Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting

Journal of Solid State Electrochemistry - Herein, we report the synthesis of ZnO nanorod films onto FTO (fluorine-doped tin oxide) substrates using the solution-processed electrodeposition method....     

Mixed Boron(III) and Phosphorous(V) Complexes of meso‐Triaryl 25‐Oxasmaragdyrins

Two unprecedented mixed B^III/P^V complexes of meso‐triaryl 25‐oxasmaragdyrins were synthesized in appreciable yields under mild reaction conditions. These unusual 25‐oxasmaragdyrin complexes containing one or two seven‐membered heterocyclic rings comprised of five different atoms (B, C, N, O, and P) were prepared by reacting B(OH)(Ph)‐smaragdyrin and B(OH)₂‐smaragdyrin complexes, respectively, with POCl₃ in toluene at reflux temperature. The products were characterized by HRMS and 1D‐ and 2D‐NMR spectroscopy. X‐ray crystallography of one of the mixed B^III/P^V smaragdyrin complexes indicated that the macrocycle is significantly distorted and contains a stable seven‐membered heterocyclic ring within the macrocycle. The bands in the absorption and emission spectra were bathochromically shifted with reduced quantum yields and singlet‐state lifetimes relative to the free base, meso‐triaryl 25‐oxasmaragdyrin. The mixed B^III/P^V complexes were difficult to oxidize but easier to reduce than the free base. The DFT‐optimized structure of the 25‐oxasmaragdyrin complex with two seven‐membered heterocycles indicated that it was a bicyclic spiro compound with two half‐chair‐like conformers. This was in contrast to the chair‐like conformation of the complex with a single seven‐membered heterocyclic ring. Moreover, incorporation of a second phosphate group in the former case stabilized the bonding geometry and resulted in higher stability, which was reflected in the bathochromic shift of the absorption spectra, more‐positive oxidation potential, and less‐negative reduction potential.     

Correction to: Elucidating the therapeutic activity of selective curcumin analogues: DFT-based reactivity analysis

Structural Chemistry - A Correction to this paper has been published: https://doi.org/10.1007/s11224-021-01788-w     

Distribution of trace elements in flowing surface waters: Effect of seasons and anthropogenic practices in India

This study reports the distribution of Cr, Ni, Cu and Pb in waters, sediments, macrophytes and fish of the Yamuna River’s patch in Delhi (India). This is one of the most polluted stretches of rivers in the world. Water from this river is used fosr irrigation, industrial and domestic purposes, including drinking water. The effects of season and anthropogenic practices were identified. Almost zero dissolved oxygen and high levels of lead and phosphate indicate the polluted state of the aquatic system. The enrichment factors in sediments (with respect to reference site) vary in the range of 0.60–82.9% (Cr), 1.40–90.5% (Ni), 1.00–85.3% (Cu) and 3.80–86.6% (Pb). The toxic effects due to Ni and Pb could frequently be visible in aquatic life as their values fall above the probable effect level (36 mg Kg^?1 for Ni and 91.3 mg Kg^?1 for Pb). The metal contents in the macrophyte (Eichhornia crassipes) and the fish (Oreochromis niloticus) generally increase in the summer season. Cu and Pb accumulate preferentially in E. crassipes. The fish from these waters is unsuitable for human consumption as the levels of Cr, Cu and Pb are above the recommended limits. Significant spatial variations in parameters of water and sediments were confirmed via one-way analysis of variance. The Pearson’s correlation analysis suggests a common source of some of the metals. Principal component analysis highlighted domestic, and industrial waste and coal-fired thermal power plants as the metal sources. This study might act as a benchmark for other investigations focused on similarly affected surface aquatic systems due to agricultural and industrial activities.     

