Introduction of high valent Mo6+ in Prussian blue analog derived Co-layered double hydroxide nanosheets for improved water splitting

Herein, we report a facile method for synthesizing MoCo-layered double hydroxide (LDH) nanosheets employing Prussian blue analog (PBA) as the precursor. The introduction of Mo in Co-LDH modulates the electronic structure, increases the number of active sites and electrochemical surface area to improve the hydrogen evolution, oxygen evolution, and overall water splitting activity. As a result, PBA-derived Mo_0.25Co_0.75-LDH nanosheets demonstrated 10 mA cm^?2 current density at only 220 mV and 115 mV overpotentials for OER and HER, respectively. The overall water splitting was attained at 1.52 V cell voltage for 10 mA cm^?2 current density.     

Possible role of Lewis acid catalysis in the oxidation of alkenes and α,β-unsaturated ketones using bleomycin-zn(ii) and bleomycin-fe(iii)-iodosylbenzene in aqueous methanol

C₆H₅IO in CH₃OH-H₂0 is activated towards electrophilic attack upon various alkenes by Fe(ClO₄).9H₂O, FE(III) bleomycin and ZN(II) bleomycin. The results imply that direct transfer of oxygen from an Fe(V)=0 intermediate is not required in the mechanism of oxygenation by iron-containing species, and that much earlier work is questionable as models for biological oxygenation.     

Metathesis polymerization of N-aryl norbornene dicarboximides. I

Metathesis polymerization of N-phenyl-exo-norbornene dicarboximide and ortho/meta/para methyl substituted phenyl nadimides was carried out using WCl₆/tetramethyltin. Structural characterization was done by FTIR, ¹H- and ¹³C-NMR. A mixture of cis and trans double bond structures were introduced in the backbone during polymerization. The cis content was higher (52 to 65%). In the DSC scan of poly(N-o-tolyl nadimide), two exotherms were observed at 240 and 270°C while in other samples only one exothermic transition was observed above 240°C. These exotherms disappeared in the second heating cycle. The T_g of the polymers, as determined in the second heating cycle, was highest in poly(N-o-tolyl nadimide) and lowest in poly(N-m-tolyl nadimide). The polymers were stable up to 443 ± 3°C and decomposed above this temperature in a single step. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2917–2924, 1997     

Spatially Resolved Covalent Functionalization Patterns on Graphene

Spatially resolved functionalization of 2D materials is highly demanded but very challenging to achieve. The chemical patterning is typically tackled by preventing contact between the reagent and material, which brings various accompanying challenges. Photochemical transformation on the other hand inherently provides remote high spatiotemporal resolution using the cleanest reagent—a photon. Herein, we combine two competing reactions on a graphene substrate to create functionalization patterns on a micrometer scale via the Mitsunobu reaction. The mild reaction conditions allow introduction of covalently dynamic linkages, which can serve as reversible labels for surface‐ or graphene‐enhanced Raman spectroscopy characterization of the patterns prepared. The proposed methodology thus provides a pathway for local introduction of arbitrary functional groups on graphene.     

Platinum-modified adenines: unprecedented protonation behavior revealed by NMR spectroscopy and relativistic density-functional theory calculations

