An Experimental Investigation into the Acoustic Characteristics of Fluid-filled Porous Structures—A Simplified Model of the Human Skull Cancellous Structure

In nature, shape and structure evolve from the struggle for better performance. Often, biological structures combine multiple beneficial properties, making research into mimicking them very complex. Presented here is a summary of observations from a series of experiments performed on a material that closely resembles the human skull bone’s cancellous structure under acoustic loads. Transmission loss through flat and curved open-cell polyurethane foam samples is observed using air and water as the two interstitial fluids. Reduction in strength and stiffness caused by porosity can be recovered partially by filling the interstitial pores with a fluid. The test findings demonstrate the influence of the interstitial fluid on the mechanical characteristics of a porous structure in a quantitative manner. It is also demonstrated that the transmission loss does not depend only on the mass per unit area of the structure as predicted by acoustic mass law. Current tests also demonstrate that the transmission loss is more sensitive to the interstitial fluid than the shape and support conditions of the structures. Test observations thus support the concepts of “moisture-sensitivity of biological design” and the “law of hierarchy in natural design”.     

Micro-mechanical behaviors of SMA composite materials under hygro-thermo-elastic strain fields

An analytical procedure to evaluate the behavior of shape memory alloy (SMA) composite under hygrothermal environment is presented. The SMA wires are considered as inclusions embedded in a homogeneous matrix medium of the composite. The inhomogeneity associated with the phase transformation and thermal strains in the SMA wire as well as the hygrothermal strain in the matrix is homogenized using Eshelby’s equivalent inclusion method. In the present work, a similar approach adopted for SMA composites by Marfia and Sacco [Marfia, S., Sacco, E., 2005. Micromechanics and homogenisation of SMA-wire-reinforced materials. J. Appl. Mech. 72 (2), 259–268.] is considered in order to validate the response of SMA composite subjected to thermo-elastic strain field. However, in the present approach, certain modifications and new derivations for the inelastic strain tensors is carried out. First, the constitutive laws for the SMA wire and matrix are expressed in terms of the average strain in the composite. The evolutionary equations used to characterize the pseudoelastic (PE) behavior of the SMA wire are redefined in terms of the eigen strains (phase transformation and thermal strains) occurring in the SMA wire, which are then expressed in terms of the average strain in the composite. Further, the SMA composite constitutive law under coupled hygro-thermo-elastic strain fields is proposed. The generic homogenized hygric and thermal inelastic composite tensors required for the proposed hygro-thermo-elastic constitutive law are derived. Finally, the SMA composite lamina is characterized using Eshelby’s equivalent inclusion method. Using the proposed modifications and derivations, the analytical results are validated for the case of thermo-elastic strain fields and the procedure is then extended to evaluate the SMA composite behavior under hygro-thermo-elastic strain fields. The results include the effect of thermo-elastic and hygro-thermo-elastic strains on the transformation stresses and the nature of hysteresis due to hygric and thermo-elastic strains.     

Highly stereoselective synthesis of peracylated α-aldopyranosyl chlorides from aldopyranose peracetates and thionyl chloride catalyzed by BiCl3 generated in situ from the procatalyst BiOCl

Aldopyranose peracetates react with thionyl chloride and BiCl₃, generated in situ from a substoichiometric amount of the procatalyst BiOCl, producing the corresponding peracylated aldopyranosyl chlorides in very good to excellent yields (82–97%) with exclusive α-anomeric selectivity.     

Fluctuation study of pionisation in ultrarelativistic nucleus-nucleus interaction

The scaled factorial moments and the multifractal moments have been investigated in differentη-intervals to study the dynamical fluctuation of pions produced in 200 AGeV³²S-Ag/Br interaction. In order to investigate the detail characteristics of intermittency behaviour, theF-moments are extracted up to the eighth order of moments in differentM-intervals. The analysis indicates a non-thermal phase transition and different regime of particle production during the hadronisation process.     

Gamma ray photon-induced modifications in Triafol-TN and Triafol-BN polymeric track detectors

Photon induced modifications in Triafol-TN and Triafol-BN polymers have been studied in the dose range of 10¹–10⁶ Gy at room temperature using a ⁶⁰Co source. To monitor the chemical and structural changes induced by gamma rays, UV, IR, and ESR studies were carried out. Thermal studies were also conducted for understanding the effects of gamma irradiations on these polymers. Variation of track etching characteristics and activation energy for bulk etching have been studied at different gamma rays doses. The experimental results are presented and discussed.     

Flicker noise in degenerately doped Si single crystals near the metal-insulator transition

In this paper we report some of the important results of experimental investigations of the flicker noise near the metal-insulator (MI) transition in doped silicon single crystals. This is the first comprehensive work to study low-frequency noise in heavily doped Si over an extensive temperature range (2 K<T<500 K). The measurements of conductance fluctuations (flicker noise) were carried out in the frequency range 10⁻²<f<4 × 10¹ Hz in single crystalline Si across the MI transition by doping with phosphorous and boron. The magnitude of noise in heavily doped Si is much larger than that seen in lightly doped Si over the whole temperature range. The extensive temperature range covered allowed us to detect two distinct noise mechanisms. At low temperatures (T<100 K) universal conductance fluctuations (UCF) dominate and the spectral dependence of the noise is determined by dephasing the electron from defects with two-levels (TLS). At higher temperatures (T>200 K) the noise arises from activated defect dynamics. As the MI transition is approached, the 1/f spectral power, typical of the metallic regime, gets modified by the presence of discrete Lorentzians which arise from generation-recombination process which is the characteristic of a semiconductor.     

Environment-induced decoherence II. Effect of decoherence on Bell''s inequality for an EPR pair

According to Bell's theorem, the degree of correlation between spatially separated measurements on a quantum system is limited by certain inequalities if one assumes the condition of locality. Quantum mechanics predicts that this limit can be exceeded, making it nonlocal. We analyse the effect of an environment modelled by a fluctuating magnetic field on the quantum correlations in an EPR singlet as seen in the Bell inequality. We show that in an EPR setup, the system goes from the usual ‘violation’ of Bell's inequality to a ‘non-violation’ for times larger than a characteristic time scale which is related to the parameters of the fluctuating field. We also look at these inequalities as a function of the spatial separation between the EPR pair.     

Effect of benzophenone on the H2O2-induced photopolymerization of methyl methacrylate

Benzophenone (BP) in low concentrations (<0.001 mol 1^?1) produces a rate enhancing effect in the H₂O₂-induced bulk photopolymerization of MMA. R_p is proportional to [H₂O₂]^0.4 and [BP]^0.4, and $\text{k}{}_{\mathrm{p}}{}^2\text{k}{}_1$ at 30° is 1.00 × 10^?2 1.mol^?1 sec^?1. In diluted systems, different solvents produce different kinetic effects, reaction order with respect to monomer being negative for IPA and THF as solvent, positive but <1.0 for benzene and chloroform, 1.2 for acetonitrile, CCl₄ and t-butanol and 1.8 for DMA. The variable solvent effect is attributed to modification of the initiation process by the various solvents to different extents. Kinetic analysis of data for bulk photopolymerization gives evidence for primary radical termination and degradative initiator transfer.