Molecules relevant for organic photovoltaics: a range-separated density functional study

Accurate determination of both fundamental and optical gap is necessary for designing molecules relevant for organic photovoltaics. Here, we study how range-separated density functionals reproduce frontier orbital energies, HOMO (highest occupied molecular orbital)–LUMO (lowest unoccupied molecular orbital) gaps, and optical gaps for molecules relevant for organic photovoltaics. In this study, we consider 12 different range-separated density functional for computing HOMO energy, HOMO–LUMO gap, and optical gap which are compared with available experimental and reported GW values. We found that the reproduction of desired photovoltaic properties primarily depend on range separation parameter. Moreover, the tested functionals are comparable with OT-BNL functional.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

Complexation of Macrocyclic Compounds with Nicotinamide in Dimethylsulphoxideand its Water Mixture

The complexation behavior of nicotinamide with macrocyclic polyethers viz, 15-crown-5, benzo-15-crown-5, 18-crown-6, dicyclohexano-18-crown-6, dibenzo-18-crown-6, dibenzo-24-crown-8, 1,4,7,10,13,16-hexathiacyclooctadecane, monoaza-15-crown-5, 1,4,10-trioxa-7,13-diaza-cyclopentadecane, 5,6,14,15-dibenzo-1,4-dioxa-8,12-diazacyclopentadecane, 7,16-dibenzyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane, 1,4,7-tritosyl-1,4,7-triazacyclononane, 1,4,7,10-tetratosyl-1,4,7,10-tetraazacyclododecane and 1,4,8,11-tetraazacyclooctadecane has been studied in dimethylsulphoxide (DMSO) and 90% DMSO + water using differential pulse polarography and complexation constants have been reported. Nicotinamide forms stable complexes with six-membered coronand rings of the crown ethers. The nature of the atoms (oxygen, sulfur and nitrogen) in the coronand ring is observed to affect the stability of the complex. The stoichiometry and stability constants of the complexes were determined by monitoring the shifts in peak potentials of the polarograms of nicotinamide against the ligand concentration. The Gibbs free energy change turns out to be negative at 25°C, which indicates the spontaneity of the binding of nicotinamide with crown ethers. The mole ratio of nicotinamide to the macrocyclic compound was also determined and it was found that the complexes were of 1:1 type with respect to crown ethers. The tendency of nicotinamide to form complexes with macrocycles is found to be greater in DMSO than in DMSO + water.     

Atom‐Efficient Gold(I)‐Chloride‐Catalyzed Synthesis of α‐Sulfenylated Carbonyl Compounds from Propargylic Alcohols and Aryl Thiols: Substrate Scope and Experimental and Theoretical Mechanistic Investigation

Gold(I)‐chloride‐catalyzed synthesis of α‐sulfenylated carbonyl compounds from propargylic alcohols and aryl thiols showed a wide substrate scope with respect to both propargylic alcohols and aryl thiols. Primary and secondary aromatic propargylic alcohols generated α‐sulfenylated aldehydes and ketones in 60–97 % yield. Secondary aliphatic propargylic alcohols generated α‐sulfenylated ketones in yields of 47–71 %. Different gold sources and ligand effects were studied, and it was shown that gold(I) chloride gave the highest product yields. Experimental and theoretical studies demonstrated that the reaction proceeds in two separate steps. A sulfenylated allylic alcohol, generated by initial regioselective attack of the aryl thiol on the triple bond of the propargylic alcohol, was isolated, evaluated, and found to be an intermediate in the reaction. Deuterium labeling experiments showed that the protons from the propargylic alcohol and aryl thiol were transferred to the 3‐position, and that the hydride from the alcohol was transferred to the 2‐position of the product. Density functional theory (DFT) calculations showed that the observed regioselectivity of the aryl thiol attack towards the 2‐position of propargylic alcohol was determined by a low‐energy, five‐membered cyclic protodeauration transition state instead of the strained, four‐membered cyclic transition state found for attack at the 3‐position. Experimental data and DFT calculations supported that the second step of the reaction is initiated by protonation of the double bond of the sulfenylated allylic alcohol with a proton donor coordinated to gold(I) chloride. This in turn allows for a 1,2‐hydride shift, generating the final product of the reaction.