M−O Bonding Beyond the Oxo Wall: Spectroscopy and Reactivity of Cobalt(III)‐Oxyl and Cobalt(III)‐Oxo Complexes

Terminal oxo complexes of late transition metals are frequently proposed reactive intermediates. However, they are scarcely known beyond Group 8. Using mass spectrometry, we prepared and characterized two such complexes: [(N4Py)Co^III(O)]⁺ ( 1 ) and [(N4Py)Co^IV(O)]²⁺ ( 2 ). Infrared photodissociation spectroscopy revealed that the Co?O bond in 1 is rather strong, in accordance with its lack of chemical reactivity. On the contrary, 2 has a very weak Co?O bond characterized by a stretching frequency of ≤659 cm^?1. Accordingly, 2 can abstract hydrogen atoms from non‐activated secondary alkanes. Previously, this reactivity has only been observed in the gas phase for small, coordinatively unsaturated metal complexes. Multireference ab‐initio calculations suggest that 2 , formally a cobalt(IV)‐oxo complex, is best described as cobalt(III)‐oxyl. Our results provide important data on changes to metal‐oxo bonding behind the oxo wall and show that cobalt‐oxo complexes are promising targets for developing highly active C?H oxidation catalysts.     

Simulations of X-ray absorption spectra: the effect of the solvent

We perform quantum mechanics/molecular mechanics molecular dynamics simulations on the [Pt(2)(P(2)O(5)H(2))(4)](4-) (abbreviated PtPOP) complex; in water, dimethylformamide and ethanol. These are used to calculate the ground state X-ray absorption spectrum of the complex. The structural parameters from X-ray spectra are usually extracted using a fit of the experimental data. In such simulations the solvent is neglected meaning that any effect of the local environment will be compensated for by structural changes of the solute, leading to possible discrepancies in the extracted structural parameters. Our simulations show a significant solvent effect on the spectra, which has important implications for the structural analysis of molecules in solution.     

Quantitative analysis of structure and bandgap changes in graphene oxide nanoribbons during thermal annealing

Graphene oxide nanoribbons (GONRs) are wide bandgap semiconductors that can be reduced to metallic graphene nanoribbons. The transformation of GONRs from their semiconductive to the metallic state by annealing has attracted significant interest due to its simplicity. However, the detailed process by which GONRs transform from wide-bandgap semiconductors to semimetals with a near zero bandgap is unclear. As a result, precise control of the bandgap between these two states is not currently achievable. Here, we quantitatively examine the removal of oxygen-containing groups and changes in the bandgap during thermal annealing of GONRs. X-ray photoelectron spectroscopy measurements show the progressive removal of oxygen-containing functional groups. Aberration-corrected scanning transmission electron microscopy reveals that initially small graphene regions in GONRs become large stacked graphitic layers during thermal annealing. These structural and chemical changes are correlated with progressive changes in the electrochemical bandgap, monitored by cyclic voltammetry. These results show that small changes in the thermal annealing temperature result in significant changes to the bandgap and chemical composition of GONRs and provide a straightforward method for tuning the bandgap in oxidized graphene structures.     

Selective Phosphorylation of α,β-Unsaturated Carbonyl Compounds

Abstract

Elaboration of effective methods of selective phosphorylation of α,β-unsaturated carbonyl compounds containing simultaneously C[dbnd]C and C[dbnd]O bonds, which may compete with each other or react consistently one after another, is one of the most complex problems in the modern organophosphorus synthesis. On the basis of our previous systematic investigations of kinetics and mechanism of the Pudovik and Abramov reactions in the series of α,β-unsaturated carbonyl compounds we have suggested three possible ways to solve this problem: a) soft reaction conditions, regulated by solvent, catalyst and temperature; b) interface catalysis; c) metallocomlex catalysis (reaction in the coordination sphere of transition metal).     

Basicity and Reactivity of Alpha-Aminophosphonates: Theoretical Investigation

Abstract

Previously [1] we have found the possibility of the mechanism alteration for addition of substituted aminophosphonates (RO)₂P(O)CHR¹NHR² to PhNCO (where R = alkyles). which depends on the substituents at phosphorus and carbon atoms. We have performed theoretical investigation of basicity and reactivity of alpha- arninophosphonates by PM3 method using HyperChem molecular modeling package, We found that the calculated basicity parameters are in good correlation with our previous experimental data. From the results of the calculations, the whole series can be divided into three subsets: S1 with R¹=H and R²=n-Bu; S2 with RI=Ar with electronodonating substituent, R²=cycloHex. S3 with R¹=Ar with acceptor substituents, R²=cycloHex. The molecules, which belong to different series, differ in MO distribution on the reaction center NH. The aminophosphinates. containing electrono- withdrawing substituents at both centers (nitrogen and alpha-carbon) are deactivated completely.     

Effects of temperature and anion type on the two-dimensional condensation of the 4,4′-bipyridine cation radical on mercury

The reduction of 4,4′-bipyridine (BPH²⁺₂) on mercury in an acid medium gives a very narrow sharp tail-less reversible voltammetric peak that can be ascribed to the formation of a two-dimensional (2D) phase of the cation radical BPH^·+₂ at the electrode according to the reaction

BPH²⁺₂ + e⁻ |BPH^·+₂|_2D

The corresponding oxidation peak possesses similar properties and arises from the destruction (fusion) of the 2D phase.In this work we studied the influence of some experimental variables, namely the type of anion present in the medium, the concentration of 4,4′-bipyridine and temperature on the 2D phase transition peaks. Also, we tested various analytical criteria to validate this assignation and fitted both voltammetric peaks numerically to the theoretical model developed for this purpose.     

