(A19N7)[In4]2 (A = Ca,Sr) and (Ca4N)[In2]: Synthesis,Crystal Structures,Physical Properties,and Chemical Bonding

Single phase powders of (A₁₉N₇)[In₄]₂ (A = Ca, Sr) and (Ca₄N)[In₂] were prepared by reaction of melt beads of the metallic components with nitrogen. The crystal structure of (Ca₁₉N₇)[In₄]₂ was refined based on neutron and X‐ray powder diffraction data. The crystal structure of (Sr₁₉N₇)[In₄]₂ was solved from the X‐ray powder pattern. The structure refinements in combination with results from chemical analyses ascertain the compositions. The compounds (A₁₉N₇)[In₄]₂ (A = Ca, Sr) are isotypes of (Ca₁₉N₇)[Ag₄]₂; (Ca₁₉N₇)[In₄]₂ is probably identical to the earlier reported (Ca_18.5N₇)[In₄]₂. The crystal structure of the isotypes (A₁₉N₇)[In₄]₂ (A = Ca, Sr; cubic, , Ca: a = 1471.65(3) pm; Sr: a = 1561.0(1) pm) contains isolated [In₄] tetrahedra embedded in a framework of edge‐ and vertex‐sharing (A₆N) octahedra. Six of these octahedra are condensed by edge‐sharing around one central A²⁺ ion to form “superoctahedra” (A₁₉N₆) which are connected three‐dimensionally via further octahedra by corner‐sharing. The crystal structure of (Ca₄N)[In₂] (tetragonal, I4₁/amd, a = 491.14(4) pm, c = 2907.7(3) pm) consists of alternating layers of perovskite type slabs of vertex‐sharing octahedra (Ca₂Ca_4/2N) and parallel arranged infinite zigzag chains equation/tex2gif-stack-1.gif[In₂]. In the sense of Zintl‐type counting the compounds (A²⁺)₁₉(N^3?)₇[(In^2.125?)₄]₂ present an electron excess, (Ca²⁺)₄(N^3?)[(In^2.5?)₂] is electron deficient. Metallic properties are supported by electrical resistivity and magnetic susceptibility measurements. The analysis of the electronic structures gives evidence for the existence of homoatomic interactions In–In and significant heteroatomic metal–metal interactions Ca–In which favor the deviations of the title compounds from the (8 – N) rule.     

Fragmentation and reaction processes in cluster-surface collisions

We review the processes which have been observed from collisions between alkali-halide clusters and solid surfaces. Soft impact of nanocrystalline Na_nF _n?1 ⁺ clusters against solid surfaces causes them to cleave along the lowest energy (100) plane. At higher collision energies (E_i>1 eV/atom), an evaporative cascade occurs which is characteristic of a transformation of the nanocrystal to a molten state. Efficient F^? transfer from the cluster to the surface can occur for the larger clusters (>60 atoms) scattering from Si(111), in direct competition with the cleaving channel at low energies. In this regime, strong bonds can form between the F^? and silicon surface. The reaction probability increases with cluster size indicating that an impact-initiated shock wave is needed to enhance the reactive process.     

On the reaction of dithiocarbamates with nitrogen-containing derivates of oxalic acid

Summary The action of bisimidochlorides of oxalic acid on dithiocarbamates produces 2-thioxo-3-aryl(alkyl)-4,5-diiminothiazolidines by cycloacylation. The molecular structure of 2-thioxo-3-(4-methoxyphenyl)-4,5-bis(phenylimino)-thiazolidine is confirmed by X-ray crystal structure analysis.

---

Zur Reaktion von Dithiocarbaminaten mit stickstoffhaltigen Derivaten der Oxalsäure

Zusammenfassung Bei der Einwirkung von Bisimidchloriden der Oxalsäure auf Dithiocarbaminate entstehen durch Cycloacylierung 2-Thioxo-3-aryl(alkyl)-4,5-diiminothiazolidine. Die Molekülstruktur von 2-Thioxo-3-(4-methoxyphenyl)-4,5-bis(phenylimino)thiazolidin wird durch Röntgenkristallstrukturanalyse bestätigt.

