Analysis of 99Tc in the radioactive liquid waste after extraction into suitable solvent

⁹⁹Tc is one of the long lived fission product with high fission yield. From radioactive waste management point of view it is very much essential to evaluate the concentration of technetium in the radioactive liquid waste in order to finalise the treatment process to extract/isolate it from the stream which is discharged to the environment. For the estimation of ⁹⁹Tc in the radioactive liquid waste stream, extraction of the stable complex of technetium-tetraphenyl arsonium chloride (TPAC) into chloroform followed by beta counting was studied. Various parameters like pH, time of equilibration, concentration of TPAC in chloroform, use of other solvent for extraction as well as interference of various other radionuclides present in the waste were also studied. The radioactive liquid waste being handled in plant contains high concentrations of salts in the form of sodium nitrate. Hence effect of salt concentration on the percentage extraction was also evaluated. The extraction behavior does not dependent on change in the pH of the solution. Almost 99.5% extraction was observed in the pH range of 1?C13.0. High concentration of salt is affecting the extraction. However, this can be taken care by diluting the radioactive waste. It takes almost 90?min time for maximum extraction. Presence of radionuclides like ¹³⁷Cs, ⁹⁰Sr are not interfering the extraction of ⁹⁹Tc. However, ¹⁰⁶Ru is getting slightly extracted along with ⁹⁹Tc. The error due to ¹⁰⁶Ru can be eliminated by taking gamma spectrum and deducting the activity from the total beta activity to get ⁹⁹Tc activity. Nitrobenzene can be used for extraction of Tc?CTPAC complex in place of chloroform.     

Measurement of the neutron capture cross-section of 238U using the neutron activation technique

The ²³⁸U(n, ??)²³⁹U reaction cross-section at average neutron energy of 3.7?±?0.3?MeV from the ⁷Li(p, n)⁷Be reaction has been determined using activation and off-line ??-ray spectrometric technique. The ²³⁸U(n, ??)²³⁹U and ²³⁸U(n, 2n)²³⁷U reaction cross-sections at average neutron energy of 9.85?±?0.38?MeV from the same ⁷Li(p, n)⁷Be reaction have been also determined using the above technique. The experimentally determined ²³⁸U(n, ??)²³⁹U and ²³⁸U(n, 2n)²³⁷U reaction cross-sections were compared with the evaluated data of ENDF/B-VII, JENDL-4.0, JEFF-3.1 and CENDL-3.1. The experimental values were found to be in general agreement with the evaluated value based on ENDF/B-VII, and JENDL-4.0 but not with the JEFF-3.1 and CENDL-3.1. The present data along with literature data in a wide range of neutron energies were interpreted in terms of competition between different reaction channels including fission. The ²³⁸U(n, ??)²³⁹U and ²³⁸U(n, 2n)²³⁷U reaction cross-sections were also calculated theoretically using the TALYS 1.2 computer code and were also found to be in agreement experimental data.     

Synthesis and anti-tumor activity of β-C-glycoside analogs of the immunostimulant KRN7000

A ring-closing metathesis approach was employed for the synthesis of a β-C-glycoside analog of the immunostimulant KRN7000. The protected C-glycosyl amino acid derivative 18 was converted to amino-olefin 20, and osmylation served to install the diol unit as a mixture of separable syn and anti isomers. Deprotection to the hydroxy-amine 21 was followed by N-acylation and debenzylation to deliver the target compound 5.     

Click chemistry‐based synthesis of azo polymers for second‐order nonlinear optics

Four linear polymers containing pendant azo moiety were synthesized through click chemistry for second‐order nonlinear optical study. The polymers were found soluble in most of the polar organic solvents such as tetrahydrofuran (THF), chloroform, and dimethyl formamide (DMF). The polymers showed thermal stability up to 300 °C and glass transition temperatures (T_g) in the range of 120–140 °C. The molecular weights (M_w) of these polymers (measured by gel permeation chromatography) were in the range 37,900–55,000 g/mol. The polymers were found to form optically transparent films by solution casting from THF solution. Order parameters were calculated from UV–vis absorption spectra. The morphology changes in the films after poling were characterized by atomic force microscopy. The angular dependence, temperature dependence, and time dependence of second harmonic generation (SHG) intensity were obtained by using 1064 nm Nd:YAG laser. The SHG intensity remained unchanged up to 95 °C. At room temperature, it remained stable up to 8 days after initial drop of about 14%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Glass fiber reinforced composites of phenolic–urea–epoxy resin blends

