H2CCF自由基与HNCO反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋＋G(d,p)基组水平上研究了H₂CCF自由基与HNCO的微观反应机理, 优化了反应过程中的反应物、中间体、过渡态和产物, 为了获得更精确的能量信息, 还在QCISD(T)/6-311＋＋G(d,p)基组水平上计算了各物质的能量．振动分析结果和IRC分析结果证实了中间体和过渡态的真实性, 计算所得的成键临界点电荷密度的变化也确认了反应过程．对于H₂CCF自由基与HNCO反应, 我们找到了六条可行的反应通道, 结果分析表明通道H₂CCF＋HNCO→IM3→TS5→H₂CCFH＋NCO控制步骤活化能最低, 是该反应的主要通道, 在此反应过程中有稳定的氢键复合物IM3生成, 还表现出氢原子迁移的反应特征．     

Thermodynamic and kinetic data for adduct formation, cis-trans isomerization and redox reactions of ML4 complexes: a case study with rhodium- and iridium-tropp complexes in d8, d9 and d10 valence electron configurations (tropp=dibenzotropylidene phosphanes)

The formation of adducts of the square-planar 16-electron complexes trans-[M(tropp(ph))(2)](+) and cis-[M(tropp(ph))(2)](+) (M=Rh, Ir; tropp(Ph)=5-diphenylphosphanyldibenzo[a,d]cycloheptene) with acetonitrile (acn) and Cl(-), and the redox chemistry of these complexes was investigated by various physical methods (NMR and UV-visible spectroscopy, square-wave voltammetry), in order to obtain some fundamental thermodynamic and kinetic data for these systems. A trans/cis isomerization cannot be detected for [M(tropp(ph))(2)](+) in non-coordinating solvents. However, both isomers are connected through equilibria of the type trans-[M(tropp(ph))(2)](+)+L<==>[ML(tropp(ph))(2)](n)<==>cis-[M(tropp(ph))(2)](+)+L, involving five-coordinate intermediates [ML(tropp(ph))(2)](n) (L=acn, n=+1; L=Cl(-), n=0). Values for K(d) (K(f)), that is, the dissociation (formation) equilibrium constant, and k(d) (k(f)), that is, the dissociation (formation) rate constant, were obtained. The formation reactions are fast, especially with the trans isomers (k(f)>1x10(5) m(-1) s(-1)). The reaction with the sterically more hindered cis isomers is at least one order of magnitude slower. The stability of the five-coordinate complexes [ML(tropp(ph))(2)](n) increases with Ir>Rh and Cl(-)>acn. The dissociation reaction has a pronounced influence on the square-wave (SW) voltammograms of trans/cis-[Ir(tropp(ph))(2)](+). With the help of the thermodynamic and kinetic data independently determined by other physical means, these reactions could be simulated and allowed the setting up of a reaction sequence. Examination of the data obtained showed that the trans/cis isomerization is a process with a low activation barrier for the four-coordinate 17-electron complexes [M(tropp(ph))(2)](0) and especially that a disproportionation reaction 2 trans/cis-[M(tropp(ph))(2)](0)-->[M(tropp(ph))(2)](+)+[M(tropp(ph))(2)](-) may be sufficiently fast to mask the true reactivity of the paramagnetic species, which are probably less reactive than their diamagnetic equilibrium partners.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Singlet-triplet interconversion of diphenylmethylene. Energetics,dynamics and reactivities of different spin states

A combination of picosecond and nanosecond laser spectroscopy measurements, chemical quenching experiments and triplet sensitization experiments has allowed the determination of the rapid singlet to triplet and slower triplet to singlet intersystem crossing rates for diphenylmethylene in fluid solution at room temperature. It is shown that under the conditions of the kinetic measurements, singlet and triplet diphenylmethylene (¹DPM and ³DPM, respectively) are in rapid equilibrium relative to reactions, so that knowledge of the values of k_ST and k_TS allows determination of the equilibrium constant and change in free energy for the ¹DPM 〈 ³DPM process. The absolute reactivity of ¹DPM toward a series of alcohols has been determined and is discussed in terms of other current investigations of carbene reactivity.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

PMR-Spektren einiger Alkoxy-9-chlor-6-nitroacridine

The spectra of some 9-chloro-6-nitroacridines with methoxy substituents in position 1,4; 2,4; 3,4; 2,3; and ethoxy substituents in positions 1, 2, 3, were recorded. The influence of electron releasing alkoxy groups and electron withdrawing nitro groups on chemical shifts of protons in the 9-chloroacridinic cycle was discussed and PMR parameters were determined, comparatively with those of acridine and 9-chloroacridine. Good agreement between calculated and experimental values is observed. The spectrum of 9-chloro-1,2,3-triethoxyacridine shows for the four protons of the ringC. (H-5, H-6, H-7, H-8) anAMNX coupling pattern whose parameters were determined.     

The de novo design of median molecules within a property range of interest

Summary In this paper an application is presented of the median molecule workflow to the de novo design of novel molecular entities with a property profile of interest. Median molecules are structures that are optimised to be similar to a set of existing molecules of interest as an approach for lead exploration and hopping. An overview of this workflow is provided together with an example of an instance using the similarity to camphor and menthol as objectives. The methodology of the experiments is defined and the workflow is applied to designing novel molecules for two physical property datasets: mean molecular polarisability and aqueous solubility. This paper concludes with a discussion of the characteristics of this method.     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

The iron phosphate K3Fe5(PO4)6

The crystal structure of tripotassium pentairon hexaphosphate has been determined by single‐crystal X‐ray diffraction. The structure contains one Fe atom on a center of symmetry, one K, two Fe and two P atoms on twofold axes, and one Fe, two P and one K atom in general positions. The K₃Fe₅(PO₄)₆ structure consists of a complex three‐dimensional framework of corner‐sharing between iron polyhedra, and corner‐ and edge‐sharing between PO₄ tetrahedra and iron polyhedra (FeO₅ and FeO₆). This linkage between iron and phosphorus forms intersecting channels containing the K atoms.