Synthesis and characterization of corn starch based green composites reinforced with Saccharum spontaneum L graft copolymers prepared under micro-wave and their effect on thermal, physio-chemical and mechanical properties

In this paper, green composites of the corn starch were developed by using resorcinol-formaldehyde (Rf) as the cross-linking agent and reinforced with graft copolymers Saccharaum spontaneum L(Ss) and methyl methacrylates (MMA) as principal monomer and its binary mixture with acrylamide (AAm), acrylonitrile(AN), acrylic acid (AA) prepared under micro-wave. The matrix and composites were found to be thermally more stable than the natural corn starch backbone. There was improvement in physico-chemical and mechanical properties of composite were found to exhibit better than matrix. Ss-g-poly(MMA)-MW reinforced composites were found to exhibit better tensile strength, on the other hand Ss-g-poly(MMA + AA)-MW reinforced composites showed maximum compressive strength and wear resistance than other graft copolymers reinforced composite and the basic matrix. Further the matrix and composites were subjected for biodegradation studies through soil composting method. Different stages of biodegradation were evaluated through FT-IR studies and scanning electron microscopic (SEM) techniques.     

Identification/quantification of multiple pesticide residues in food plants by ultra-high-performance liquid chromatography-time-of-flight mass spectrometry

In this study, the potential of ultra-high-performance liquid chromatography coupled with the time-of-flight mass spectrometry (UHPLC–TOF MS) to enable rapid and comprehensive analysis of 212 pesticide residues in QuEChERS extracts obtained from four plant matrices has been investigated. Method optimization is discussed in detail. In addition to molecular adducts, also fragment ions were provided for all target pesticides, thus obtaining at least three identification points required by European Decision 2002/657/EC was achieved. To get maximum information on analytes present in the extracts, each sample was examined within two injections, the first in a positive and the next one in a negative ionization mode. Under UHPLC conditions, both analyses were completed within 24 min. For more than 96% of pesticides involved in this study, the limit of quantification was ≤10 μg/kg. As a part of the work, strategy enabling screening of non-target pesticides and their metabolites is demonstrated on analysis of real-life samples.     

A convenient purification and preconcentration of peptides with α‐cyano‐4‐hydroxycinnamic acid matrix crystals in a pipette tip for matrix‐assisted laser desorption/ionization mass spectrometry

Peptide samples derived from enzymatic in‐gel digestion of proteins resolved by gel electrophoresis often contain high amount of salts originating from reaction and separation buffers. Different methods are used for desalting prior to matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry (MS), e.g. reversed‐phase pipette tip purification, on‐target washing, adding co‐matrices, etc. As a suitable matrix for MALDI MS of peptides, α‐cyano‐4‐hydroxycinnamic acid (CHCA) is frequently used. Crystalline CHCA shows the ability to bind peptides on its surface and because it is almost insoluble in acidic water solutions, the on‐target washing of peptide samples can significantly improve MALDI MS signals. Although the common on‐target washing represents a simple, cheap and fast procedure, only a small portion of the available peptide solution is efficiently used for the subsequent MS analysis. The present approach is a combination of the on‐target washing principle carried out in a narrow‐end pipette tip (e.g. GELoader tip) and preconcentration of peptides from acidified solution by passing it through small CHCA crystals captured inside the tip on a glass microfiber frit. The results of MALDI MS analysis using CHCA‐tip peptide preconcentration are comparable with the use of homemade POROS R2 pipette tip microcolumns. Advantages and limitations of this approach are discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of New Regioselectively Sulfated Hyaluronans for Biomedical Application

Sulfated glycosaminoglycans (GAGs) display various biological effects which are strongly influenced by the degree of sulfation and the position of sulfate groups within the polymer. Hyaluronan, a non-sulfated GAG, represents a readily accessible educt to synthesize structural analogues of sulfated GAGs mimicking their biological activity. Different strategies were developed and evaluated to synthesize hyaluronan sulfates with a free primary hydroxyl group at C-6' and sulfated secondary hydroxyl groups. Applying selective desulfation methods of high-sulfated hyaluronan by means of silylating agents, products regioselectively desulfated at the primary C-6' but also partly the C-4' position were obtained. A pathway using benzoyl ester protecting groups to block the primary hydroxyl function of Hya during the sulfation resulted in a high-sulfated product, functionalized only at the secondary hydroxyl groups.     

