN enantiomers was stereoselective in mice.     

Simultaneous determination of novel β-lactamase inhibitor WCK 4234 and Meropenem in dog plasma by LC–MS/MS and its application to preclinical pharmacokinetic study

A precise and accurate liquid chromatography–tandem mass spectrometric (LC–MS/MS) bioanalytical method has been developed and validated for the simultaneous quantification of WCK 4234 and meropenem (MEM) in dog plasma. Protein precipitation using acetonitrile was employed as a sample preparation approach. Cefepime was used as an internal standard. The developed method was selective, sensitive (limit of quantification, 0.075 μg/ml for both drugs), accurate (recovery > 90%), precise (CV < 10%) and linear (r² ≥ 0.99, concentration range 0.075–120 μg/ml for both analytes). The developed method was successfully applied for the determination of both drugs in plasma to assess the pharmacokinetics in beagle dogs. WCK 4234 + MEM in a 1:1 ratio at 15 + 15 and 30 + 30 mg/kg doses were administered by the intravenous route. The mean plasma concentration and area under the concentration–time curve of WCK 4234 ranged from 38.3 to 77.4 μg/ml and from 47.8 to 77.1 μg h/ml, respectively, and the values for MEM ranged from 52.2 to 115.3 μg/ml and 70.5 to 133.6 μg h/ml respectively. The elimination half-life of WCK 4234 and MEM was around 0.8 h.     

Influence of small DC bias field on the electrical behaviour of Sr- and Mg-doped lanthanum gallate

One of the promising electrolyte materials for solid oxide fuel cells application, Sr- and Mg-doped lanthanum gallate La_0.9Sr_0.1Ga_0.8Mg_0.2O_3-δ (LSGM), is synthesized by conventional solid state ceramic route. X-ray Rietveld analysis confirms the formation of main orthorhombic phase at room temperature along with a few minor secondary phases. SEM micrograph reveals the grain and grainboundary morphology of the system. Electrical conductivity of the LSGM sample is measured in the temperature range 573–873 K and in the frequency range 20 Hz–1 MHz at a few small DC bias fields (at 0.0, 0.5, 1.0, 1.5 and 2.0 V). The conductivity spectra show power-law behaviour. Electrical conductivity of the sample is found to be weakly dependent on DC bias field. This is attributed to field-dependent bulk and grainboundary conduction processes. In the present system, under investigated bias field range, the possibility of formation of Schottky barrier is ruled out. The concept of grainboundary channel (pathway) modulation on the application of bias field is proposed.     

Efficient design of perovskite solar cell using mixed halide and copper oxide

Solar cells based on perovskites have emerged as a transpiring technology in the field of photovoltaic. These cells exhibit high power conversion efficiency. The perovskite material is observed to have good absorption in the entire visible spectrum which can be well illustrated by the quantum efficiency curve. In this paper, theoretical analysis has been done through device simulation for designing solar cell based on mixed halide perovskite. Various parameters have efficacy on the solar cell efficiency such as defect density, layer thickness, doping concentration, band offsets, etc. The use of copper oxide as the hole transport material has been analyzed. The analysis divulges that due to its mobility of charge carriers, it can be used as an alternative to spiro-OMeTAD. With the help of simulations, reasonable materials have been employed for the optimal design of solar cell based on perovskite material. With the integration of copper oxide into the solar cell structure, the results obtained are competent enough. The simulations have shown that with the use of copper oxide as hole transport material with mixed halide perovskite as absorber, the power conversion efficiency has improved by 6%.The open circuit voltage has shown an increase of 0.09 V, short circuit current density has increased by 2.32 m A/cm~2, and improvement in fill factor is 8.75%.     

Design and Development of Nano-Resolution Wireless Czochralski System for High Quality Crystal Growth Applications

Crystallography Reports - Remotely operated Czochralski puller, Automatic Crystal Puller System (ACPS) with a translation nano-resolution of 20 nm, is designed and developed for high quality...     

Anion‐Mediated Effects on the Size and Mechanical Properties of Enzymatically Crosslinked Suckerin Hydrogels

The suckerin family of proteins, identified from the squid sucker ring teeth assembly, offers unique mechanical properties and potential advantages over other natural biomaterials. In this study, a small suckerin isoform, suckerin‐12, is used to create enzymatically crosslinked, macro‐scale hydrogels. Upon exposure to specific salt conditions, suckerin‐12 hydrogels contracted into a condensed state where mechanical properties are found to be modulated by the salt anion present. The rate of contraction is found to correlate well with the kosmotropic arm of the Hofmeister anion series. However, the observed changes in hydrogel mechanical properties are better explained by the ability of the salt to neutralize charges in suckerin‐12 by deprotonization or charge screening. Thus, by altering the anions in the condensing salt solution, it is possible to tune the mechanical properties of suckerin‐12 hydrogels. The potential for suckerins to add new properties to materials based on naturally‐derived proteins is highlighted.     

Experimental analysis of tamarind seed powder-based flash powder composition for eco-friendly firecrackers

Journal of Thermal Analysis and Calorimetry - In this work, considering the various practical concerns during storage, processing, handling and emission of flash powder used for making firecracker,...     

Optimal extraction,sequential fractionation and structural characterization of soda lignin

Research on Chemical Intermediates - In this research, soda lignin was extracted from Bambusa bambos using a soda pulping process, and interaction effects of pulping variables were statistically...