Preparation and evaluation of monolithic poly(N-vinylcarbazole-co-1,4-divinylbenzene) capillary columns for the separation of small molecules

Short-term polymerization or the so-called low-conversion polymerization was applied for the preparation of N-vinylcarbazole (NVC) and 1,4-divinylbenzene (DVB) monolithic capillary columns. The synthesis was carried out by thermally initiated free radical copolymerization under the influence of inert micro- (toluene) and macroporogen (1-decanol) and α,α′-azoisobutyronitrile (AIBN) as radical initiator. The morphological and porous properties were studied by scanning electron microscopy (SEM), nitrogen adsorption, and mercury intrusion porosimetry (MIP). The copolymerization process was studied by monomer conversion measurements. This approach led to increased porosity and specific surface area. A specific surface area above 400 m²/g of the monolith and a distinct bimodal pore size distribution were obtained. The chromatographic performance was determined in terms of theoretical plate heights and number of theoretical plates. The lowest plate height value was found to be 3.9 μm (corresponding to ≈256,000 plates per meter) applying methylparaben utilizing an 80 mm?×?0.2 mm i.d. monolithic capillary. The developed NVC/DVB monolithic supports showed high separation efficiency towards small molecules, which was exemplified applying reversed-phase (RP) separation of alkylbenzenes, beta-blockers, flavanoids, parabens, and phenones. The loading capacity was analyzed for isocratic separation of seven alkylbenzenes and was found to be up to 77 ng total mass of alkylbenzenes. Furthermore, a long-term stability test of 1,000 consecutive runs was performed and resulted in a maximum variance of 0.97, 0.85, and 0.16 % RSD for resolution, peak width at half height, and retention times, respectively. The material was proven to have a high permeability of 1.11E?14 m², applying water as a mobile phase.     

The heterogeneous distribution of the liquid phase in partially filled porous glasses and its effect on self-diffusion

The spatial distribution of the liquid phase in a typical, partially filled, porous glass (VitraPor #5) has been examined with the aid of magnetic resonance microscopy and field gradient nuclear magnetic resonance diffusometry techniques. The correlation length of the material turned out to be long enough to permit the visualization of the microscopic heterogeneity of the material by magnetic resonance imaging. Contrasts are dominated by transverse relaxation depending on local filling degree, which in turn depends on local microstructure. The bimodal heterogeneity of the latter was also visualized by scanning electron microscopy. The effect of heterogeneity on an effective diffusion coefficient has been examined for polar (water) and nonpolar (cyclohexane) molecules.     

A Convenient Photocatalytic Fluorination of Unactivated CH Bonds

Fluorination reactions are essential to modern medicinal chemistry, thus providing a means to block site‐selective metabolic degradation of drugs and access radiotracers for positron emission tomography imaging. Despite current sophistication in fluorination reagents and processes, the fluorination of unactivated C? H bonds remains a significant challenge. Reported herein is a convenient and economic process for direct fluorination of unactivated C? H bonds that exploits the hydrogen abstracting ability of a decatungstate photocatalyst in combination with the mild fluorine atom transfer reagent N‐fluorobenzenesulfonimide. This operationally straightforward reaction provides direct access to a wide range of fluorinated organic molecules, including structurally complex natural products, acyl fluorides, and fluorinated amino acid derivatives.     

Tin-rich Phases RE2Au3Sn6 with RE = La,Ce, Pr,Nd, Sm – Synthesis,Structure, Magnetic Properties,and 119Sn Mössbauer Spectra

The stannides RE₂Au₃Sn₆ (RE = La, Ce, Pr, Nd, Sm) were synthesized from the elements by arc-melting. Small single crystals were grown by annealing samples in sealed tantalum tubes in an induction furnace with a special annealing sequence. The polycrystalline phases were characterized through their X-ray powder diffraction pattern. The structures of Ce₂Au₃Sn₆, Pr₂Au₃Sn₆, and Nd₂Au₃Sn₆ were refined from single-crystal X-ray diffractometer data. The RE₂Au₃Sn₆ stannides crystallize with the orthorhombic La₂Zn₃Ge₆ type, space group Cmcm. The basic structural building units are Au1@Sn₄ tetrahedra and Au2@Sn₅ square pyramids. These units are condensed to layers and the structure can be described by a simple stacking of tetrahedral and pyramidal layers with the rare earth cations in between. Temperature dependent susceptibility studies indicate that all rare earth atoms are in the trivalent oxidation state, as their effective magnetic moments match the expected values of the free RE³⁺ ions. Pr₂Au₃Sn₆ and Nd₂Au₃Sn₆ exhibit antiferromagnetic ordering at T_N = 6.3(1) and 6.7(1) K. Investigations of the electrical resistivity of La₂Au₃Sn₆ and Ce₂Au₃Sn₆ confirmed that these compounds are metallic, for La₂Au₃Sn₆ a lower resistivity was observed, in line with the absence of screening unpaired electrons. ¹¹⁹Sn Mössbauer spectra for La₂Au₃Sn₆, Ce₂Au₃Sn₆, Pr₂Au₃Sn₆ and Nd₂Au₃Sn₆ show a complex superposition of three sub-spectra which can be differentiated through their distinctly different quadrupole splitting parameters. The isomer shifts (1.87 to 2.22 mm · s^–1) indicate significant s electron density at the tin nuclei.     

Synthesis of Oligomeric Axially Bridged Ruthenium Phthalocyanines and 2,3-Naphthalocyanines

Bridged 2,3-naphthalocyaninatoruthenium oligomers {[MacRu(L)] _n } were synthesized and characterized using solid-state methods. For comparison, soluble t-butyl substituted phthalocyaninatoruthenium oligomers were prepared and their chain length examined by ¹H NMR spectroscopy. The powder conductivities of all bridged compounds ([MacRu(L)] _n ) were measured and the dependence of the conductivities on the bridging ligands is discussed.     

Ultrahigh molecular weight alternating propene/ethene/carbon monoxide terpolymers with elastic properties

Soluble propene/ethene/CO terpolymers (EPEC) with ultrahigh molecular weight (up to 1.2 × 10⁶ g/mol) were prepared by the use of dicationic palladium(II) phosphine catalysts and an optimized amount of water as activator. When the molar ratio of ethene/CO to propene/CO is below 50 mol-%, the terpolymers are thermoplastic elastomers with excellent properties. Above this ratio the terpolymers are crystalline thermoplastics. The ultrahigh molecular weight elastomers are highly soluble in organic solvents such as CH₂Cl₂ and CHCl₃.