Molecular switches of fluorescence operating through metal centred redox couples

Three-component molecular systems (redox active subunit)-spacer-(light-emitting fragment) can operate as fluorescence switches, following the alternate addition of an oxidizing agent and a reducing agent (or the adjustment of the potential of the working electrode in an electrolysis experiment). The redox active subunit typically consists of a metal centred redox couple (M⁽ⁿ⁺¹⁾⁺/Mⁿ⁺), encircled by a macrocyclic receptor, and switching efficiency requires that one of the two oxidation states quenches the proximate fluorophore and the other does not. Four ON/OFF systems, based on either the Cu^II/Cu^I or Ni^III/Ni^II couple, will be discussed. The nature of the quenching process responsible for the OFF state, either electron transfer or energy transfer, is related to the length and to the flexibility-rigidity of the spacer.     

Geographical traceability of West Liguria extravirgin olive oils by the analysis of volatile terpenoid hydrocarbons

This study aimed at evaluating if the volatile terpenoid hydrocarbons of extravirgin olive oils from West Liguria, a North Italy region, could trace their geographical origin. If terpenoid hydrocarbons were individually considered, three compounds, i.e. alpha-copaene, alpha-muurolene and alpha-farnesene, allowed building a simple decision tree and discriminating oils produced in West Liguria from oils produced in other Mediterranean regions. Moreover, the multivariate analysis allowed building West Liguria class-models with high predictive ability, confirming the fundamental role of the volatile terpenoid hydrocarbons for the geographical characterisation of West Liguria oils.     

The hydrogen salicylate ion as ligand. Complex formation equilibria with dioxouranium (VI), neodymium (III) and lead (II)

The complexation equilibria of the hydrogen salicylate ion, HL(-), have been studied, at 25 degrees C, by potentiometric measurements with a glass electrode in 1 M NaClO4 for uranyl and Nd(III) ions and in 3 M NaClO4 for Pb(II) ion. The ligand concentration (CL) was varied between 10(-3) and 0.05 M. In the system with U(VI) the concentrations ranged between: 10(-3) < or = [U(VI)] < or = 0.01 M, 0.5 < or = CL /[U(VI)] < or = 10 and 10(-2) < or = [H+] < or = 10(-5) M; for neodymium system: 2 x 10(-3) < or = [Nd(III)] < or = 0.01, 1 < or = CL /[Nd(III)] < or = 10 and 10(-2) < or = [H+] < or = 10(-7) M; for lead system: 10(-3) < or = [Pb(II) < or = 3 x 10(-3), 1 < or = CL /Pb(II)] < or = 2 and 10(-5) < or = [H+] < or = 10(-7.3) M. The experimental data have been explained with the formation of UO2HL+, UO2L, UO2(OH)L(-), (UO2)2(OH)L2(-) UO2(HL)L(-), NdHL(2+), NdL(+), Nd(OH)L, PbHL(+), PbL and PbL2(2-). Equilibrium constants are given for the investigated ionic media and at infinite dilution.     

Novel heteroaromatic-based multi-branched dyes with enhanced two-photon absorption activity

The first examples of heterocycle-based multi-branched dyes with efficient two-photon absorption (TPA) activity are reported; the novel chromophores exhibit large TPA cross sections (as high as 1600 x 10(-50) cm4 s photon(-1) molecule(-1), measured with 150 fs laser pulses at 800 nm); a strong cooperative enhancement in the branched systems with respect to the one-dimensional sub-units is found.     

Wide Oscillation Finite Time Blow Up for Solutions to Nonlinear Fourth Order Differential Equations

We give sufficient conditions for local solutions to some fourth order semilinear ordinary differential equations to blow up in finite time with wide oscillations, a phenomenon not visible for lower order equations. The result is then applied to several classes of semilinear partial differential equations in order to characterize the blow up of solutions including, in particular, its applications to a suspension bridge model. We also give numerical results which describe this oscillating blow up and allow us to suggest several open problems and to formulate some related conjectures.     