The present work aims to modify conventional epoxy resin by blending with four different phenolic–urea oligomers. These oligomers are similar to phenolic–urea resin matrix and simultaneously function as amino curing agent for epoxy matrix. In this context, phenolic–urea oligomers were prepared respectively by polycondensation reaction of four phenols namely phenol, m-cresol, resorcinol and 1,5-dihydroxy naphthalene, respectively with formaldehyde and urea in presence of acid catalyst. The resulting oligomers were characterized by elemental analysis, spectral studies (IR & NMR), number average molecular weight $(\overline{M}n)$ estimated by non-aqueous conductometric titration and thermal stability by thermogravimetric analysis (TGA). Each of these oligomers was used in resin matrix as a blending component for the modification of commercial epoxy resin for fabricating glass fiber reinforced laminates. Finally these laminates were evaluated for their synergetic thermal stability, mechanical properties and chemical resistance to different reagents.     

(1R,2S)‐2‐[N‐Methyl‐N‐(4‐toluene­sulfonyl)amino]‐1‐phenylpropan‐1‐ol

In the title compound, C₁₇H₂₁NO₃S, the S atom is in a distorted tetrahedral geometry and the N atom exhibits sp² character. The antiperiplanar conformation is observed for the N and hydroxyl‐O atoms and the torsion angle around the N—C linkage is ?136.3 (2)°. The mol­ecules are linked by O—H?O intermolecular hydrogen bonds to form an infinite one‐dimensional chains along the c axis.     

1:1 Hetero‐assembly of 2‐amino­pyrimidine and (+)‐camphoric acid

In the title cocrystal, 2‐aminopyrimidine–(+)‐camphoric acid (1/1), C₄H₅N₃·C₁₀H₁₆O₄, the 2‐amino­pyrimidine forms two eight‐membered hydrogen‐bonded rings with two different camphoric acid mol­ecules. This results in infinite wave‐like chains of mol­ecules in which neighbouring chains are connected by weak C—H?O contacts. The five‐membered ring in the acid mol­ecule adopts a half‐chair conformation.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

Vesicle Structures from Bolaamphiphilic Biosurfactants: Experimental and Molecular Dynamics Simulation Studies on the Effect of Unsaturation on Sophorolipid Self‐Assemblies

The formation of giant‐vesicle‐like structures by self‐assembling linolenic acid sophorolipid (LNSL) molecules is revealed. Sophorolipids belong to the class of bolaamphiphilic glycolipid biosurfactants. Interestingly, the number of double bonds present in the hydrophobic core of sophorolipids is seen to have a great influence on the type of self‐assembled structures formed. Dye encapsulation results establish the presence of an aqueous compartment inside the LNSL vesicles. Molecular dynamics simulation (MD) studies suggest the existence of two possible conformations of LNSLs inside the self‐assembled structures and that LNSL molecules arrange in layered structures.     

Microwave-Assisted Graft Copolymerization of Cellulosic Fibers for Removal of Heavy Metal Ions from Aqueous Solution

Functional materials obtained from cellulosic biofibers have gained attention due to the growing demand for them in the field of wastewater remediation. In view of the technological significance of functionalized cellulosic biofibers in wastewater treatment, the present study is a green approach to functionalized cellulosic fibers through graft copolymerization under microwave irradiation. The grafted cellulosic polymers were subsequently subjected to heavy metal ion adsorption studies in order to assess their application in wastewater remediation. The effects of pH, contact time, temperature, and metal ion concentration were studied in batchwise adsorption experiments. The Langmuir, Freundlich, and Tempkin models were used to show the adsorption isotherms. The maximum monolayer capacities, q _m. calculated using the Langmuir isotherm for Zn²⁺, Cd²⁺, and Pb²⁺ were found to be 37.79, 69.68, and 96.81 mg/g respectively. The thermodynamic parameter ΔH° and ΔG° values for metal ion adsorption on functionalized cellulosic fibers showed that adsorption process was spontaneous as well as exothermic in nature.