Design,Synthesis and Evaluation of Antibacterial Effects of a New Class of Piperazinylquinolone Derivatives

Pentafluoropyridine derivatives and cyanuric chloride were used for the synthesis of new piperazinylquinolone derivatives. These reactions provided N‐fluoropyridiyl and N‐cyanoryl chloride piperazinylquinolone derivatives in good yields. Synthesized compounds were evaluated for their antibacterial activities. These compounds displayed good to excellent antibacterial activities.     

Study on electrical current variations in electromembrane extraction process: Relation between extraction recovery and magnitude of electrical current

This contribution presents an experimental approach to improve analytical performance of electromembrane extraction (EME) procedure, which is based on the scrutiny of current pattern under different extraction conditions such as using different organic solvents as supported liquid membrane, electrical potentials, pH values of donor and acceptor phases, variable extraction times, temperatures, stirring rates, different hollow fiber lengths and the addition of salts or organic solvents to the sample matrix. In this study, four basic drugs with different polarities were extracted under different conditions with the corresponding electrical current patterns compared against extraction recoveries. The extraction process was demonstrated in terms of EME-HPLC analyses of selected basic drugs. Comparing the obtained extraction recoveries with the electrical current patterns, most cases exhibited minimum recovery and repeatability at the highest investigated magnitude of electrical current. . It was further found that identical current patterns are associated with repeated extraction efficiencies. In other words, the pattern should be repeated for a successful extraction. The results showed completely different electrical currents under different extraction conditions, so that all variable parameters have contributions into the electrical current pattern. Finally, the current patterns of extractions from wastewater, plasma and urine samples were demonstrated. The results indicated an increase in the electrical current when extracting from complex matrices; this was seen to decrease the extraction efficiency.     

Haloperidol imprinted polymer: preparation,evaluation, and application for drug assay in brain tissue

Several molecularly imprinted polymers (MIPs) were prepared in the present work, and their binding properties were evaluated in comparison with a nonimprinted polymer (NIP). An optimized MIP was selected and applied for selective extraction and analysis of haloperidol in rabbit brain tissue. A molecularly imprinted solid-phase extraction (MISPE) method was developed for cleanup and preconcentration of haloperidol in brain samples before HPLC-UV analysis. Selectivity of the MISPE procedure was investigated using haloperidol and some structurally different drugs with similar polarity that could exist simultaneously in brain tissue. The extraction and analytical process was calibrated in the range of 0.05–10 ppm. The recovery of haloperidol in this MISPE process was calculated between 79.9 and 90.4 %. The limit of detection (LOD) and the limit of quantification (LOQ) of the assay were 0.008 and 0.05 ppm, respectively. Intraday precision and interday precision values for haloperidol analysis were less than 5.86 and 7.63 %, respectively. The MISPE method could effectively extract and concentrate haloperidol from brain tissue in the presence of clozapine and imipramine. Finally, the imprinted polymer was successfully applied for the determination of haloperidol in a real rabbit brain sample after administration of a toxic dose. Therefore, the proposed MISPE method could be applied in the extraction and preconcentration before HPLC-UV analysis of haloperidol in rabbit brain tissue.     

A novel homocystine-agarose adsorbent for separation and preconcentration of nickel in table salt and baking soda using factorial design optimization of the experimental conditions

Homocystine was for the first time, chemically linked to a highly cross-linked agarose support (Novarose) to be employed as a chelating adsorbent for preconcentration and AAS determination of nickel in table salt and baking soda. Nickel is quantitatively adsorbed on a small column packed with 0.25 ml of the adsorbent, in a pH range of 5.5–6.5 and simply eluted with 5 ml of a 1 mol l⁻¹ hydrochloric acid solution.

A factorial design was used for optimization of the effects of five different variables on the recovery of nickel. The results indicated that the factors of flow rate and column length, and the interactions between pH and sample volume are significant.

In the optimized conditions, the column could tolerate salt concentrations up to 0.5 mol l⁻¹ and sample volumes beyond 500 ml. Matrix ions of Mg²⁺ and Ca²⁺, with a concentration of 200 mg l⁻¹, and potentially interfering ions of Cd²⁺, Cu²⁺, Zn²⁺ and Mn²⁺, with a concentration of 10 mg l⁻¹, did not have significant effect on the analyte's signal. Preconcentration factors up to 100 and a detection limit of 0.49 μg l⁻¹, corresponding to an enrichment volume of 500 ml, were obtained for the determination of the analyte by flame AAS. Application of the method to the determination of natural and spiked nickel in table salt and baking soda solutions resulted in quantitative recoveries. Direct ETAAS determination of nickel in the same samples was not possible because of a high background observed.     

Encapsulation of a binuclear manganese(II) complex with an amino acid-based ligand in zeolite Y and its catalytic epoxidation of cyclohexene

A Schiff base ligand was synthesized by the condensation of salicylaldehyde with l-tyrosine. Interaction of this ligand with Mn(II)-exchanged zeolite Y leads to encapsulation of the ligand within the zeolite and complexation of the metal. The encapsulated complex has been characterized by spectroscopic studies and chemical analyses. This material serves as a catalyst for the oxidation of cyclohexene to cyclohexene epoxide and 2-cyclohexene-1-ol using H₂O₂ as oxidant. The reaction conditions have been optimized for solvent, temperature and amount of oxidant and catalyst. The catalyst shows high activity and selectivity toward production of cyclohexene epoxide in acetonitrile at 60 °C with [H₂O₂]/[C₆H₁₀] = 2.5 molar ratio. Comparison of the encapsulated catalyst with the corresponding homogeneous catalyst showed that the heterogeneous catalyst had higher activity and selectivity than the homogeneous catalyst.     

