Triplet losses in dye lasers

The expression for losses due to triplet states in dye laser considered as a six-level system is given. It is shown that triplet losses depend on pumping parameters and photon number. Depending on molecular and cavity parameters two different behaviours of dye lasers are expected. Physical conditions are discussed in which triplet losses as well as photon number undergo a jump at the threshold.     

Kinetic parameters from thermogravimetric study of used rubber granulates–polyurethane composites

From the TG data of rubber granulates, different polyurethane and composites it can be seen that the thermal decomposition for the rubber granulate and all of the composites start above 520 K. Two major mass losses for the rubber granulates and majority of the composites were observed and thermal decomposition is essentially complete by ~820 K. The changes of activation energies of lower and higher temperature decomposition, calculated according to the different equations were observed for a priori assumed first-order reaction for devolatilisation. Differences between determined and calculated results could suggest a possible reaction between polyurethane agents and rubber granulate during the composites formations.     

Association equlibria in acetonitrile solution of tetracyanoquinodimethanides

Trimetric ion (TCNQ)^2?₃ has been discovered in mixed solutions of TCNQ and LiTCNQ in acetonitrile. The estimated association constant isK_T = 5.6 × 10¹⁰ øl² mol^?2.     

Enhancement of dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal mixture by dispersing nano-sized copper oxide

ABSTRACT

Here, we present the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal (FLC) mixture, namely W302. The FLC mixture, comprising of pyrimidine compounds, was characterised through dielectric spectroscopy, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and other electro-optical methods. The material parameters such as spontaneous polarisation, rotational viscosity, response time and tilt angle of W302 were found to be 14 nC/cm², 240 mPa.s, 150 µs and 28^?, respectively. The phase transition temperatures of W302 were observed through DSC and further confirmed by the dependence of dielectric loss factor in homogeneously aligned FLC sample with temperature. We also demonstrate the observance of a low-frequency dielectric relaxation mode due to the unwinding of the helix, called as partially unwound helical mode (p-UHM) along with Goldstone mode. The behaviour of p-UHM has been systematically studied with temperature and applied bias field. Further, dispersion of nCuO into host W302 has shown a significant increase in dielectric permittivity. Also, the p-UHM relaxation peak in the dielectric regime has disappeared with the incorporation of nCuO. These studies would be useful to fabricate better electro-optical devices for display, switching and beam steering applications. The formulation and characterization of a ferroelectric liquid crystal (FLC) mixture W302 composed of pyrimidine compounds is presented. Then, we observed the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared and characterized FLC mixture.     

Alterations of ciliate phosducin phosphorylation in Blepharisma japonicum cells

We have previously reported that motile photophobic response in ciliate Blepharisma japonicum correlates with dephosphorylation of a cytosolic 28 kDa phosphoprotein (PP28) exhibiting properties similar to those of phosducin. Here we demonstrate in in vivo phosphorylation assay that the light-elicited dephosphorylation of the PP28 is significantly modified by cell incubation with substances known to modulate protein phosphatase and kinase activities. Immunoblot analyses showed that incubation of ciliates with okadaic acid and calyculin A, potent inhibitors of type 1 or 2A protein phosphatases, distinctly increased phosphorylation of PP28 in dark-adapted cells and markedly weakened dephosphorylation of the ciliate phosducin following cell illumination. An enhancement of PP28 phosphorylation was also observed in dark-adapted ciliates exposed to 8-Br-cAMP and 8-Br-cGMP, slowly hydrolysable cyclic nucleotide analogs and 3-isobutyryl-1-methylxanthine (IBMX), a non-specific cyclic nucleotide phosphodiesterase (PDEs) inhibitor. Only slight changes in light-evoked dephosphorylation levels of PP28 were observed in cells treated with the cyclic nucleotide analogs and IBMX. Incubation of ciliates with H 89 or KT 5823, highly selective inhibitor of cAMP-dependent protein kinase (PKA) and cGMP-dependent protein kinase (PKG), respectively, decreased PP28 phosphorylation levels in dark-adapted cells, whereas the extent of light-evoked dephosphorylation of the phosphoprotein was only slightly influenced. Cell treatment with higher Ca2+ concentration together with ionophore A23187 in culture medium resulted in marked increase in PP28 phosphorylation levels, while quite an opposite effect was observed in cells exposed to Ca2+ chelators, EGTA or BAPTA/AM as well as calmodulin antagonists, such as trifluoperazine (TFP), W-7 or calmidazolium. Light-dependent dephosphorylation was not considerably affected by these treatments. The experimental findings presented here suggest that an endogenous light-dependent protein kinase-phosphatase system may be engaged in the alteration of phosducin phosphorylation in ciliate B. japonicum thereby to modulate the cell motile photophobic behavior.     

Preparation and characterization of electrodeposited Ni-Ru alloys: morphological and catalytic study

Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.

