Electron paramagnetic resonance study of partially oriented clay platelets intercalated with copper(II) 1,4,8,11-tetraazacyclotetradecane

Electron paramagnetic resonance (EPR) spectra of powder and oriented films of montmorillonite, hectorite, and saponite intercalated with [Cu(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) exhibit three components: an orientation-dependent component without hyperfine features, an orientation-dependent component with hyperfine features, and an orientation-independent component without hyperfine feature. EPR spectra of [Cu(cyclam)](2+)-saponite, which exhibit only two components and the best resolved hyperfine features, were simulated. The spectra indicate that a large portion of the saponite platelets are inclined to the glass surface, although they tend to align with their basal planes parallel to the glass surface. The orientation-dependent spectra could be simulated by introducing a Gaussian distribution with a standard deviation of 20 degrees for the inclination angle. The standard deviation may be used as a disorder parameter for the microcrystals assembled on glass plates. Spectral simulation also shows that the CuN(4) plane of [Cu(cyclam)](2+) is parallel to the clay layers. EPR spectra of some other partially oriented systems are also discussed.     

Umsetzung von Metall- und Metalloidverbindungen mit mehrfunktionellen Molekülen, 31. Mitteilung

The reaction of galliumtrichloride and galliumtribomide resp. with 2,6-dimethyl- and 2,4,6-trimethyl-N-trimethylsilyl-trifluoroacetanilide leads to the trifluoracetanilidodihalogenogallanes1–3. The 2,6,9-trioxa-4,8-diaza-1,5-digalla-bicyclo-[3.3.1]-nonadiene derivatives1 a–3 a are formed probably as by products.N-Trimethylsilyltrifluoroacetamide reacts with galliumtrichloride to yield the trifluoroacetamido-dichlorogallane4.N-Trimethylsilyl-N,N,N-triorganyl-thioureas react with galliumtrichloride under elimination of chlorotrimethylsilane to give the thio-ureido-gallanes5 and6. IfN,N-diorganylureas andN,N-diorganyl-thio-ureas resp. are reacted with galliumtrichloride and methyl-gallium-dichloride resp., the thio-ureido- and ureido-gallanes7–9 are obtained by elimination of hydrogenchloride. The compounds are characterized by analysis and spectral data (NMR:¹H,¹⁹F; MS; IR). The substances are monomeric in the gas phase, obviously due to internal coordination.

30. Mitt.:W. Maringgele undA. Meller, J. Organomet. Chem., im Druck.     

Mg2Ru5B4 und Mg5Ru13B11, zwei ternäre Magnesium-Rutheniumboride mit Kanalstrukturen

Mg₂Ru₅B₄ and Mg₅Ru₁₃B₁₁, Two Ternary Magnesium Ruthenium Borides with Channel Structures The ternary borides Mg₂Ru₅B₄ and Mg₅Ru₁₃B₁₁, crystallizing in the orthorhombic space group Pbam, were prepared by reaction of the elementary components in sealed tantalum ampoules. Mg₂Ru₅B₄ (a = 1000.0(2) pm, b = 837,6(1) pm, c = 295.42(3) pm, Z = 2, R_W = 0.027 for 563 reflections) is homeotypic with Sc₂Ru₅B₄. The structure contains BRu₆-trigonal prisms, connected by faces and edges to form pentagonal channels filled with chains of magnesium atoms. Mg₅Ru₁₃B₁₁ (a = 2190.1(2) pm, b = 996.7(2) pm, c = 294.65(3) pm, Z = 2, R_W = 0.031 for 959 reflections) has a similar but so far unknown structure in which parts of the magnesium and boron atoms are disordered.     

Anatase-Rutile Transition of Precipitated Titanium Oxide with Alcohol Rinsing

The effect of alcohol washing on the anatase-rutile transition of precipitated titanium oxide was investigated using X-ray powder diffraction, Fourier-transform IR spectroscopy, and thermogravimetry. Alcohol (butanol) rinsing accelerated the anatase-rutile transition of precipitated titanium oxide powder so that the onset temperature of transition decreased drastically from 800 degrees C for water-washed powder to 550 degrees C for alcohol-rinsed powder. Alternation of transition kinetics and mechanisms by rinsing media could be confirmed from the analysis of temperature and time dependence of rutile content. The attributability of the chemical state of anatase after crystallization, which contained H(2)O, OH, and organic residues, to the change of transition kinetics with alcohol rinsing will be discussed. Two mechanisms, the effect of residual organics and/or H(2)O(OH), could be suggested on the basis of analysis of the difference between chemical states of water-washed anatase and alcohol-rinsed powder. Copyright 2000 Academic Press.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Photochemistry of 2-Allyl-3-oxo-2,3-dihydro-1H-pyrrole-2-carboxyalates

On acetone-sensitized irradiation the title compounds 3a–c are converted to 2-allyl-3-hydroxy-1H-pyrrole-2-carboxylates 4 in reasonable yields.     

Computer-Assisted Solution of Chemical Problems—The Historical Development and the Present State of the Art of a New Discipline of Chemistry

The topic of this article is the development and the present state of the art of computer chemistry, the computer-assisted solution of chemical problems. Initially the problems in computer chemistry were confined to structure elucidation on the basis of spectroscopic data, then programs for synthesis design based on libraries of reaction data for relatively narrow classes of target compounds were developed, and now computer programs for the solution of a great variety of chemical problems are available or are under development. Previously it was an achievement when any solution of a chemical problem could be generated by computer assistance. Today, the main task is the efficient, transparent, and non-arbitrary selection of meaningful results from the immense set of potential solutions—that also may contain innovative proposals. Chemistry has two aspects, constitutional chemistry and stereochemistry, which are interrelated, but still require different approaches. As a result, about twenty years ago, an algebraic model of the logical structure of chemistry was presented that consisted of two parts: the constitution-oriented algebra of be- and r-matrices, and the theory of the stereochemistry of the chemical identity group. New chemical definitions, concepts, and perspectives are characteristic of this logic-oriented model, as well as the direct mathematical representation of chemical processes. This model enables the implementation of formal reaction generators that can produce conceivable solutions to chemical problems—including unprecedented solutions—without detailed empirical chemical information. New formal selection procedures for computer-generated chemical information are also possible through the above model. It is expedient to combine these with interactive methods of selection. In this review, the Munich project is presented and discussed in detail. It encompasses the further development and implementation of the mathematical model of the logical structure of chemistry as well as the experimental verification of the computer-generated results. The article concludes with a review of new reactions, reagents, and reaction mechanisms that have been found with the PC-programs IGOR and RAIN.     

In situ determination of adsorption kinetics of proteins in a finite bath

A method for fast in situ measurement of adsorption kinetics based on a finite bath was developed. We modified the conventional finite bath by replacing the external loop by a dip probe which enables in situ measurement of the concentration change in the contactor. Deposition of adsorbent particles on the reflection surface of the dip probe compromised measurements. Different membranes, a polyamide, a polypropylene and a nylon membrane were tested to protect the internal reflection surface of the dip probe from fouling with adsorbent particles. The nylon membrane provided efficient protection and high mass transfer evaluated by response time experiments. Unspecific adsorption of the model protein on the membrane could also be excluded. To corroborate the measurements of the dip probe the results were compared to a conventional finite bath and to a shallow-bed. The uptake curves for human polyclonal IgG at different concentrationes (0.1-3 g/l) on rProtein A Sepharose FF and MabSelect were used as model system. The effective diffusion coefficients were determined using a pore diffusion model. These values were in good agreement for all methods.