Hydrogen production via CO2-reforming of methane over Cu and Co doped Ni/Al2O3 nanocatalyst: impregnation versus sol–gel method and effect of process conditions and promoter

In this study, Cu and Co doped Ni/Al₂O₃ nanocatalyst was synthesized via impregnation and sol–gel methods. The physiochemical properties of nanocatalyst were characterized by XRD, field emission scanning electron microscopy (FESEM), particle size distribution, BET, fourier transform infrared spectroscopy (FTIR), TG–DTA and energy dispersive X-ray (EDX) analysis. The samples were employed for CO₂-reforming of methane in atmospheric pressure, temperature range from 550 to 850 °C, under various mixture of CH₄/CO₂ and different gas hourly space velocity. XRD patterns besides indicating the decline of the peaks intensity in sol–gel method, proved the potential of this procedure in diminishing the crystal size and preventing the NiAl₂O₄ spinel formation. Moreover, high surface area might derive of smaller particle size and uniform morphology of sol–gel prepared ones, confirmed by FESEM and BET analysis. TG–DTG analysis as well supported the higher surface area for sol–gel made ones, represented the proper calcination temperature (approximately 600 °C). Also, presence of the active phases and elemental composition of nanocatalysts determine via EDX analysis. Promoting the basicity and the adsorption rate of CO₂, is attributed to the higher amount of OH groups for sol–gel prepared samples, proved by FTIR. Ni–Co/Al₂O₃ due to the synergetic effect of sol–gel method and cobalt addition depicted excellent characterization such as higher surface area, smaller particle size, supplying more stable support and enhanced morphology. Therefore, this nanocatalyst represented the best products yield (H₂ = 98.21 and CO = 95.64), H₂/CO close to unit (0.92–1.05) and stable conversion during 1,440 min stability test. So, Ni–Co/Al₂O₃ among all of the prepared nanocatalysts demonstrated the best catalytic performance and presented it as a highly efficient catalyst for dry reforming of methane. Despite of the stable yield of Ni–Cu/Al₂O₃, it depicted the lower catalytic activity and H₂/CO ratio than the unprompted nanocatalysts.     

Modeling and active vibration suppression of a single-walled carbon nanotube subjected to a moving harmonic load based on a nonlocal elasticity theory

This paper investigates active vibration suppression of a single-walled carbon nanotube (SWCNT) under the action of a moving harmonic load using Eringen’s nonlocal elasticity theory. The SWCNT is modeled according to the nonlocal Euler–Bernoulli beam theory. A Dirac-delta function is used to describe the position of the moving load along the SWCNT. Next, a linear classical optimal control algorithm with displacement-velocity feedback is used to suppress vibration in the SWCNT with control forces acting as actuators. The effects of a small-scale parameter, slenderness ratio, moving load velocity, and the excitation frequency of a moving load on the dynamic deflection of the SWCNT are examined. Finally, the ability of the control algorithm to suppress the response of the SWCNT under the effects of a moving load with a number of controlled modes and control forces is surveyed.     

Dramatic influence of the substitution of alkylidene-5H-furan-2-ones in Diels-Alder cycloadditions with o-quinonedimethide as diene partner: en route to the CDEF polycyclic ring system of lactonamycin

An efficient and rapid synthesis of the CDEF ring system of lactonamycinone is reported via a highly chemo- and diastereoselective intermolecular Diels-Alder cycloaddition between trans-1,2-disilyloxybenzocyclobutene and the appropriate γ-alkylidenebutenolide. The feasibility and the total chemoselectivity of the [4 + 2] cycloaddition for the construction of a spirolactone moiety via an intramolecular approach (IMDA) using both partners is also described demonstrating the versatility of the γ-alkylidenebutenolide building block.     

Detection and Evaluation of Normal and Malignant Cells Using Laser-Induced Fluorescence Spectroscopy

The aim of this research is to study the normalized fluorescence spectra (intensity variations and area under the fluorescence signal), relative quantum yield, extinction coefficient and intracellular properties of normal and malignant human bone cells. Using Laser-Induced Fluorescence Spectroscopy (LIFS) upon excitation of 405 nm, the comparison of emission spectra of bone cells revealed that fluorescence intensity and the area under the spectra of malignant bone cells was less than that of normal. In addition, the area ratio and shape factor were changed. We obtained two emission bands in spectra of normal cells centered at about 486 and 575 nm and for malignant cells about 482 and 586 nm respectively, which are most likely attributed to NADH and riboflavins. Using fluorescein sodium emission spectrum, the relative quantum yield of bone cells is numerically determined.     

Furoquinoline alkaloids from Melicope bonwickii (F.Muell.) T.Hartley

Investigation on the leaves of Melicope bonwickii (F.Muell.) T.Hartley (Rutaceae) afforded a new 7-(2'-hydroxy-3'-chloroprenyloxy)-4-methoxyfuroquinoline (1) together with the known 7-(2',3'-epoxyprenyloxy)-4-methoxyfuroquinoline (2), evellerine (3) kokusaginine (4) and an amide aurantiamide acetate (5). Compounds 1 and 2 showed significant activity against cervical cell lines (Hela).