Structural and EPR studies on single-crystal and polycrystalline samples of copper(II) and cobalt(II) complexes with N2S2-based macrocyclic ligands

The properties of Cu(II) and Co(II) complexes with oxygen- or nitrogen-containing macrocycles have been extensively studied; however, less attention has been paid to the study of complexes containing sulfur atoms in the first coordination sphere. Herein we present the interaction between these two metal ions and two macrocyclic ligands with N2S2 donor sets. Cu(II) and Co(II) complexes with the pyridine-containing 14-membered macrocycles 3,11-dithia-7,17-diazabicyclo[11.3.1]heptadeca-1(17),13,15-triene (L) and 7-(9-anthracenylmethyl)-3,11-dithia-7,17-diazabicyclo[11.3.1]heptadeca-1(17),13,15-triene (L1) have been synthesized. The X-ray structural analysis of {[Co(ClO4)(H2O)(L)][Co(H2O)2(L)]}(ClO4)3 shows two different metal sites in octahedral coordination. The EPR spectra of powdered samples of this compound are typical of distorted six-coordinated Co(II) ions in a high-spin (S=3/2) configuration, with the ground state being S=1/2 (g1=5.20, g2=3.20, g3=1.95). The EPR spectrum of [Cu(ClO4)(L)](ClO4) was simulated assuming an axial g tensor (g1=g2=2.043, g3=2.145), while that of [Cu(ClO4)(L1)](ClO4) slightly differs from an axial symmetry (g1=2.025, g2=2.060, g3=2.155). These results are compatible with a Cu(II) ion in square-pyramidal coordination with N2S2 as basal ligands. Single-crystal EPR experiment performed on [Cu(ClO4)(L1)](ClO4) allowed determining the eigenvalues of the molecular g tensor associated with the copper site, as well as the two possible orientations for the tensor. On the basis of symmetry arguments, an assignment in which the eigenvectors are nearly along the Cu(II)-ligand bonds is chosen.     

Relaxed but highly compact diansa metallacyclophanes

A series of monoansa [μ-1,1'-PR-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) and diansa [8,8'-μ-(1',2'-benzene)-μ-1,1'-PR-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (R = Ph, (t)Bu) cobaltabisdicarbollidephanes have been synthesized, characterized and studied by NMR, MALDI-TOF-MS, UV-visible spectroscopy, cyclic voltammetry, and DFT calculations. Single crystal X-ray diffraction revealed a highly relaxed structure characterized by the title angle α of 3.8° ([7](-)), this being the smallest angle α for a metallacyclophane. In such compounds, the metal-to-phosphorus distance is less than the sum of their van der Waals radii. The availability of a phosphorus lone pair causes an electron delocalization through the metal, as shown by the abnormal (31)P NMR chemical shift. Remarkably, the combination of a phosphine donor and a phenyl acceptor moieties causes a synergistic effect that is observed through the different techniques used in this study. The importance of having an available lone pair is demonstrated by the oxidation of phosphorus with hydrogen peroxide, sulfur, and elemental black selenium to produce the corresponding P(V) compounds. When the electron lone pair is used to form the bond with the corresponding chalcogen atom, the communication between the donor and acceptor moieties on the diansa metallacyclophane is shut down.     

Uncommon coordination behaviour of P(S) and P(Se) units when bonded to carboranyl clusters: experimental and computational studies on the oxidation of carboranyl phosphine ligands

Oxidation of closo-carboranyl diphosphines 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr) and closo-carboranyl monophosphines 1-PR(2)-2-R'-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr, Cy; R'=Me, Ph) with hydrogen peroxide, sulfur and elemental black selenium evidences the unique capacity of the closo-carborane cluster to produce uncommon or unprecedented P/P(E) (E=S, Se) and P=O/P=S chelating ligands. When H(2)O(2) reacts with 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr), they are oxidized to 1,2-(OPR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr). However, when S and Se are used, different reactivity is found for 1,2-(PPh(2))(2)-1,2-closo-C(2)B(10)H(10) and 1,2-(PiPr(2))(2)-1,2-closo-C(2)B(10)H(10). The reaction with sulfur produces mono- and dioxidation products for R=Ph, whereas Se produces the mono-oxidation product only. For R=iPr, only monooxidation takes place with S, and the second C(c)-PiPr(2) bond breaks to yield 1-SPiPr(2)-1,2-closo-C(2)B(10)H(11). When Se is used, only 1-SePiPr(2)-1,2-closo-C(2)B(10)H(11) is formed. The potential of the mono-chalcogenide carboranyl diphosphines 1-EPPh(2)-2-PPh(2)-1,2-closo-C(2)B(10)H(10) (E=S, 9; Se, 15) to behave as unsymmetric chelating bidentate ligands was studied for different metal complexes, different solvents and in the solid state. Dechalcogenation takes place in each case. Computational studies provided information on the P=E (E=S, Se) bonds. Steric effects block the bonding ability of the P=E group due to interactions between the chalcogen and the neighbouring hydrogen atoms (three from the phenyl rings and one from the carborane cluster). The electronic effects originate from the strongly electron-withdrawing character of the closo carborane cluster, which polarizes the P=E (E=S, Se) bond towards the phosphorus atom. As a consequence, the E atom is the electron-poor site and the P atom the electron-rich site in the P=E bond.     

