Radiation crosslinked Polyolefinic blends: exploring thermally tuned dual Shape Memory character

Shape memory behavior of thermally triggered polymeric materials based on ethylene octene copolymer (EOC) and ethylene propylene diene rubber (EPDM) has been studied in details. Investigation of the shape memory behavior of uncrosslinked EOC–EPDM and electron beam crosslinked EOC–EPDM blends have been pursued thoroughly. Shape memory study has been carried out at 60°C, which shows that with the effect of electron beam radiation shape fixity behavior of the crosslinked blends becomes poor as compared with its uncrosslinked blend system whereas the improvement in shape recovery behavior takes place after the exposure to electron beam radiation. Morphology study by Atomic Force Microscopy (AFM) and crystallinity study by X‐ray diffraction analysis also give the clear idea regarding the formation of crosslinked network structure. Improvement in gel content with increasing radiation dose supports the formation of network structure. Even after the crosslinking in presence of electron beam radiation also, it has been found that crosslinked EPDM rich blends is superior in terms of shape memory behavior point of view. Lower decay of stress value coupled with lower relaxation ratio of crosslinked EPDM rich blend support its superior shape memory behavior. Copyright © 2016 John Wiley & Sons, Ltd.     

Deoxycholate induced tetramer of αA-crystallin and sites of phosphorylation: fluorescence correlation spectroscopy and femtosecond solvation dynamics

Structure and dynamics of acrylodan labeled αA-crystallin tetramer formed in the presence of a bile salt (sodium deoxycholate, NaDC) has been studied using fluorescence correlation spectroscopy (FCS) and femtosecond up-conversion techniques. Using FCS it is shown that, the diffusion constant (D(t)) of the αA-crystallin oligomer (mass ~800 kDa) increases from ~35 μm(2) s(-1) to ~68 μm(2) s(-1). This corresponds to a decrease in hydrodynamic radius (r(h)) from ~6.9 nm to ~3.3 nm. This corresponds to about 10-fold decrease in molecular mass to ~80 kDa and suggests formation of a tetramer (since mass of αA-crystallin monomer is ~20 kDa). The steady state emission maximum and average solvation time (<τ(s)>) of acrylodan labeled at cysteine 131 position of αA-crystallin is markedly affected on addition of NaDC, while the tryptophan (trp-9) becomes more exposed. This suggests that NaDC binds near the cys-131 and makes the terminal region of αA-crystallin exposed. This may explain the enhanced auto-phosphorylation activity of αA-crystallin near the terminus of the 173 amino acid protein (e.g., at the threonine 13, serine 45, or serine 169 and 172) and suggests that phosphorylation at ser-122 (close to cys-131) is relatively less important.     

Selective Production of Secondary Amine by the Photocatalytic Cascade Reaction Between Nitrobenzene and Benzyl Alcohol over Nanostructured Bi2MoO6 and Pd Nanoparticles Decorated with Bi2MoO6

The synthesis of secondary amine by the photoalkylation of nitrobenzene with benzyl alcohol using a simple light source and sunlight is a challenging task. Herein, a one-pot cascade protocol is employed to synthesize secondary amine by the reaction between nitrobenzene and benzyl alcohol. The one-pot cascade protocol involves four reactions: (a) photocatalytic reduction of nitrobenzene to aniline, (b) photocatalytic oxidation of benzyl alcohol to benzaldehyde, (c) reaction between aniline and benzaldehyde to form imine, and (d) photocatalytic reduction of imine to a secondary amine. The cascade protocol to synthesize secondary amine is accomplished using Bi₂MoO₆ and Pd nanoparticles decorated Bi₂MoO₆ catalysts. The surface characteristics, oxidation states, and elemental compositions of the materials are characterized by several physicochemical characterization techniques. Optoelectronic and photoelectrochemical measurements are carried out to determine the bandgap, band edge potentials, photocurrents, charge carrier's separation, etc. An excellent yield of secondary amine is achieved with simple household white LED bulbs. The catalyst also exhibits similar or even better activity in sunlight. The structure-activity relationship is established using catalytic activity data, control reactions, physicochemical, optoelectronic characteristics, and scavenging studies. Bi₂MoO₆ and Pd nanoparticles decorated Bi₂MoO₆ exhibit excellent photostability and recyclability. The simple catalyst design with a sustainable and economical light source for the synthesis of useful secondary amine from the nitrobenzene and benzyl alcohol would attract the researchers to develop similar catalytic protocols for other industrially important chemicals.     

An approximate shape-independent relation at Feshbach resonance

The product of the strength and the square of the range of a potential has a characteristic shape-dependent value to support only one bound state at zero energy. This variation is tracked in terms of a shape factor, and a relation is derived that is approximately shape-independent.     

