Molecular Hybridization Strategy on the Design,Synthesis, and Structural Characterization of Ferrocene-N-acyl Hydrazones as Immunomodulatory Agents

Immunomodulatory agents are widely used for the treatment of immune-mediated diseases, but the range of side effects of the available drugs makes necessary the search for new immunomodulatory drugs. Here, we investigated the immunomodulatory activity of new ferrocenyl-N-acyl hydrazones derivatives (SintMed(141–156). The evaluated N-acyl hydrazones did not show cytotoxicity at the tested concentrations, presenting CC₅₀ values greater than 50 µM. In addition, all ferrocenyl-N-acyl hydrazones modulated nitrite production in immortalized macrophages, showing inhibition values between 14.4% and 74.2%. By presenting a better activity profile, the ferrocenyl-N-acyl hydrazones SintMed149 and SintMed150 also had their cytotoxicity and anti-inflammatory effect evaluated in cultures of peritoneal macrophages. The molecules were not cytotoxic at any of the concentrations tested in peritoneal macrophages and were able to significantly reduce (p < 0.05) the production of nitrite, TNF-α, and IL-1β. Interestingly, both molecules significantly reduced the production of IL-2 and IFN-γ in cultured splenocytes activated with concanavalin A. Moreover, SintMed150 did not show signs of acute toxicity in animals treated with 50 or 100 mg/kg. Finally, we observed that ferrocenyl-N-acyl hydrazone SintMed150 at 100 mg/kg reduced the migration of neutrophils (44.6%) in an acute peritonitis model and increased animal survival by 20% in an LPS-induced endotoxic shock model. These findings suggest that such compounds have therapeutic potential to be used to treat diseases of inflammatory origin.     

Thermal characterization of hydrotalcite used in the transesterification of soybean oil

Hydrotalcite was synthesised by co-precipitation method, calcined and characterized by XRD, BET, IR and TG/DTA/DTG analyses and tested as solid base catalyst in the transesterification of soybean oil with methanol, achieving a methyl ester content of 99.5%. The thermal decomposition of hydrotalcite calcined occurred in four mass loss steps at 28, 105, 203 and 400 °C. The hydrotalcite was recovered and through a simple evaluation by TG/DTA/DTG techniques it was found that at 500 °C is the temperature, where the organic matter should be eliminated from the catalyst. This study shows the importance of thermal analysis in the evaluation of the recovery temperature of hydrotalcite.     

Construction and evaluation of a flow injection micro-analyser based on urethane-acrylate resin

A flow injection micro-analyser with an integrated injection device and photometric detection is described. Channels measuring 205-295 μm depth by 265-290 μm maximum width were manufactured by deep UV lithography on two layers of urethane-acrylate oligomers-based photoresist. Hypodermic syringe needles (450 μm diameter) were connected to the channels for introduction of solutions into the system. Plastic optical fibres were connected to the ends of a 5.0 mm long channel, in order to conduct the light from and to a homemade photometer. The device has a total volume of 7.0 μL and three different sample volumes (0.09, 0.22 and 0.30 μL) can be inserted into the system by choosing the appropriate loop of the hydrodynamic injection approach. The micro-analyser, designed as a single line manifold, was evaluated by determining chloride in waters (mercuric thiocyanate method), and chromium (VI) in wastewater and total chromium in metallic alloys (diphenylcarbazide method). For chloride determination two micro-pumps were employed to impel the solutions, while for chromium determination this task was performed by a conventional peristaltic pump. The results obtained in all determinations did not differ significantly from the reference methods at a confidence level of 95%. In the chloride determination, a flow rate of 50 μL min⁻¹ was used, providing a sample frequency of 45 injection h⁻¹, generating ca. 0.7 mg of Hg(II) after an 8-h working day (ca. 20 mL of solution). This result suggests the potential of the micro-analyser towards the reduction of waste, following the philosophy of Green Chemistry.     

