Synthesis and Reactions of Some Heterocyclic Candidates Based on 2‐Amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene Moiety as Anti‐Arrhythmic Agents

In continuation of our previous work, a series of novel thiophene derivatives 4 , 5 , 6 , 8 , 9 , 9a , 9b , 9c , 9d , 9e , 10 , 10a , 10b , 10c , 10d , 10e , 11 , 12 , 13 , 14 , 15 , 16 were synthesized by the reaction of ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate ( 1 ) or 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile ( 2 ) with different organic reagents. Fusion of 1 with ethylcyanoacetate or maleic anhydride afforded the corresponding thienooxazinone derivative 4 and N‐thienylmalimide derivative 5 , respectively. Acylation of 1 with chloroacetylchloride afforded the amide 6 , which was cyclized with ammonium thiocyanate to give the corresponding N‐theinylthiazole derivative 8 . On the other hand, reaction of 1 with substituted aroylisothiocyanate derivatives gave the corresponding thiourea derivatives 9a , 9b , 9c , 9d , 9e , which were cyclized by the action of sodium ethoxide to afford the corresponding N‐substituted thiopyrimidine derivatives 10a , 10b , 10c , 10d , 10e . Condensation of 2 with acid anhydrides in refluxing acetic acid afforded the corresponding imide carbonitrile derivatives 11 , 12 , 13 . Similarly, condensation of 1 with the previous acid anhydride yielded the corresponding imide ethyl ester derivatives 14 , 15 , 16 , respectively. The structures of newly synthesized compounds were confirmed by IR, ¹H NMR, ¹³C NMR, MS spectral data, and elemental analysis. The detailed synthesis, spectroscopic data, LD₅₀, and pharmacological activities of the synthesized compounds are reported.     

A Dual Read-out Molecularly Imprinted Composite Membrane Sensor Based on Zinc Porphyrin for the Detection of Dimethyl Methylphosphonate

Molecularly imprinted membrane-zinc porphyrin-mathacrylate(MIM-Zn-MAA), a dual read-out sensor based on a molecularly imprinted membrane, was developed to recognize and detect dimethyl methylphosphonate (DMMP) as an intermediate molecule of organophosphorus pesticides. The membranes were prepared via thermal polymerization of two functional monomers(zinc porphyrin and mathacrylate) on the surface of a glass slide functionalized with ethylene glycol dimethacrylate and azobisisobutyronitrile. The morphology of the as-synthesized MIM-Zn-MAA was determined with scanning electronic microscopy. The composite membranes exhibited macrovoid morphologies, which were affected by the functional monomers. These membranes were selectively adsorbed onto the template molecule and displayed higher adsorbing capacity toward DMMP compared with their structural analogs. Changes in the fluorescent spectra were qualitatively and quantitatively monitored via fluorescence photometry. Difference maps were also obtained using colorimetry before and after the reaction between MIM-Zn-MAA and DMMP at various concentrations. The maps showed a wide linear range varying from 0.1 μmol/L to 10 mmol/L with a low detection limit of 0.1 μmol/L. These preliminary results demonstrate that the as-fabricated dual read-out sensor displays good sensitivity and selectivity toward DMMP, indicating its considerable potential in DMMP detection in practical applications.     

Microwaves in organic synthesis: Facile synthesis of biologically active pyridazinone and iminopyridazine derivatives

Condensation of Wittig reagents 1a,b with arylhydrazones 2a,b by conventional and by microwave heating techniques furnished the corresponding pyridazines 3a‐e . The arylhydrazones 7a,b were allowed to react with 1a,b under the same conditions to produce the pyridazinones 10a,b and iminopyridazines 11a,b respectively. On the other hand, the arylhydrazones 12a‐c reacted with 1a to afford the pyridazinones 13a‐c . Treatment of 3b with dimethylformamide dimethyl acetal (DMFDMA) produced the adduct 15 . The utility of microwave heating technique led to the reduction of the reaction times to few minutes and to the improvement of the yields of the products. The in vitro biological activity of some newly prepared compounds against four types of fungi was studied.     

Synthesis of Some Novel Benzylidenehydantoins: Amino Acids Derivatives

5-Benzylidenehydantoin reacts with chlorosulfonic acid to give the corresponding p-sulfonyl chloride. Condensation of the latter with amino acids leads to sulfonylamino acid derivatives, which on coupling with glycine methyl ester hydrochloride in THF-Et₃N using the dicyclohexylcarbodiimide method furnish the desired dipeptide methyl esters. The spectral data of the compounds are briefly discussed.     

Bifurcation analysis of nonlinear and supernonlinear dust–acoustic waves in a dusty plasma using the generalized (r,q) distribution function for ions and electrons

Bifurcation analysis of dust acoustic (DA) periodic waves in three components, unmagnetized dusty plasma system is investigated using the generalized (r, q) distribution function for ions and electrons. Depending on the different parameters of the system considered, all possible phase portraits, including periodic, homoclinic, superperiodic, and superhomoclinic trajectories, are presented. The existence of rarefactive and compressive solitary waves is proved. Also, the plasma system under consideration supports both nonlinear and supernonlinear DA periodic waves. It has been found that the double spectral indices r and q play a decisive effect on the bifurcation of the waves.     

