Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Paramagnetic ruthenium(III) cyclometallated complex. Synthesis, spectroscopic studies and electron-transfer properties

The reaction of Ru^II(PPh₃)₃X₂ (X = Cl, Br) with o-(OH)C₆H₄C(H)=N-CH₂C₆H₅ (HL) under aerobic conditions affords Ru^II(L)₂(PPh₃)₂, 1, in which both the ligands (L) are bound to the metal center at the phenolic oxygen (deprotonated) and azomethine nitrogen and Ru^III(L¹)(L²)(PPh₃), 2, in which one L is in bidentate N,O form like in complex 1 and the other ligand is in tridentate C,N,O mode where cyclometallation takes place from the ortho carbon atom (deprotonated) of the benzyl amine fragment. The complex 1 is unstable in solution, and undergoes spontaneous oxidative internal transformation to complex 2. In solid state upon heating, 1 initially converts to 2 quantitatively and further heating causes the rearrangement of complex 2 to the stable RuL₃ complex. The presence of symmetry in the diamagnetic, electrically neutral complex 1 is confirmed by ¹H and ³¹P NMR spectroscopy. It exhibits an Ru^II → L, MLCT transition at 460 nm and a ligand based transition at 340 nm. The complex 1 undergoes quasi-reversible ruthenium(II)—ruthenium(III) oxidation at 1.27V vs. SCE. The one-electron paramagnetic cyclometallated ruthenium(III) complex 2 displays an L → Ru^III, LMCT transition at 658 nm. The ligand based transition is observed to take place at 343 nm. The complex 2 shows reversible ruthenium(III)—ruthenium(IV) oxidation at 0.875V and irreversible ruthenium(III)—ruthenium(II) reduction at −0.68V vs. SCE. It exhibits a rhombic EPR spectrum, that has been analysed to furnish values of axial (6560 cm⁻¹) and rhombic (5630 cm⁻¹) distortion parameters as well as the energies of the two expected ligand field transitions (3877 cm⁻¹ and 9540 cm⁻¹) within the t₂ shell. One of the transitions has been experimentally observed in the predicted region (9090 cm⁻¹). The first order rate constants at different temperatures and the activation parameter ΔH^#/ΔS^# values of the conversion process of 1 → 2 have been determined spectrophotometrically in chloroform solution.     

Does CH prefer a C2v rather than a Cs structure?

The closely related C_s ( 1 ) and C_2v ( 3 ) structures of CH have been reinvestigated at many ab initio levels using MP2/6-31G** and MP2/6-311 + + G(2df, 2pd) geometries. The largest basis sets employed were 6-311G(3df, 2p), 6-311 + + G(3df, 3pd), and the Dunning “correlation consistent” polarized triple-split valence basis set (cc-pVTZ). Electron correlation was probed at the MP4 level, but the QCISD method was also used with the largest basis sets. While electron correlation favors 3 over 1 by about 2 kcal/mol, the correlated relative energies with all basis sets employed range from 0.36–1.03 kcal/mol in favor of 1 . The best estimate of this difference, 0.86 kcal/mol, is essentially identical with the (scaled) zero-point energy difference, 0.84 kcal/mol, favoring 3 over 1 . These results indicate that 1 and 3 have almost exactly the same energy at 0 K. Our best value for the dissociation energy of CH is 42.0 kcal/mol [QCISD(T)/6-311 + + G(3df, 3pd)//MP2(fu)/6-311 + + G(2df, 2pd), corrected to 298 K], which agrees very well with the experimental value. © 1992 by John Wiley & Sons, Inc.     

An Ultra-Microporous Metal–Organic Framework with Exceptional Xe Capacity

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal–organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni–MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO₂. Further ¹²⁹Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.     

Nano-alumina by gel combustion, its thermal characterization and slurry-based coating on stainless steel surface

Gel combustion method was used to prepare nano-alumina from aluminum nitrate and stoichiometric amount of glycine as fuel. The TG–DTA pattern of the as-prepared powder (combustion product) exhibited exotherms with peaks around 500 and 900 °C accompanied with loss of weight of 25 and 5 % attributed to burning away of carbon left behind and decomposition of residual reaction intermediates left behind, respectively. Even though mass stability is attained above 900 °C, the DTA exhibited an exotherm around 1,150 °C attributed to transformation of gamma to alpha form of alumina. The XRD studies revealed that the powder heated to 900 °C was chemically pure nano-crystalline alumina while that heated above 1,150 °C was crystalline alpha form. As nano-crystalline powders are sinter-active, the nano-crystalline alumina formed by calcination at 900 °C was used to form the coating. A morphological feature of the agglomerates of nano-alumina powders were evaluated using SEM. The powder was de-agglomerated by wet grinding method. The dispersion conditions to form slurry using 900 °C calcined powder for slurry-based coating was optimized using zeta-potential studies, and it was found to exhibit a maximum value of ?45 mV at a pH of 9. After 8 h of grinding, the median agglomerate size reduced to 2 μm. Rheological studies exhibited desired pseudoplastic behavior in the range of 10–20 vol.% of solid while the slurry with 15 vol.% only form crack free, dense, and adherent coating after heat treatment at 1,150 °C. The morphology of the coating was found to be uniform and dense.     

