Das Grenzflächenverhalten von Carboxymethylcellulose an Baumwolle

Ohne Zusammenfassung     

Influence of surface treatments in the initial stages of anodizing Al–Ag alloys in neutral electrolytes

Using voltage-time responses and cyclic voltammetry, the initial stages of anodizing of Al–2.1 at.% Ag and Al–4 at.% Ag alloys are shown to depend upon the heat treatment of the alloys and the pre-treatment of the alloy surfaces. Chemical polishing of solution-treated alloys leads to relatively uniform anodic oxidation on a relatively smooth alloy surface, in the absence of significant effects of coarse, silver-rich intermetallics. In contrast, losses of current to oxygen generation arise for the roughened alloy surface from mechanical polishing. With ageing, secondary reactions at the relatively silver-rich intermetallics are more prevalent, although the effects on the voltage-time response depend upon the balance between processes occurring on the matrix and intermetallic regions, including film growth, oxygen generation within the anodic film, film damage due to release of oxygen, dissolution of silver species and re-growth of damaged film.     

On Aging of Acid-Catalyzed Silica Sols—A Dynamic Light Scattering Study

Dynamic light scattering experiments in acid-catalyzed silica sols are discussed. It is shown that in spite of limited parameter accuracy and limited absolute knowledge of the particle sizes, the scattering data from various experiments are comparable with one another and give information about structural differences. Measurements at various angles indicate changes between non-spherical and nearly spherical particles and allow the estimation of gelling times before gelation.     

Application of strategically designed sample composition to the rapid analytical screening of milk samples for polychlorinated biphenyls

Strategically designed sample composition (SSC) is a new technique that decreases the number of analytical determinations needed in routine screening to as few as the number of original sample specimens while providing information that is specific to them. Although this new technique has been applied to environmental studies, this paper describes its first application to food safety studies. Contamination of milk samples with polychlorinated biphenyls (PCBs) was chosen as a case study to show the usefulness and potential of the SSC technique with a fast analytical procedure that involves saponification of the samples and solid-phase microextraction of the PCBs. A total of 20 sample specimens can be analyzed in 11 determinations with excellent predictions of the positive samples and the concentration levels of the contaminants. The robustness of the strategy was investigated and demonstrated.     

Determination of six metals in galician red wines (in northwestern Spain) by capillary electrophoresis

A simple technique is described for the routine simultaneous capillary electrophoretic determination of 6 cations in wine. Separation was achieved on a fused silica capillary column with a UV-Cat-1, alpha-hydroxysobutyric acid and 18-crown-6-ether buffer at pH 4.5 and indirect UV detection at 214 nm. The content of magnesium, sodium, potassium, calcium, manganese, and lithium was determined. The method is quantitative, with recoveries in the 92-102% range, and linear over more than one order of magnitude. The precision is better than 2.5-3.4%. The method is sensible, with detection limits between 0.01 and 0.06 mg/L. Twenty-five red wines with a Certified Brand of Origin from Galicia (north-western Spain) were analyzed by the proposed method. Various wines showed very similar electrophoretic profiles, but significant quantitative differences were observed.     

Photoreaktionen kleiner organischer Moleküle. 4. Mitt. Absorptions-spektren,Photoionen- und Resonanzphotoelektronenspektren von Vinylbromid.

Ohne Zusammenfassung