Complexometric determination of thallium(III) in pure solution,alloys, and complexes using semicarbazide hydrochloride as a releasing agent

A simple and accurate complexometric method is proposed for the determination of Tl(III) using semicarbazide hydrochloride as a releasing agent. In the presence of diverse metal ions, thallium is complexed first with a known excess of EDTA, and the surplus EDTA is then titrated with standard zinc sulfate at pH 5.0–6.0 (hexamine) using xylenol orange indicator. An excess of 5% aqueous neutral solution of semicarbazide hydrochloride is then added and the released EDTA is titrated against standard zinc sulfate solution. The method works well in the range 2–50 mg of Tl(III) with relative errors < 0.5%, standard deviations 0.05mg and coefficient of variation 0.4%. The method is applied for the determination of thallium content in complexes and alloy compositions     

A study of biodegradation of polyethylene and biodesulfurization of rubber

Applied Biochemistry and Biotechnology - The present study provides preliminary data on the involvement of such microorganisms asAspergillus niger in the biodegradation of commercially available...     

Liquid Phase Regioselective Bromination of Aromatic Compounds Over Hzsm-5 Catalyst

A simple, efficient, regioselective and environmentally safe method for oxybromination of activated aromatics catalyzed by HZSM-5 is reported. The electrophilic substitution of bromine generated from KBr using HZSM-5 as a catalyst and H₂O₂ as an oxidant.     

An efficient metal catalyst free approach to synthesize 5-(4-(1,2,4,5 tetrazin-3-yl)benzylamino)-5-oxopentanoic acid

Despite the wide use of 1,2,4,5- tetrazines in biomaterials and materials science, currently there does not exist synthetic method(s) that can yield significant amount of 1,2,4,5- tetrazines without the use of potentially toxic metal catalysts. Here, we report a less energy intensive and more efficient metal catalyst free approach for the synthesis of an asymmetric tetrazine. A range of operating parameters such as extraction pH and temperature were regulated to achieve a practical yield nearly 1.5 times greater than the yields reported in the literature for similar synthetic procedures.     

Selectivity switch in transformation of CO2 from ethanol to methanol on Cu embedded in the defect carbon

The copper-based catalysts have been generally regarded as high-performance catalysts for CO_2 hydrogenation toward methanol,while the production of ethanol via C–C coupling on the copper-based catalysts is still challenging. Herein, we report a new catalyst where Cu nanoparticles are embedded in the carbon support with abundant defect sites, achieving a high selectivity for ethanol in the CO_2 hydrogenation. The experiments coupled with the theoretical studies show a clear map where carbon defects serve as anchor sites that can stabilize interfacial copper species, and interfacial Cu sites with low coordination numbers can adsorb two C_1 species and later convert them to a C_2 species via a hydrogenation-induced coupling reaction. Further adjacent Cu atoms of interfacial Cu sites can facilitate OH reduction reactions via the Cu–Cu bridge adsorption to assist the formation of ethanol. Especially, those specific active sites easily disappear in the reducing conditions and during the reaction, the major product can transform from ethanol to methanol.     

Structural and electrical properties of chemical solution deposited (Bi0.9Tb0.1)(Fe0.975 TM 0.025)O3±δ (TM = Ni, Mn and Ti) thin films

Effects of Tb and transition metal (TM = Ni, Mn and Ti) ions co-doping on the structural, electrical and ferroelectric properties of the BiFeO₃ thin films prepared by using a chemical solution deposition method were reported. From X-ray diffraction and Raman scattering analyses, distorted rhombohedral perovskite structures were observed for all thin films. Improved electrical and ferroelectric properties were observed for the co-doped thin films. Among the thin films, the lowest leakage current density of 2.67 × 10^?6 A/cm² (at 100 kV/cm), large remnant polarization (2P _r ) of 82.2 μC/cm² and low coercive field (2E_c) of 680 kV/cm (at 1,036 kV/cm) were measured for the (Tb, Mn) co-doped thin film.     

Gravity-free hydraulic jumps and metal femtoliter cups

Hydraulic jumps created by gravity are seen everyday in the kitchen sink. We show that at small scales a circular hydraulic jump can be created in the absence of gravity by surface tension. The theory is motivated by our experimental finding of a height discontinuity in spreading submicron molten metal droplets created by pulsed-laser ablation. By careful control of initial conditions, this leads to solid femtoliter cups of gold, silver, copper, niobium, and tin.     

离子选择电极阵列土壤中硝态氮测定

土壤硝态氮反映土壤短期氮素供应水平,实时了解土壤硝态氮的含量为精准农业和农业面源污染防控提供支撑,因此,在线实时检测土壤硝态氮方法突破就显得十分迫切。土壤硝态氮中的硝酸根离子在土壤中的高水溶性和流动性为全固态硝酸根离子选择电极高敏感检测土壤中硝态氮提供了条件,固态硝态氮离子选择电极的离子选择膜反应硝酸根离子在被测溶液中的浓度。采用全固态硝酸根离子选择电极,且与温度电极和pH电极融合组成电极阵列对土壤饱和溶液中的硝态根离子进行检测。设计了高输入阻抗运算放大电路对电极信号进行采集,并通过微处理控制蠕动泵完成土壤硝态氮待测溶液连续流动测量及实时传输结果。实验结果表明,电极响应时间≤15 s,斜率-51.63 mV/decade,线性范围10-5-10-2.2 mol/L,最低检测限10-5.23 mol/L。相对标准差在0.78%-4.47%范围内,加标回收率均在90%-110%以内。与国家标准紫外可见分光光度法测试结果相比,相关系数（R2）为0.9952,为土壤硝态氮在现场检测奠定技术基础。     

Studies on the thermal properties of silicone polymer based thermal protection systems for space applications

Journal of Thermal Analysis and Calorimetry - Thermal decomposition, thermal conductivity, specific heat and flammability of polydimethyl siloxane (PDMS) resin and three PDMS-based systems with...