Synthesis, reactivity and structural studies of selenide bridged carboranyl compounds

Reaction of the lithium salt Li[1-R-1,2-closo-C(2)B(10)H(10)] with selenium under mild conditions, followed by hydrolysis gave the diselenide compound (1-Se-2-R-1,2-closo-C(2)B(10)H(10))(2) in contrast to the well-reported mercapto compounds 1-SH-2-R-1,2-closo-C(2)B(10)H(10) obtained using a similar synthetic procedure. Details for the preparation and X-ray structural characterisation of the new compounds (2-Me-1,2-closo-C(2)B(10)H(10))(2)Se, (1-Se-2-R-1,2-closo-C(2)B(10)H(10))(2) (R = Me, Ph, ) are specified. To further explore the mechanism of the dimerization reaction, the complex [Au(1-Se-2-Me-1,2-closo-C(2)B(10)H(10))(PPh(3))] was synthesized, confirming the existence of the intermediate Li[1-Se-2-R-1,2-closo-C(2)B(10)H(10)] at the early stages of the reaction before selenium oxidation. Theoretical calculations and cyclic voltammetry (CV) studies were carried out to compare the bonding nature of the sulfur and the selenium analog compounds. It was determined that diselenides have a higher tendency to reduce with respect to the disulfides and all chalcogen atoms were found to be positively charged.     

Synthesis of boron-iodinated o-carborane derivatives. Water stability of the periodinated monoprotic salt

Boron periodination of o-carborane has been achieved by taking account of the fact that B atoms in the cluster are of two types, i.e., those adjacent to both C atoms and the remainder. The high number of nonequivalent leaving groups opens the possibility through B-C coupling to materials with novel possibilities and to self-assembling due to the enhanced polarizability of the C-H bond. Periodination has accentuated the acidity of the carborane, and monoprotic salts are stable in water.     

Structural and magnetic diversity in cyano-bridged bi- and trimetallic complexes assembled from cyanometalates and [M(rac-CTH)]n+ building blocks (CTH = d,l-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane)

Seven new cyano-bridged heterometallic systems have been prepared by assembling [M'(rac-CTH)]n+ complexes (M' = CrIII, NiII, CuII), which have two cis available coordination positions, and [M(CN)6]3- (M = FeIII, CrIII) and [Fe(CN)2(bpy)2]+ cyanometalate building blocks. The assembled systems, which have been characterized by X-ray crystallography and magnetic investigations, are the molecular squares (meso-CTH-H2)[{Ni(rac-CTH)}2{Fe(CN)6)}2].5H2O (2) and [{Ni(rac-CTH)}2{Fe(CN)2(bpy)2}2](ClO4)4.H2O (5), the bimetallic chain [{Ni(rac-CTH)}2{Cr(CN)6)}2Ni(meso-CTH)].4H2O (3), the trimetallic chain [{Ni(rac-CTH)}2{Fe(CN)6)}2Cu(cyclam)]6H2O (4), the pentanuclear complexes [{Cu(rac-CTH}3{Fe(CN)6}2].2H2O (6) and [{Cu(rac-CTH)}3{Cr(CN)6)}2].2H2O (7), and the dinuclear complex [Cr(rac-CTH)(H2O)Fe(CN)6].2H2O (8). With the exception of 5, all compounds exhibit ferromagnetic interaction between the metal ions (JFeNi = 12.8(2) cm-1 for 2; J1FeCu= 13.8(2) cm-1 and J2FeCu= 3.9(4) cm-1 for 6; J1CrCu= 6.95(3) cm-1 and J2CrCu= 1.9(2)cm-1 for 7; JCrFe = 28.87(3) cm-1 for 8). Compound 5 exhibits the end of a transition from the high-spin to the low-spin state of the octahedral FeII ions. The bimetallic chain 3 behaves as a metamagnet with a critical field Hc = 300 G, which is associated with the occurrence of week antiferromagnetic interactions between the chains. Although the trimetallic chain 4 shows some degree of spin correlation along the chain, magnetic ordering does not occur. The sign and magnitude of the magnetic exchange interaction between CrIII and FeIII in compound 8 have been justified by DFT type calculations.