Thermal Diffusivity and Adsorption Kinetics of Silica-Gel/Water

There have been performed experimental measurements of effective thermal conductivity of silica-gel for a stagnant cylindrical fixed bed under transient and steady state conditions in the presence of dry air at different pressures and for different amounts of adsorbed water. The Bauer-Schlünder and Kunii-Smith models have been used to identify the thermal solid conductivity of silica gel pellets from measurements of the conductivity in an adsorbent bed. Sorption rates of water vapor in silica gel were measured using a single-step thermal method by monitoring the sample surface temperature by infrared detection. In order to obtain the mass diffusivity it is necessary to match the numerical solution of the mathematical model to the experimental data.     

Hydration mechanisms of supersulfated cement

Considerable attention has been given to special cements, capable of reducing CO₂ emissions, energy and limestone consumption. Supersulfated cements are made of blast furnace slag (GBFS), calcium sulfate (CS), and small quantities of activator, but achieving their optimal proportions is complex. In this paper, the effects of the both CS and alkali activator (KOH) contents were studied. The main results showed that the compressive strength, heat of hydration, and consumption of anhydrite phase were strongly influenced by the alkaline content, while low calcium sulfate or alkaline content increased the formation of CSH. The instability of ettringite was verified: with low CS, the probable hypothesis was its conversion into monosulfate due to the scarcity of sulfate; with high CS, it was associated with intense, rapid consumption of anhydrite with high KOH content, followed by the precipitation of ettringite on the surface of slag grains and its conversion into monosulfate.     

Morphology and performance of CoOOH films synthesized via electrochemical oxidation: substrate effects

In the present work, CoOOH films are synthesized from the electrochemical oxidation of α-Co(OH)₂ as precursor. The substrate influences on the material electrochemical properties are studied. The samples are structural and morphologically characterized using techniques of X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy techniques are used for the electrochemical characterization. The films deposited on steel substrate grew in the vertical hexagonal platelet form. Meanwhile, films on Ti plate presented morphology in agglomerated sphere form. After electrochemical oxidation, the film initial morphology is maintained. The films deposited on steel plate have a structure which favors charge storage showing a high specific capacity value (110.92 mA h g^?1) and cyclic stability of 92% after 1000 cycles. Finally, the relaxation time constant value calculated was 5.6 s. This fact is making this material as a possible good candidate for application as electrode material or additive for other materials, in energy storage devices.     

Influence of trace elements supplementation on the production of recombinant frutalin by Pichia pastoris KM71H in fed-batch process

Frutalin, a galactose-specific lectin used to detect specific tumour markers, is a protein with low expression level in breadfruit. In the present study, fed-batch fermentation in a stirred tank bioreactor was used as a strategy to enhance protein production by a recombinant Pichia pastoris KM71H. By using this process, the production of recombinant frutalin was 4-fold higher than the value obtained in shaker flasks batch assays. Supplementation of the fermentation medium with trace elements (Pichia trace minerals, PTM) was also evaluated in order to stimulate production of the recombinant protein. The addition of PTM to the minimum medium afforded a recombinant protein production of 13.4 mg L^?1, which was 2.5-fold higher than that achieved from the culture medium without PTM supplementation. These results are significant as the development of strategies to improve the production of recombinant frutalin may broaden its application in cancer diagnosis.     

Thermal, rheological, and structural behaviors of natural and modified cassava starch granules, with sodium hypochlorite solutions

The use of chemically modified starches is widely accepted in various industries, with several applications. In this research, natural cassava starch granules were treated with standard sodium hypochlorite solution at 0.8, 2.0, and 5.0 g Cl/100 g starch. The native and modified starch samples were investigated by means of the following techniques: simultaneous thermogravimetry–differential thermal analysis, which allowed us to verify the thermal decomposition associated with endothermic or exothermic phenomena; and differential scanning calorimetry that was used to determine gelatinization enthalpy as well as the rapid viscoamylographic analysis that provided the pasting temperature and viscosity. By means of non-contact-atomic force microscopy method and X-ray powder patterns diffractometry, it was possible to observe the surface morphology, topography of starch granules, and alterations in the granules’ crystallinity.