Brownian motion and thermophoresis effects on unsteady stagnation point flow of Eyring-Powell nanofluid: a Galerkin approach

This article concerns the analysis of an unsteady stagnation point flow of Eyring-Powell nanofluid over a stretching sheet. The influence of thermophoresis and Brownian motion is also considered in transport equations. The nonlinear ODE set is obtained from the governing nonlinear equations via suitable transformations. The numerical experiments are performed using the Galerkin scheme. A tabular form comparison analysis of outcomes attained via the Galerkin approach and numerical scheme (RK-4) is available to show the credibility of the Galerkin method. The numerical exploration is carried out for various governing parameters, namely, Brownian motion, steadiness, thermophoresis, stretching ratio, velocity slip, concentration slip, thermal slip, and fluid parameters, and Hartmann, Prandtl and Schmidt numbers. The velocity of fluid enhances with an increase in fluid and magnetic parameters for the case of opposing, but the behavior is reversed for assisting cases. The Brownian motion and thermophoresis parameters cause an increase in temperature for both cases (assisting and opposing). The Brownian motion parameter provides a drop-in concentration while an increase is noticed for the thermophoresis parameter. All the outcomes and the behavior of emerging parameters are illustrated graphically. The comparison analysis and graphical plots endorse the appropriateness of the Galerkin method. It is concluded that said method could be extended to other problems of a complex nature.     

Synthesis, structural and magnetic properties of the nanocomposite Fe63B23Nd7Y3Nb3Cr1 magnets

The Fe₆₃B₂₃Nd₇Y₃Nb₃Cr₁ nanocomposite magnets in the form of sheets have been prepared by copper mold casting technique. The phase evolution, crystal structure, microstructural and magnetic properties have been investigated in the as-cast and annealed states. The as-cast sheets show magnetically soft behaviors which become magnetically hard by thermal annealing. The optimal annealed microstructure was composed of nanosize soft magnetic α-Fe (19-29 nm) and hard magnetic Nd₂Fe₁₄B (45-55 nm) grains. The best hard magnetic properties such as intrinsic coercivity, _jH_c of 1119 kA/m, remanence, B_r of 0.44 T, magnetic induction to saturation magnetization ratio, M_r/M_s=0.61 and maximum energy product, (BH)_max of 55 kJ/m³ was obtained after annealing at 680 °C for 15 min. The annealing treatment above 680 °C results in non-ideal phase grains growth, which degrade the magnetic properties.     

Radiobiokinetic evaluation of domestic cold kits

Domestically produced diagnostic cold kits, viz. glucoheptonate (GH), diisopropyliminodiacetic acid (DISIDA), dimercaptosuccinic acid (DMSA), diethylenetriamine-pentaacetic acid (DTPA), methylenediphosphonate (MDP) and Sn-colloid were labeled with^99mTc and their in-vivo distribution in experimental animals (rats) was evaluated prior to use in humans for diagnostic scanning. The biodistribution pattern was found in accordance with the latest guidelines of the International Atomic Energy Agency (IAEA), which serve as a standard for small scale producers.     

Synthesis,Structures, and Molecular Docking of Some Bioactive Benzamide Derivatives as Ionic Solids

Russian Journal of General Chemistry - Five new substituted benzamide derivatives as ionic solids are prepared and characterized by FT-IR, 1H, and 13C NMR spectroscopy. The crystal structure for...     

Conduction of heat in a semi-infinite solid with an exponential-type initial temperature profile: temperature and heat flux solutions due to an instantaneous laser source

A closed-form model for the computation of temperature and heat-flux distribution in a semi-infinite solid with an exponentially-decaying, initial-temperature profile is investigated. The solutions are presented for the case of an instantaneous laser source which is absorbed partially in the surface layers followed by an exponential decay with position in the material itself. The appropriate dimensionless parameters are identified and the reduced temperature and heat flux solutions are presented in the graphic form as a function of these parameters. Some limiting cases of practical interest are also discussed. It is demonstrated that the present analysis covers the classical case of no heat generation in the solid as well as some new solutions.     