Two novel Pt(IV) complexes of aromatic cytokinins with possible antitumor properties were prepared by reaction of selected aminopurines with K(2)PtCl(6). The structures of both complexes, 9-[6-(benzylamino)purine] pentachloroplatinate (IV) and 9-[6-(furfurylamino)purine] pentachloroplatinate (IV), were characterized in detail by using two-dimensional NMR spectroscopy ((1)H, (13)C, (15)N, and (195)Pt) in solution and CP/MAS NMR techniques in the solid state. We report for the first time the X-ray structure of a nucleobase adenine derivative coordinated to Pt(IV) via the N9 atom. The protonation equilibria for the complexes in solution were characterized by using NMR spectroscopy (isotropic chemical shifts and indirect nuclear spin-spin coupling constants) and the structural conclusions drawn from the NMR analysis are supported by relativistic density-functional theory (DFT) calculations. Because of the presence of the Pt atom, hybrid GGA functionals and scalar-relativistic and spin-orbit corrections were employed for both the DFT calculations of the molecular structure and particularly for the NMR chemical shifts. In particular, the populations of the N7-protonated and neutral forms of the complexes in solution were characterized by correlating the experimental and the DFT-calculated NMR chemical shifts. In contrast to the chemical exchange process involving the N7-H group, the hydrogen atom at N3 was determined to be unexpectedly rigid, probably because of the presence of the stabilizing intramolecular interaction N3-H···Cl. The described methodology combining the NMR spectroscopy and relativistic DFT calculations can be employed for characterizing the tautomeric and protonation equilibria in a large family of transition-metal-modified purine bases.     

Synthesis and characterization of γ-Fe2O3/carbon hybrids and their application in removal of hexavalent chromium ions from aqueous solutions

Magnetic Fe(2)O(3)/carbon hybrids were prepared in a two-step process. First, acetic acid vapor interacted with iron cations dispersed on the surface of a nanocasted ordered mesoporous carbon (CMK-3). In the second step, the primarily created iron acetate species underwent pyrolysis and transformed to magnetic iron oxide nanoparticles. X-ray diffraction, Fourier-transform infrared, and Raman spectroscopies were used for the chemical and structural characterization of the hybrids, while surface area measurements, thermal analysis, and transmission electron microscopy were employed to determine their physical, surface, and textural properties. These results revealed the preservation of the host carbon structure, which was homogenously and controllably loaded (up to 27 wt %) with nanosized (ca. 20 nm) iron oxides inside the mesoporous system. M?ssbauer spectroscopy and magnetic measurements at low temperatures confirmed the formation of γ-Fe(2)O(3) nanoparticles exhibiting superparamagnetic behavior. The kinetic studies showed a rapid removal of Cr(VI) ions from the aqueous solutions in the presence of these magnetic mesoporous hybrids and a considerably increased adsorption capacity per unit mass of sorbent in comparison to that of pristine CMK-3 carbon. The results also indicate highly pH-dependent sorption efficiency of the hybrids, whereas their kinetics was described by a pseudo-second-order kinetic model. Taking into account the simplicity of the synthetic procedure and possibility of magnetic separation of hybrids with immobilized pollutant, the developed mesoporous nanomaterials have quite real potential for applications in water treatment technologies.     

Blends of benzoxazine monomers

This article describes synthesis, characterization and properties of blends of benzoxazine (Bz) monomers, i.e., m-alkylphenyl-3,4-dihydro-2H-benzoxazine (Bz-C), 6,6′-(propane-2,2-diyl)bis(3-phenyl-3,4-dihydro-2H-benzoxazine (Bz-A) and 3-phenyl-3,4-dihydro-2H-benzoxazine-p-carboxylic acid (Bz-pA). Binary blends of Bz-C with Bz-pA, and Bz-A with Bz-pA were prepared by first synthesizing Bz-C or Bz-A followed by the addition of all the ingredients of Bz-pA. In a similar manner, ternary blends of Bz-C, Bz-A and Bz-pA were prepared by first synthesizing Bz-C and subsequent addition of all the ingredients of Bz-A and Bz-pA in one pot. The Bz monomer blends were characterized by ¹H-NMR, FTIR spectroscopy, and differential scanning calorimetry. The temperature of onset of curing (T _o), due to ring-opening polymerization of Bz was found to decrease significantly by incorporation of carboxyl groups (Bz-pA) showing thereby the catalytic effect of acid functionality. Bz polymers showed good thermal stability and incorporation of Bz-pA in blends resulted in a highly cross-linked network. The interlaminar shear strength of glass fabric reinforced composites and the lap shear strength of metal–metal joints using these resin blends was also investigated.     