     

Chinazolinone, 2. Mitt.: Synthese und einige Reaktionen von 2-Azidomethyl-3-aryl-4-chinazolinonen

Starting with the chloromethyl compounds7 the new 2-azidomethyl-3-aryl-4-quinazolinones8 a-h were prepared, some of which have been reduced so far to the corresponding amines9 a, b, e, g by H₂S in good yield. As a first example for the capability of the azides8 to undergo 1,3-dipolar cycloaddition the 2-quinazolinmethyl-1,2,3-triazol-4,5-dicarboxylicacid dimethylesters11 b, e, g were prepared by reacting8 with dimethylacetylenedicarboxylate (10).

1. Mitt.:Domanig R., Arch. Pharm., im Druck.     

Direct episulfidation of alkenes and allenes with elemental sulfur and thiiranes as sulfur sources,catalyzed by molybdenum oxo complexes

The molybdenum oxo complexes 1a and 1b catalyze efficiently the sulfur transfer to a series of alkenes 4 and allenes 6, for which elemental sulfur, phenylthiirane, or methylthiirane have been employed as sulfur sources to afford the corresponding episulfides 5 and 7. The most effective catalytic episulfidation system to date is the combination of the dithiophosphate-ligated oxo complex 1b and phenylthiirane (Ibeta). This metathesis process is efficient enough to convert usually reluctant alkenes (cyclopentene, cycloheptene, Z-cyclooctene, Z-cyclononene, E-cyclodecene, norbornene, and even bicyclopropylidene) to their episulfides in good yields under mild conditions. The direct catalytic sulfuration of allenes (cyclonona-1,2-diene, cyclonona-1,2,5-triene, cyclodeca-1,2-diene, and 2,4-dimethylpenta-2,3-diene) to their labile methylenethiiranes is unprecedented.     

Non-linear calibration functions in ion chromatography with suppressed conductivity detection using hydroxide eluents

The linearity of calibration curves in ion chromatography with suppressed conductivity detection using hydroxide eluents was investigated. Theoretical calibration curves were derived for strong electrolytes and weak monobasic acids and the results compared with experimental data. At low concentrations up to 1 micromol l(-1) the autoprotolysis of water induces left-curved calibration functions even for strong electrolytes like nitrate. The experimental data are best described by a quadratic function, the differences between linear and quadratic regression being up to 10%. At higher concentrations the calibration curves for strong electrolytes are linear. Due to incomplete dissociation, the calibration curves for weak mono- and dibasic acids show a right curvature. Thus, depending on the analyte and the concentration range of interest, analysts should carefully choose between a linear and a quadratic regression function.     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.     

Redox site confinement in highly unsymmetric dimanganese complexes

A set of highly preorganized pyrazolate-bridged dimanganese complexes L(Mn)MnX have been prepared and structurally characterized. They can be described as hybrid organometallic/Werner-type systems that consist of a low-spin CpMn(I)(CO)2 subunit (Mn1) and a proximate tripodal tetradentate {N4} binding pocket accommodating a high-spin Mn(II) ion (Mn2), with Mn...Mn distances of approximately 4.3 A and different coligands bound to Mn2. Density functional theory (DFT) calculations (both the hybrid B3LYP and the pure BP86 functionals and the all-electron basis sets 6-311G and 6-311G*) confirm that the valence alpha and beta Kohn-Sham molecular orbitals (MOs) of these mixed-valent Mn(I)Mn(II) compounds have predominant Mn(3d) character and an almost perfectly localized nature: all five unpaired electrons are essentially localized at the Werner-type Mn2, whereas Mn1 possesses an effective closed-shell structure with the MOs of highest energy centered there. One-electron oxidation occurs in a clean process at approximately E(1/2) = -0.6 V (versus ferrocene/ferrocinium), giving the low-spin/high-spin Mn(II)Mn(II) species. UV/vis and IR spectroelectrochemistry as well as a detailed theoretical analysis reveal that the redox process takes place with strict site control at the organometallic subunit, while it does not significantly influence the spin and charge distribution on the Werner-type site. Positions and shifts of the nu(C[triple bond]O) absorptions are largely reproduced by the DFT calculations. These systems thus represent an exceptional example of the effect the unsymmetry of a dinucleating ligand scaffold has on the spin and charge distribution in homobimetallic complexes and might offer interesting prospects for the study of the cooperative effects of bimetallic arrays.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.