Luminescence rigidochromism and redox chemistry of pyrazolate-bridged binuclear platinum(II) diimine complex intercalated into zirconium phosphate layers

The direct intercalation of a pyrazolate-bridged platinum(II) bipyridyl dimer ([{Pt(dmbpy)(μ-pz)}(2)](2+); dmbpy = 4,4'-dimethyl-2,2'-bipyridine, pz(-) = pyrazolate) within a zirconium phosphate (ZrP) framework has been accomplished. The physical and spectroscopic properties of [{Pt(dmbpy)(μ-pz)}(2)](2+) intercalated in ZrP were investigated by X-ray powder diffraction and X-ray photoelectron, infrared, absorption, and luminescence spectroscopies. Zirconium phosphate layers have a special microenvironment that is capable of supporting a variety of platinum oxidation states. Diffuse reflectance spectra from powders of the blue-gray intercalated materials show the formation of a low-energy band at 600 nm that is not present in the platinum dimer salt. The nonintercalated complex is nonemissive in room-temperature fluid solution, but gives rise to intense blue-green emission in a 4:1 ethanol/methanol 77 K frozen glassy solution. Powders and colloidal suspensions of [{Pt(dmbpy)(μ-pz)}(2)](2+)-exchanged ZrP materials exhibit intense emissions at room-temperature.     

Theoretical insights into the ferromagnetic coupling in oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear complexes with aromatic diimine ligands

Two novel heterobimetallic complexes of formula [Cr(bpy)(ox)(2)Co(Me(2)phen)(H(2)O)(2)][Cr(bpy)(ox)(2)]·4H(2)O (1) and [Cr(phen)(ox)(2)Mn(phen)(H(2)O)(2)][Cr(phen)(ox)(2)]·H(2)O (2) (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and Me(2)phen = 2,9-dimethyl-1,10-phenanthroline) have been obtained through the "complex-as-ligand/complex-as-metal" strategy by using Ph(4)P[CrL(ox)(2)]·H(2)O (L = bpy and phen) and [ML'(H(2)O)(4)](NO(3))(2) (M = Co and Mn; L' = phen and Me(2)phen) as precursors. The X-ray crystal structures of 1 and 2 consist of bis(oxalato)chromate(III) mononuclear anions, [Cr(III)L(ox)(2)](-), and oxalato-bridged chromium(III)-cobalt(II) and chromium(III)-manganese(II) dinuclear cations, [Cr(III)L(ox)(μ-ox)M(II)L'(H(2)O)(2)](+)[M = Co, L = bpy, and L' = Me(2)phen (1); M = Mn and L = L' = phen (2)]. These oxalato-bridged Cr(III)M(II) dinuclear cationic entities of 1 and 2 result from the coordination of a [Cr(III)L(ox)(2)](-) unit through one of its two oxalato groups toward a [M(II)L'(H(2)O)(2)](2+) moiety with either a trans- (M = Co) or a cis-diaqua (M = Mn) configuration. The two distinct Cr(III) ions in 1 and 2 adopt a similar trigonally compressed octahedral geometry, while the high-spin M(II) ions exhibit an axially (M = Co) or trigonally compressed (M = Mn) octahedral geometry in 1 and 2, respectively. Variable temperature (2.0-300 K) magnetic susceptibility and variable-field (0-5.0 T) magnetization measurements for 1 and 2 reveal the presence of weak intramolecular ferromagnetic interactions between the Cr(III) (S(Cr) = 3/2) ion and the high-spin Co(II) (S(Co) = 3/2) or Mn(II) (S(Mn) = 5/2) ions across the oxalato bridge within the Cr(III)M(II) dinuclear cationic entities (M = Co and Mn) [J = +2.2 (1) and +1.2 cm(-1) (2); H = -JS(Cr)·S(M)]. Density functional electronic structure calculations for 1 and 2 support the occurrence of S = 3 Cr(III)Co(II) and S = 4 Cr(III)Mn(II) ground spin states, respectively. A simple molecular orbital analysis of the electron exchange mechanism suggests a subtle competition between individual ferro- and antiferromagnetic contributions through the σ- and/or π-type pathways of the oxalato bridge, mainly involving the d(yz)(Cr)/d(xy)(M), d(xz)(Cr)/d(xy)(M), d(x(2)-y(2))(Cr)/d(xy)(M), d(yz)(Cr)/d(xz)(M), and d(xz)(Cr)/d(yz)(M) pairs of orthogonal magnetic orbitals and the d(x(2)-y(2))(Cr)/d(x(2)-y(2))(M), d(xz)(Cr)/d(xz)(M), and d(yz)(Cr)/d(yz)(M) pairs of nonorthogonal magnetic orbitals, which would be ultimately responsible for the relative magnitude of the overall ferromagnetic coupling in 1 and 2.     

Characterization of poly(3,4-ethylenedioxythiophene):tosylate conductive polymer microelectrodes for transmitter detection

In this paper we investigate the physical and electrochemical properties of micropatterned poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:tosylate) microelectrodes for neurochemical detection. PEDOT:tosylate is a promising conductive polymer electrode material for chip-based bioanalytical applications such as capillary electrophoresis, high-performance liquid chromatography, and constant potential amperometry at living cells. Band electrodes with widths down to 3 μm were fabricated on polymer substrates using UV lithographic methods. The electrodes are electrochemically stable in a range between -200 mV and 700 mV vs. Ag/AgCl and show a relatively low resistance. A wide range of transmitters is shown to oxidize readily on the electrodes. Kinetic rate constants and half wave potentials are reported. The capacitance per area was found to be high (1670 ± 130 μF cm(-2)) compared to other thin film microelectrode materials. Finally, we use constant potential amperometry to measure the release of transmitters from a group of PC 12 cells. The results show how the current response decreases for a series of stimulations with high K(+) buffer.