Biomolecular docking,antimicrobial and cytotoxic studies on new bidentate schiff base ligand derived metal (II) complexes

Three new metal complexes [Cu(L)₂] (1), [Co(L)₂] (2) and [Zn(L)₂] (3) have been prepared by the reaction of hydrated salts of metal (II) acetate with new Schiff base ligand HL, [2‐((4‐(dimethylamino)phenylimino)methyl)‐4,6‐di‐t‐butylphenol] and characterized by different physico‐chemical analyses such as elemental analysis, single XRD, ¹H NMR, FTIR and UV–Vis spectroscopic techniques. Their biomolecular docking, antimicrobial and cytotoxicity studies have also been demonstrated. The proposed structure of Schiff base ligand HL and complex 2 are confirmed by Single crystal X‐ray crystallography study. This analysis revealed that metal (II) complexes remain in distorted tetrahedral coordination environments. The electronic properties such as HOMO and LUMO energies are carried out by gaseous phase DFT/B3LYP calculations using Gaussian 09 program. Complex 1 showed a good binding propensity to the DNA and HSA, during the assessment of docking studies. Schiff base ligand HL and its metal (II) complexes, 1–3 screened for their in vitro antimicrobial activities using the disc diffusion method against selected microbes. Complex 1 shows higher antimicrobial activity than complexes 2, 3 and Schiff base ligand HL. According to the results obtained from the cytotoxic studies, Schiff base ligand HL and its metal (II) complexes 1–3 have better cytotoxicity against MCF‐7 cell lines with potency higher than the currently used chemotherapeutic agent cyclophosphamide.     

Aggregation Effects in Visible‐Light Flavin Photocatalysts: Synthesis,Structure, and Catalytic Activity of 10‐Arylflavins

A series of 10‐arylflavins (10‐phenyl‐, 10‐(2′,6′‐dimethylphenyl)‐, 10‐(2′,6′‐diethylphenyl)‐, 10‐(2′,6′‐diisopropylphenyl)‐, 10‐(2′‐tert‐butylphenyl)‐, and 10‐(2′,6′‐dimethylphenyl)‐3‐methylisoalloxazine ( 2 a – f )) was prepared as potentially nonaggregating flavin photocatalysts. The investigation of their structures in the crystalline phase combined with ¹H‐DOSY NMR spectroscopic experiments in CD₃CN, CD₃CN/D₂O (1:1), and D₂O confirm the decreased ability of 10‐arylflavins 2 to form aggregates relative to tetra‐O‐acetyl riboflavin ( 1 ). 10‐Arylflavins 2 a – d do not interact by π–π interactions, which are restricted by the 10‐phenyl ring oriented perpendicularly to the isoalloxazine skeleton. On the other hand, N3? H???O hydrogen bonds were detected in their crystal structures. In the structure of 10‐aryl‐3‐methylflavin ( 2 f ) with a substituted N3 position, weak C? H???O bonds and weak π–π interactions were found. 10‐Arylflavins 2 were tested as photoredox catalysts for the aerial oxidation of 4‐methoxybenzyl alcohol to the corresponding aldehyde (model reaction), thus showing higher efficiency relative to 1 . The quantum yields of 4‐methoxybenzyl alcohol oxidation reactions mediated by arylflavins 2 were higher by almost one order of magnitude relative to values in the presence of 1 .     

Copolymerization of 2-Hydroxyethyl Methacrylate with Alkyl Methacrylates. Part IV. Mechanical Properties and Biocompatibility

Mechanical properties of copolymers of 2-hydroxyethyl methacrylate with methyl methacrylate, ethyl methacrylate, and n-butyl methacrylate have been investigated using an Instron tensile tester. It was observed that the overall mechanical properties decrease as the ester alkyl group of alkyl methacrylate becomes bulkier. Biocompatibility of the copolymers was also investigated by implanting them subcutaneously in rats.