Carvone epoxidation by system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid”: a combinatorial approach to the process optimization?

Summary Epoxidation of natural terpene (+)-carvone by the system consisting of a catalyst, oxalic acid (co-catalyst) and H₂O₂ (70% aqueous solution; oxidant) was studied and factorial design methods were applied for the optimization of this reaction. A dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) was used as a catalyst, and acetonitrile was employed as a solvent. An analysis by methods of the complete 2⁴ factorial design showed that an increase in the catalyst concentration gives a strong positive effect on the carvone conversion and selectivity. Hydrogen peroxide has a smaller positive effect on the conversion, but at high concentration, H₂O₂ leads to some decrease in the selectivity. An increase in the oxalic acid concentration has a beneficial effect on the conversion, but does not affect the selectivity.     

New benzyne approach to the synthesis of dehydroaporphines, 4,5-dioxoaporphines and aristolactams

A new strategy for the synthesis of some aporphinoid alkaloids is described. It is based on the intermolecular Diels-Alder cyclization between benzyne and an appropriate methylene isoquinoline derivative.     

Carboxylate-bridged copper(II)-lanthanide(III) complexes [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n)(Ln = Dy,Ho, Er,Y; oda = oxydiacetate)

The hydrothermal reaction of Ln(2)O(3) (Ln = Dy and Ho), Cu(OAc)(2).2H(2)O, and oxydiacetic acid in the approximate mole ratio of 1:3:8 resulted in the formation of two new members of the isostructural series of polymers formulated as [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n), crystallizing in the hexagonal crystal system, space group P6/mcc (No. 192). Temperature-dependent magnetic susceptibilities and EPR spectra are reported for the heterometallic compounds Cu-Dy 1, Cu-Ho 2, Cu-Er 3, and Cu-Y 4. The results are discussed in terms of the structure of the compounds, the electronic properties of the lanthanide ions, and the exchange interactions between the magnetic ions.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

Optimized determination of calcium in grape juice,wines, and other alcoholic beverages by atomic absorption spectrometry

This paper describes a study of the different methods of sample preparation for the determination of calcium in grape juice, wines, and other alcoholic beverages by flame atomic absorption spectrometry; results are also reported for the practical application of these methods to the analysis of commercial samples produced in Spain. The methods tested included dealcoholization, dry mineralization, and wet mineralization with heating by using different acids and/or mixtures of acids. The sensitivity, detection limit, accuracy, precision, and selectiviy of each method were established. Such research is necessary because of the better analytical indexes obtained after acid digestion of the sample, as recommended by the European Union, which advocates the direct method. In addition, although high-temperature mineralization with an HNO3-HCIO4 mixture gave the best analytical results, mineralization with nitric acid at 80 degrees C for 15 min gave the most satisfactory results in all cases, including those for wines with high levels of sugar and beverages with high alcoholic content. The results for table wines subjected to the latter treatment had an accuracy of 98.70-99.90%, a relative standard deviation of 2.46%, a detection limit of 19.0 microg/L, and a determination limit of 31.7 microg/L. The method was found to be sufficiently sensitive and selective. It was applied to the determination of Ca in grape juice, different types of wines, and beverages with high alcoholic content, all of which are produced and widely consumed in Spain. The values obtained for Ca were 90.00 +/- 20.40 mg/L in the grape juices, 82.30 +/- 23.80 mg/L in the white wines, 85.00 +/- 30.25 mg/L in the sweet wines, 84.92 +/- 23.11 mg/L in the red wines, 85.75 +/- 27.65 mg/L in the rosé wines, 9.51 +/- 6.65 mg/L in the brandies, 11.53 +/- 6.55 mg/L in the gin, 7.3 +/- 6.32 mg/L in the pacharán, and 8.41 +/- 4.85 mg/L in the anisettes. The method is therefore useful for routine analysis in the quality control of these beverages.     

Performance of a sound card as data acquisition system and a lock-in emulated by software in capillary electrophoresis

The performance of fluorescence detectors in capillary electrophoresis is maximized when the excitation light intensity is modulated in time with optimal frequencies. This is especially true when photomultiplier tubes are used to detect the fluorescent light. The photomultiplier tube amplified raw output signal can in principle be captured directly by a personal computer sound card (PCSC) and processed by a lock-in emulated by software. This possibility is demonstrated in the present work and the performance of this new setup is compared with a traditional data acquisition system. The results obtained with this “PCSC and lock-in emulated by software” were of the same quality or even better compared to that obtained by conventional time integrators (Boxcars) and data acquisition boards. With PCSC the limits of detection (LOD) found for both naphthalene-2,3-dicarboxaldehyde-derivatized tyrosine and alanine were 3.3 and 3.5 fmol (injection of 5 nL of samples at 0.66 and 0.70 μmol/L), respectively. This is at least three times better compared to conventional systems when light emitting diodes (LEDs) are used as the excitation source in fluorescence detectors. The PCSC linear response range was also larger compared to conventional data acquisition boards. This scheme showed to be a practical and convenient alternative of data acquisition and signal processing for detection systems used in capillary electrophoresis.     