Early detection of viral DNA in breast cancer using fingered aluminium interdigitated electrode modified by Streptavidin-biotin tetravalent complex

Human Mammary Tumor Virus (HMTV) or Mouse Mammary Tumor Virus holds similarity as an endogenous onco-retrovirus belongs to retroviridae family, predominantly infects the epithelial cell of human as well as mouse. With the recognition of nano-biosensor in nanotechnology, ideal interdigitated electrode (IDE) was genuinely performed for HMTV detection. Aluminium enriched IDE (AlIDE) was fabricated for high performance detection with a cost-effective photolithography technique. In this research, (3-glycidyloxypropyl) trimethoxysilane refined platform was selected to detect the conductivity with HMTV target DNA interaction on the designed AlIDE. Strong binding affinity of streptavidin-biotin with target DNA enhanced the sensitivity by empowering higher number of HMTV probe and target complementation on sensing surface. Furthermore, the target DNA was immobilized on probe modified AlIDE and a quantitative value of 100 aM attained as a lowest detection. A linear with dose-dependent duplex formation was shown with the regression coefficient value of 0.964. Negative control has shown insignificant detection at 10 pM, which justifies the higher fold discrimination with specificity. The excellence of AlIDE performance in detection of HMTV may pave the way for more verification on other diseases.     

Metal‐Free Triplet Phosphors with High Emission Efficiency and High Tunability

Design of highly efficient phosphorescent emitters based on metal‐ and heavy atom‐free boron compounds has been demonstrated by taking advantage of the singlet fission process. The combination of a suitable molecular scaffold and appropriate electronic nature of the substituents has been utilized to tailor the phosphorescence emission properties in solution, neat solid, and in doped PMMA thin films.     

Electrospray ionization mass spectrometric study of encapsulation of amino acids by cyclodextrins

Electrospray ionization (ESI) mass spectrometry has been used to study inclusion (host-guest) complexes of cyclodextrins (CDs) with amino acids. Host-guest complexes formed in solution are stable for characterization by ESI mass spectrometry: The relative abundances and the stoichiometry of the complexes formed in solution can, thus, be determined in the gas phase. The studies verified that β- and γ-cyclodextrin better accommodate protonated amino acids than α-cyclodextrin, and that chemically modified cyclodextrins such as heptakis(2,6-di-O-methyl)-β-cyclodextrin (DM-β-CD) may show profound improvement in complexation. The preferential formation of DM-β-CD-aromatic amino acid over DM-β-CD-aliphatic amino acid complexes is confirmed by the experiments, and the relative gas-phase stabilities determined by repeller-collimator collision-induced dissociation show an identical trend to the complexation in solution. Although molecular mechanics studies also may predict the encapsulation preference of protonated amino acids by cyclodextrins, only small differences in the total complexation energies are obtained because of the inability of the calculations to consider hydrophobic interactions. An experimental approach based on ESI mass spectrometry is, therefore, more reliable in predicting host-guest interactions that involve cyclodextrins and amino acids than the theoretical calculations that employ molecular mechanics models.     

Concurrent determination of olanzapine,risperidone and 9‐hydroxyrisperidone in human plasma by ultra performance liquid chromatography with diode array detection method: application to pharmacokinetic study

A simple and sensitive ultra‐performance liquid chromatography (UPLC) method has been developed and validated for simultaneous estimation of olanzapine (OLZ), risperidone (RIS) and 9‐hydroxyrisperidone (9‐OHRIS) in human plasma in vitro. The sample preparation was performed by simple liquid–liquid extraction technique. The analytes were chromatographed on a Waters Acquity H class UPLC system using isocratic mobile phase conditions at a flow rate of 0.3 mL/min and Acquity UPLC BEH shield RP₁₈ column maintained at 40°C. Quantification was performed on a photodiode array detector set at 277 nm and clozapine was used as internal standard (IS). OLZ, RIS, 9‐OHRIS and IS retention times were found to be 0.9, 1.4, .1.8 and 3.1 min, respectively, and the total run time was 4 min. The method was validated for selectivity, specificity, recovery, linearity, accuracy, precision and sample stability. The calibration curve was linear over the concentration range 1–100 ng/mL for OLZ, RIS and 9‐OHRIS. Intra‐ and inter‐day precisions for OLZ, RIS and 9‐OHRIS were found to be good with the coefficient of variation <6.96%, and the accuracy ranging from 97.55 to 105.41%, in human plasma. The validated UPLC method was successfully applied to the pharmacokinetic study of RIS and 9‐OHRIS in human plasma. Copyright © 2015 John Wiley & Sons, Ltd.