Electrochemical deposition of Ni-Ru alloys with various composition and their catalytic activity in water splitting process

     

Single-site mutation and secondary structure stability: an isodesmic reaction approach. The case of unnatural amino acid mutagenesis Ala-->Lac

A method is described to evaluate backbone interactions in proteins via computational unnatural amino acid mutagenesis. Several N-acetyl polyalanyl amides (AcA(n)NH(2)) were optimized in the representative helical (3(10)-, 4(13)-, and a "hybrid" kappa-helix, n = 7, 9, 10, 14) and hairpin (two- and three-stranded antiparallel beta-sheets with type I turns betaalphaalphaepsilon, n = 6, 9, 10) conformations, and extended conformers of N-acetyl polyalanyl methylamides (n = 2, 3) were used to derive multistranded beta-sheet fragments. Subsequently, each residue of every model structure was substituted, one at a time, with l-lactic acid. The resulting mutant structures were again optimized, and group-transfer energies DeltaE(GT) were obtained as heats of the isodesmic reactions: AcA(n)NHR + AcOMe --> AcA(x)LacA(y)NHR + AcNHMe (R = H, CH(3)). These group-transfer energies correlate with the degree of charge polarization of the substituted peptide linkages as measured by the difference Deltae in H and O Mulliken populations in HN-C=O and with the H-bond distances in the "wild-type" structures. A good correlation obtains for the HF/3-21G and B3LYP/6-31G* group-transfer energies. The destabilization effects are interpreted in terms of loss of interstrand and intrastrand H-bonds, decrease in Lewis basicity of the C=O group, and O...O repulsion. On the basis of several comparisons of Ala --> Lac DeltaE(GT)'s with heats of the NH --> CH(2) substitutions, the latter contribution is estimated (B3LYP/6-31G*) to range between 1.5 and 2.4 kcal mol(-1), a figure close to the recent experimental DeltaDeltaG(o) value of 2.6 kcal mol(-1) (McComas, C. C.; Crowley, B. M.; Boger, D. L. J. Am.Chem. Soc. 2003, 125, 9314). The partitioning yields the following maximum values of the electronic association energy of H-bonds in the examined sample of model structures (B3LYP/6-31G* estimates): 3(10)-helix D(e) = -1.7 kcal mol(-1), alpha-helix D(e) = -3.8 kcal mol(-1), beta-sheet D(e) = -6.1 kcal mol(-1). The premise of experimental evaluations of the backbone-backbone H-bonding that Ala --> Lac substitution in proteins is isosteric (e.g., Koh, J. T.; Cornish, V. W.; Schultz, P. G. Biochemistry 1997, 36, 11314) is often but not always corroborated. Examination of the integrity of H-bonding pattern and phi(i), psi(i) distribution identified several mutants with significant distortions of the "wild-type" structure resulting inter alia from the transitions between i, i + 3 and i, i + 4 H-bonding in helices, observed previously in the crystallographic studies of depsipeptides (Ohyama, T.; Oku, H.; Hiroki, A.; Maekawa, Y.; Yoshida, M.; Katakai, R. Biopolymers 2000, 54, 375; Karle, I. L.; Das, C.; Balaram, P. Biopolymers 2001, 59, 276). Thus, the isodesmic reaction approach provides a simple way to gauge how conformation of the polypeptide chain and dimensions of the H-bonding network affect the strength of backbone-backbone C=O...HN bonds. The results indicate that the stabilization provided by such interactions increases on going from 3(10)-helix to alpha-helix to beta-sheet.     

Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.

     

Reactions of Polycyclic Ketones with Dimethoxycarbene; a Convenient Route for a ‘One‐Pot’ Preparation of Some α‐Hydroxycarboxylic Acid Esters

Polycyclic ‘cage’ ketones, such as pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan‐8‐one ( 10 ), pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane‐8,11‐dione ( 11 ), and adamantan‐2‐one ( 16 ) were treated with the nucleophilic dimethoxycarbene (DMC; 1 ), which was generated thermally from 2,5‐dihydro‐2,2‐dimethoxy‐5,5‐dimethyl‐1,3,4‐oxadiazole ( 4a ) in boiling toluene. In this ‘one‐pot’ procedure, the α‐hydroxycarboxylic acid ester 12 or a corresponding derivative 15 or 17 was obtained (Schemes 4–7). Additionally, ‘cage’ thione 21 was treated with DMC under the same conditions yielding dimethoxythiirane 22 (Scheme 8). Subsequent hydrolysis or desulfurization (followed by hydrolysis on silica gel) of 22 gave α‐mercaptocarboxylate 25 and the corresponding desulfurized ester 24 , respectively. In all cases, the addition of DMC occurred stereoselectively, and the addition from the exo‐face is postulated to explain the structures of the isolated products.     

Density functional theory of adsorption of mixtures of charged chain particles and spherical counterions

We propose a microscopic density functional theory to describe nonuniform ionic fluids composed of chain molecules with charged "heads" and spherical counterions. The chain molecules are modeled as freely jointed chains of hard spheres, the counterions are oppositely charged spheres of the same diameter as all segments of chain molecules. The theory is based on the approach of Yu and Wu [J. Chem. Phys. 117, 2368 (2002)] of adsorption of chain molecules and on theory of adsorption of electrolytes [O. Pizio, A. Patrykiejew, and S. Sokolowski, J. Chem. Phys. 121, 11957 (2004)]. As an application of the proposed formalism we investigate the structure and adsorption of fluids containing segments of different length in a slitlike pore.