Poly(vinyl alcohol)/GO-MMT nanocomposites: Preparation,structure and properties

A facile, efficient and environment friendly method is established to prepare poly(vinyl alcohol)(PVA) based graphene oxide-montmorillonite(GO-MMT) nanocomposites in aqueous media. GO-MMT nanohybrid is obtained by the combination of GO and MMT in water without any reducing or stabilizing agents. The formation of GO-MMT nanohybrid is due to the hydrogen bonding and crosslinking effects. The sodium ions within MMT sheets act as crosslinkers between GO sheets and MMT platelets. The resultant nanocomposites are characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and mechanical testing. Compared to that of pure PVA, PVA nanocomposites show enhanced thermal stabilities and mechanical properties, which results from strong interfacial adhesion of the nanoadditives in PVA matrix. The further increase in the tensile strength and modulus results from strong interaction between PVA chains and layered GO-MMT as well as good mechanical properties of GO-MMT hybrid, compared to PVA/GO and PVA/MMT nanocompsoites.     

New eco-friendly low-cost binders for Li-ion anodes

In the production of commercial Li-ion batteries, the active materials slurries are generally prepared using polyvinylidene fluoride (PVdF) as binder because of its good adhesion properties and electrochemical stability. Unfortunately, there are some disadvantages related to the use of PVdF: the most important is the use of toxic and environmentally unfriendly solvents, such as N-methyl-pyrrolidone (NMP), and the second is the high costs. In the light of these considerations, it seemed straightforward to investigate the suitability of some water-soluble, inexpensive, and eco-friendly materials to test as alternative binders (sodium alginate, chitosan tragacanth gum, gelatin). The rheological properties of these materials have been investigated in addition to the electrochemical characterization. Furthermore, graphite electrodes with PVdF, carboxymethyl cellulose (CMC), and styrene-butadiene rubber (SBR) binders have been considered for sake of comparison. We found that some of these water-soluble binders, besides good electrochemical performances, showed a high adhesion to the current collector and a good electrochemical stability under the experimental conditions employed, which makes them interesting for the next generation of Li-ion batteries.     

Embeddings on a boolean cube

In this paper, we characterize a class of graphs which can be embedded on a boolean cube. Some of the graphs in this class are identified with the well known graphs such asmulti-dimensional mesh of trees, tree of meshes, etc. We suggest (i) an embedding of anr-dimensional mesh of trees ofn ^r (r+1)–rn ^r–1 nodes on a boolean cube of (2n) ^r nodes, and (ii) an embedding of a tree of meshes with 2n ² logn+n ² nodes on a boolean cube withn ² exp₂ (log (2 logn+1)]) nodes.     

Fouling resistance model for prediction of CaCO3 scaling in AISI 316 tubes

The term fouling is generally used to describe the deposition of unwanted (initially fluid) particles, which increases both resistance to heat transfer and pressure drop through the heat exchanger. CaCO₃ which is predominantly present in the cooling water, has inverse solubility characteristics i.e., it is less soluble in warm water, resulting in deposition of scales in heat transfer equipment. An experimental program is described in this paper to study the growth of fouling as a function of tube surface temperature, Reynolds number, tube diameter and the time for which the tube has been subjected to the scale forming solution. The data collected from the experiments are used to develop a fouling resistance model. In addition, the results obtained from the present study are also compared with those discussed earlier by several investigators with regard to CaCO₃ fouling.     

Applications of magnetic materials separation in biological nanomedicine

As a result of their advantages for superparamagnetic properties, good biocompatibility, and high binding capacity, functionalized magnetic materials became widely popular over the past couple of decades, being applied on large scale in various processes of sample preparation for biomedicine. In this work, we perform an in‐depth review on the current progress in the field of magnetic bead separation, discussing in detail the physical basis of this process, various synthesis methods and surface modification strategies. We place special focus of attention as well on the latest applications of magnetic polymer microspheres in cell separation, protein purification, immobilized enzyme, nucleic acid separation, and extraction of bioactive compounds with low molecular weight. Existing problems are highlighted and possible trends of magnetic separation techniques for biomedicine in the future are proposed.