The role of thiophosphoryl disulfide on the co‐cure of CR‐EPDM blends: effect of white fillers

Bis(diisopropyl) thiophosphoryl disulfide (DIPDIS) being a rubber accelerator has a definite role as a coupling agent in the silica filled polychloroprene rubber with ethylene propylene diene rubber (CR‐EPDM) blends. Diethylene glycol can further improve the beneficial effect of DIPDIS in silica filled CR‐EPDM blends. Two‐stage vulcanization technique further improves the physical properties of silica filled CR‐EPDM blends. The results have been compared with non‐reinforcing calcium carbonate filled systems. Scanning electron microscopy (SEM) studies further indicate the coherency and homogeneity in the silica filled CR‐EPDM blend vulcanizates obtained from this two‐stage process. Copyright © 2004 John Wiley & Sons, Ltd.     

Preparation and characterization of Cu(II)-N-salicylideneanthranilic acids,their reduction products and hydrolysis of the Schiff base

Copper (II) complexes ofN-salicylideneanthranilic acid (I) and its derivatives (II, III) as well as their NaBH₄ reduction products, namelyN-(2-hydroxybenzyl) anthranilic acids (IV–VI) have been prepared and their structures have been determined analytically. Tetracoordinated planar structures of the Cu(II) complexes of the Schiff bases and distorted tetrahedral structures of the Cu(II) complexes of compoundsV–VI have been elucidated by ESR and other spectral methods. During the preparation of the complex the hydrolysis of the Schiff base often takes place in the presence of water giving anthranilates and salicylaldehydates of metals to some extent along with the complexes of the Schiff base. The kinetic data for the hydrolysis ofN-salicylideneanthranilic acid (I) in methanol-water solution also are reported.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.     

Stokes phenomena and monodromy deformation problem for nonlinear Schrödinger equation

Following Flaschka and Newell, the inverse problem for Painleve IV is formulated with the help of similarity variables. The Painleve IV arises as the eliminant of the two second-order ordinary differential equations originating from the nonlinear Schrödinger equation. Asymptotic expansions are obtained near the singularities at zero and infinity of the complex eigenvalue plane. The corresponding analysis then displays the Stokes phenomena. The monodromy matrices connecting the solutionY _j , in the sectorS _j to that inS _j +1 are fixed in structure by the imposition of certain conditions. It is then shown that a deformation keeping the monodromy data fixed leads to the nonlinear Schrödinger equation. While Flaschka and Newell did not make any absolute determination of the Stokes parameters, the present approach yields the values of the Stokes parameters in an explicit way, which in turn can determine the matrix connecting the solutions near zero and infinity. Finally, it is shown that the integral equation originating from the analyticity and asymptotic nature of the problem leads to the similarity solution previously determined by Boiti and Pampinelli.     

Structure of (5'S)-8,5'-cyclo-2'-deoxyguanosine in DNA

Diastereomeric 8,5'-cyclopurine 2'-deoxynucleosides, containing a covalent bond between the deoxyribose and the purine base, represent an important class of DNA damage induced by ionizing radiation. The 8,5'-cyclo-2'-deoxyguanosine lesion (cdG) has been recently reported to be a strong block of replication and highly mutagenic in Escherichia coli. The 8,5'-cyclopurine-2'-deoxyriboses are suspected to play a role in the etiology of neurodegeneration in xeroderma pigmentosum patients. These lesions cannot be repaired by base excision repair, but they are substrates for nucleotide excision repair. The structure of an oligodeoxynucleotide duplex containing a site-specific S-cdG lesion placed opposite dC in the complementary strand was obtained by molecular dynamics calculations restrained by distance and dihedral angle restraints obtained from NMR spectroscopy. The S-cdG deoxyribose exhibited the O4'-exo (west) pseudorotation. Significant perturbations were observed for the β, γ, and χ torsion angles of the S-cdG nucleoside. Watson-Crick base pairing was conserved at the S-cdG·dC pair. However, the O4'-exo pseudorotation of the S-cdG deoxyribose perturbed the helical twist and base pair stacking at the lesion site and the 5'-neighbor dC·dG base pair. Thermodynamic destabilization of the duplex measured by UV melting experiments correlated with base stacking and structural perturbations involving the modified S-cdG·dC and 3'- neighbor dT·dA base pairs. These perturbations may be responsible for both the genotoxicity of this lesion and its ability to be recognized by nucleotide excision repair.     

Basic Alumina‐Supported Synthesis of Aryl‐Heteroarylmethanes via Palladium Catalyzed Cross‐Coupling under Microwave Irradiation

A basic alumina‐supported microwave assisted simple methodology has been developed for the synthesis of aryl‐heteroaryl methanes (benzylated quinolones) via transition metal catalyzed cross‐coupling reaction of halo substituted polynuclear oxa‐aza quinolones with benzyl indium, an organometallic reagent easily derived from commercially available benzyl bromide.