Electrospinning of poly(lactic acid): Theoretical approach for the solvent selection to produce defect‐free nanofibers

In this study an integrated methodology was proposed for the selection of solvent systems to produce electrospinnable solutions that form defect‐free poly(lactic acid) (PLA) fibers with narrow diameter distributions. The solvent systems were chosen using a thermodynamic approach, combined with electrical and rheological property criteria. More specifically, the three step methodology includes (1) initial choice of solvent by solubility evaluation to meet thermodynamic criteria, (2) electrical properties, that is, conductivity and dielectric constant adjustment by using solvent mixtures to meet electrical property criteria, and (3) critical entanglement concentration (C_e) determination by viscosity measurements, supported by elastic and plastic moduli measurements, followed by concentration adjustment to meet rheological criteria. All three criteria need to be met to ensure defect‐free nanofiber morphology. The methodology was demonstrated using PLA solutions that were characterized in terms of thermodynamic properties, conductivity, surface tension, and viscosity measurements. These data were analyzed and related to the nanofiber morphology and diameter as determined from scanning electron microscopy (SEM). Measurements of the elastic (G′) and the plastic (G″) moduli of PLA solutions showed a sharp increase of G′ at the chain entanglement concentration. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1483–1498     

Efficient polymer passivation of ligand‐stripped nanocrystal surfaces

Water‐dispersible, polymer‐wrapped nanocrystals are highly sought after for use in biology and chemistry, from nanomedicine to catalysis. The hydrophobicity of their native ligand shell, however, is a significant barrier to their aqueous transfer as single particles. Ligand exchange with hydrophilic small molecules or, alternatively, wrapping over native ligands with amphiphilic polymers is widely employed for aqueous transfer; however, purification can be quite cumbersome. We report here a general two‐step method whereby reactive stripping of native ligands is first carried out using trialkyloxonium salts to reveal a bare nanocrystal surface. This is followed by chemically directed immobilization of a hydrophilic polymer coating. Polyacrylic acids, with side‐chain grafts or functional end groups, were found to be extremely versatile in this regard. The resulting polymer‐wrapped nanocrystal dispersions retained much of the compact size of their bare nanocrystal precursors, highlighting the unique role of monomer side‐chain functionality to serve as effective, conformal ligation motifs. As such, they are well poised for applications where tailored chemical functionality at the nanocrystal's periphery or improved access to their surfaces is desirable. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A pH-Induced Reversible Conformational Switch Able to Control the Photocurrent Efficiency in a Peptide Supramolecular System

External stimuli are potent tools that Nature uses to control protein function and activity. For instance, during viral entry and exit, pH variations are known to trigger large protein conformational changes. In Nature, also the electron transfer (ET) properties of ET proteins are influenced by pH-induced conformational changes. In this work, a pH-controlled, reversible 3₁₀-helix to α-helix conversion (from acidic to highly basic pH values and vice versa) of a peptide supramolecular system built on a gold surface is described. The effect of pH on the ability of the peptide SAM to generate a photocurrent was investigated, with particular focus on the effect of the pH-induced conformational change on photocurrent efficiency. The films were characterized by electrochemical and spectroscopic techniques, and were found to be very stable over time, also in contact with a solution. They were also able to generate current under illumination, with an efficiency that is the highest recorded so far with biomolecular systems.     

An effective and rapid determination by MALDI/TOF/TOF of methionine sulphoxide content of ApoA‐I in type 2 diabetic patients

Increased oxidation of low density lipoprotein (LDL) is characteristic of atherosclerosis. In this frame, high density lipoproteins (HDL) play an important role, being able to remove lipid peroxides (LPOs) and cholesterol from oxidized LDL, so exhibiting a protective role against atherosclerosis. A wide range of reactive compounds lead to the oxidation of methionine (Met) residues with the formation of methionine sulphoxide (MetO) in apolipoprotein A‐I (ApoA‐I). Consequently, the determination of MetO level can give both an evaluation of oxidative stress and the reduced capability of ApoA‐I in LPOs and cholesterol transport. For these reasons, the development of analytical methods able to determine the MetO level is surely of interest, and we report here the results obtained by MALDI mass spectrometry. Copyright © 2013 John Wiley & Sons, Ltd.