A spin-statistics theorem for composites containing both electric and magnetic charges

The present paper states and proves an asymptotic spin-statistics theorem for composites consisting of electrically and magnetically charged particles. We work in the framework of a nonrelativistic theory, taking as the classical configuration space aU(1) bundle over the space of physical configurations, and as the quantum hilbert space the homogeneous square integrable functions on that bundle. The theorems are proved using a formalism we develop here for treating gauge spaces —U(1) bundles with connections; in particular, two products related to tensor products of vector bundles prove to be extremely useful in displaying the structure of the gauge spaces that naturally arise in this theory.Supported in part by the National Science Foundation under grant number PHY 77-07111Supported in part by the National Science Foundation under grant number PHY 78-24275     

Synthesis of pyrazine-phosphonates and -phosphine oxides from 2H-azirines or oximes

[reaction: see text] Tetrasubstituted pyrazines containing two phosphonate groups 2 in positions 2 and 5 and trisubstituted pyrazines containing a phosphonate 5 or a phosphine oxide group 7 in position 2 are obtained by thermal treatment of 2H-azirine-2-phosphonates 1 and -phosphine oxides 6. These pyrazines can also be prepared from beta-ketoxime tosylates 9 and 10 or from oxime derived from phosphine oxide 11.     

The synthesis of thienocycloheptenoindoles

A synthesis of the methylthieno[3,2-c]cyclohepteno[b]indole 7 from 2-methylthieno[3,2-b]cycloheptanone 3 is described. Unsuccessful attempts to prepare the isomeric thienocycloheptenoindole system present in formula 2 , from the dihydrobenzothiophenone 8 , and from derivatives of 5-(2-thienyl)-4-oxopentanoic acid, 17 and 18 , and from N-benzylcycloheptindol-1-one 22 were unsuccessful. The preparation of 4,5-dihydro-2-phenyl-1-thienylmethyl-3H-pyridazin-3-one 20 and of the 5-aminopyrazole 21 are reported.     

The first enantiomerically pure [n]triangulanes and analogues: sigma-[n]helicenes with remarkable features

(M)-(-)- and (P)-(+)-Trispiro[2.0.0.2.1.1]nonanes [(M)- and (P)-3] as well as (M)-(-)- and (P)-(+)-tetraspiro[2.0.0.0.2.1.1.1]undecanes [(M)- and (P)-4]-enantiomerically pure unbranched [4]- and [5]triangulanes-have been prepared starting from racemic bicyclopropylidenecarboxylic [(1RS)-12] and exo-dispiro[2.0.2.1]heptane-1-carboxylic [(1RS,3SR)-13] acids. The optical resolutions of rac-12 and rac-13 furnished enantiomerically pure acids (S)-(+)-12, (R)-(-)-12, (1R,3S)-(-)-13, and (1S,3R)-(+)-13. The ethyl ester (R)-25 of the acid (R)-(-)-12 was cyclopropanated to give carboxylates (1R,3R)-26 and (1R,3S)-26. The ester (1R,3S)-26 and acids (1R,3S)-13 and (1S,3R)-13 were converted into enantiomerically pure methylene[3]triangulanes (S)-(-)- and (R)-(+)-28. An alternative approach consisted of an enzymatic deracemization of endo-[(1SR,3SR)-dispiro[2.0.2.1]heptyl]methanol (rac-20) or anti-[(1SR,3RS)-4-methylenespiropentyl]methanol (rac-18). This afforded (S)-(-)- and (R)-(+)-28 (starting from rac-20), as well as enantiomerically pure (M)-(-)- and (P)-(+)-1,4-dimethylenespiropentanes [(M)- and (P)-23] starting from rac-18. The methylenetriangulanes (S)-(-)- and (R)-(+)-28 were cyclopropanated furnishing (M)- and (P)-3. The rhodium-catalyzed cycloaddition of ethyl diazoacetate onto (S)-(-)- and (R)-(+)-28 yielded four diastereomeric ethyl trispiro[2.0.0.2.1.1]nonane-1-carboxylates in approximately equal proportions. The enantiomerically pure esters (1R,3S,4S)- and (1S,3R,4R)-30 were isolated by careful distillation and then transformed into [5]triangulanes (M)- and (P)-4 using the same sequence of reactions as applied for (M)- and (P)-3. The structures of the key intermediates (R)-12 and rac-31 were confirmed by X-ray analyses. Although [4]- and [5]triangulanes have no chromophore which would lead to any significant absorption above 200 nm, they have remarkably high specific rotations even at 589 nm with [alpha](20)D=-192.7 [(M)-3, c=1.18, CHCl(3))] or +373.0 [(P)-4, c=1.18, CHCl(3))]. This remarkable optical rotatation is in line with their helical arrangement of sigma bonds, as confirmed by a full valence space single excitation configuration interaction treatment (SCI) in conjunction with DFT computations at the B3LYP/TZVP//B3LYP/6-31+G(d,p) level of theory which reproduce the ORD very well. Thus, it is appropriate to call the helically shaped unbranched [n]triangulanes the "sigma-[n]helicenes", representing the sigma-bond analogues of the aromatic [n]helicenes.