Microporous Activated Carbon from Pisum sativum Pods Using Various Activation Methods and Tested for Adsorption of Acid Orange 7 Dye from Water

Highlights

• •Pisum sativum pods was used for producing porous activated carbon materials.
• •Two chemical methods and two gases were used in the activation processes.
• •Higher performances were achieved by applying ZnCl₂ and CO₂ for activation.
• •The products exhibited large surface areas and high AO7 dye adsorption performances.
• •RMS study of the AO7 dye removal by produced material was reported.

AbstractThis work demonstrates the preparation of high-surface-area activated carbon (AC) from Pisum sativum pods using ZnCl₂ and KOH as activating agents. The influence of CO₂ and N₂ gases during the carbonization process on the porosity of AC were studied. The highest specific surface area of AC was estimated at 1300 to 1500 m²/g, which presented characteristics of microporous materials. SEM micrographs revealed that chemical activation using an impregnation reagent ZnCl₂ increases the porosity of the AC, which in turn leads to an increase in the surface area, and the SEM image showed that particle size diameter ranged between 48.88 and 69.95 nm. The performance of prepared AC for adsorption of Acid Orange 7 (AO7) dye was tested. The results showed that the adsorption percentage by AC (2.5 g/L) was equal to 94.76% after just 15 min, and the percentage of removal increased to be ~100% after 60 min. The maximum adsorption capacity was 473.93 mg g⁻¹. A Langmuir model (LM) shows the best-fitted equilibrium isotherm, and the kinetic data fitted better to the pseudo-second-order and Film diffusion models. The removal of AO7 dye using AC from Pisum sativum pods was optimized using a response factor model (RSM), and the results were reported.     

Semi-classical transport for predicting joule heating in carbon nanotubes

A method for predicting the joule heating using Monte Carlo simulation for the electron dynamics is proposed. The joule heating in (10,10) carbon nanotubes is computed. The full energy band is utilized; however the results show that for low temperatures only the lower subband is sufficient, while for temperatures above 900 K, it is important to include all the subbands. Results are compared with a quantum mechanical integral form which uses an approximation for the electron occupation probability. There is a quantitative agreement of the results; however saturation of the heat generated observed in the integral form is not observed.     

Investigation the Effects of Green-Synthesized Copper Nanoparticles on the Performance of Activated Carbon-Chitosan-Alginate for the Removal of Cr(VI) from Aqueous Solution

In the present investigation, green nano-zerovalent copper (GnZVCu), activated carbon (AC), chitosan (CS) and alginate (ALG) nanocomposites were produced and used for the elimination of chromium (VI) from a polluted solution. The nanocomposites GnZVCu/AC-CS-alginate and AC-CS-alginate were prepared. Analysis and characterization were performed by the following techniques: X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The SEM analysis revealed that the nanocomposites are extremely mesoporous, which leads to the greatest adsorption of Cr⁺⁶ (i.e., 97.5% and 95%) for GnZVCu/AC-CS-alginate and AC-CS-alginate, respectively. The adsorption efficiency was enhanced by coupling GnZVCu with AC-CS-alginate with a contact time of 40 min. The maximum elimination of Cr⁺⁶ with the two nanocomposites was achieved at pH 2. The isotherm model, Freundlich adsorption isotherm and kinetics model and P.S.O.R kinetic models were discovered to be better suited to describe the exclusion of Cr⁺⁶ by the nanocomposites. The results suggested that the synthesized nanocomposites are promising for the segregation of Cr⁺⁶ from polluted solutions, specially the GnZVCu/AC-CS-alginate nanocomposite.     

Atomic absorption spectroscopic, conductometric and colorimetric methods for determination of fluoroquinolone antibiotics using ammonium reineckate ion-pair complex formation

Three accurate, rapid and simple atomic absorption spectrometric, conductometric and colorimetric methods were developed for the determination of norfloxacin (NRF), ciprofloxacin (CIP), ofloxacin (OFL) and enrofloxacin (ENF). The proposed methods depend upon the reaction of ammonium reineckate with the studied drugs to form stable precipitate of ion-pair complexes, which was dissolved in acetone. The pink coloured complexes were determined either by AAS or colorimetrically at lambdmax 525 nm directly using the dissolved complex. Using conductometric titration, the studied drugs could be evaluated in 50% (v/v) acetone in the range 5.0-65, 4.0-48, 5.0-56 and 6.0-72 microg ml-1 of NRF, CPF, OFL and ENF, respectively. The optimizations of various experimental conditions were described. The results obtained showed good recoveries of 99.15 +/- 1.15, 99.30 +/- 1.40, 99.60 +/- 1.50, and 99.00 +/- 1.25% with relative standard deviations of 0.81, 1.06, 0.97, and 0.69% for NRF, CPF, OFL, and ENF, respectively. Applications of the proposed methods to representative pharmaceutical formulations are successfully presented.