Transition Metal Ions or Acid-induced Suppression of Photoinduced Proton Transfer and Electron Transfer Reaction in 5-(4-Fluorophenyl)-2-hydroxypyridine: A Molecule of Dual Mode Fluorosensitivity

The photophysical properties of 5-(4-fluorophenyl)-2-hydroxypyridine (FP2HP) at different pH and its fluorescence response toward different transition metal ions have been studied by steady-state absorption and emission spectroscopy in combination with quantum chemical calculations. Although keto-enol tautomerization is observed in the excited state, the molecule is weakly fluorescent due to the presence of electron-rich nitrogen atom and relatively electron-deficient fluorine atom, which may lead to photoinduced electron transfer process. In the presence of the transition metal ions, such as Zn²⁺, Cd²⁺, Hg²⁺, etc., the studied molecule exhibits changes in its absorption and emission properties. The present system shows fluorescence enhancement instead of usual quenching in presence of the transition metal ions, such as Fe²⁺ and Cu²⁺. Spectral observation leads to the interpretation that this structurally simple molecule can be effectively utilized as a chelation-enhanced fluorescence-based chemosensor for the detection of transition metal ions. The experimental findings corroborate well with theoretical calculations at Hartree–Fock level using 6-31G** and lanl2dz basis sets.     

Antimicrobial and cytotoxic activities of leaves, twigs and stem bark of Scutia buxifolia Reissek

The antimicrobial and cytotoxic activities of the dichloromethane, ethyl acetate and butanolic fractions from the leaves, twigs and stem bark of Scutia buxifolia were evaluated using the broth microdilution method and the brine shrimp lethality method, respectively. Phytochemical analysis was performed by thin layer chromatography (TLC) and high-performance liquid chromatography (HPLC). The antimicrobial results demonstrated that the strongest effect occurred with the butanol fraction from the twigs and the ethyl acetate fraction from the stem bark against Saccharomyces cerevisiae (minimal inhibitory concentration; MIC?=?62.5?μg?mL(-1)), whereas the ethyl acetate and butanolic fractions from the twigs and stem bark were effective against Pseudomonas aeruginosa and Staphylococcus aureus, with MIC values ranging from 125 to 500?μg?mL(-1). LD(50) values varied from 50.00?±?0.22 to 82.23?±?0.34?μg?mL(-1). Quercetin, quercitrin, isoquercitrin and rutin were identified by HPLC and may be partially responsible for the antimicrobial activities observed. This study reports for the first time the antimicrobial and cytotoxic activities of S. buxifolia leaves, twigs and stem bark.     

Immobilization in biotechnology and biorecognition: from macro- to nanoscale systems

Biological molecules such as enzymes, cells, antibodies, lectins, peptide aptamers, and cellular components in an immobilized form are extensively used in biotechnology, in biorecognition and in many medicinal applications. This review provides a comprehensive summary of the developments in new immobilization materials, techniques, and their practical applications previously developed by the authors. A detailed overview of several immobilization materials and technologies is given here, including bead cellulose, encapsulation in ionotropic gels and polyelectrolyte complexes, and various immobilization protocols applied onto surfaces. In addition, the review summarises the screening and design of an immobilization protocol, practical applications of immobilized biocatalysts in the industrial production of metabolites, monitoring, and control of fermentation processes, preparation of electrochemical/optical biosensors and biofuel cells.     

Synthesis of Aromatic Compounds by Catalytic C?C Bond Activation of Biphenylene or Angular [3]Phenylene

Substituted phenanthrenes and picenes were easily prepared by reaction of biphenylene or angular [3]phenylene with various alkynes in the presence of a catalytic amount of [IrCl(cod)]₂/dppe (cod=1,5‐cyclooctadiene, dppe=1,2‐bis(diphenylphosphino)ethane). The reaction is based on C? C bond activation of the cyclobutane ring. The reaction tolerates the presence of bulky groups on the alkyne, such as the ferrocene moiety. In addition, a catalytic system based on [RhCl(cod)]₂/dppe enabled the, hitherto unreported, reaction of biphenylene with nitriles to provide phenanthridines.     

Redox effects on resin extraction of herbicides from soil

Relative soil aeration affects the surfaces upon which pesticides adsorb and non-ionic resins offer a means of observing and evaluating this factor. A non-ionic resin extractor, developed for pesticide extraction under reducing conditions, was used to adsorb a fraction of the reversibly adsorbed (active portion) herbicides. The extractor consists of cleaned XAD-2 resin encased in a dialysis membrane composed of regenerated cellulose. Anaerobiosis was achieved by incubating soil suspensions with glucose under a 95% N(2)-5% H(2) environment until the redox potential reached -150 mV. Nine soils with a range of physical and chemical characteristics were examined for atrazine, metribuzin, and alachlor content. Amounts of atrazine, metribuzin, and alachlor extracted from soil ranged to 100, 140, and 75 ng g(-1), respectively. Resin extractions (RE) conducted under aerobic conditions recovered about 25-50% of the pesticide extractable with conventional solid phase solvent extraction at 60 degrees C (SPE(60)). Under anaerobic conditions, equal amounts of atrazine were extracted with RE and SPE(60). Slightly less metribuzin was recovered under anaerobic extraction with the exception of those soils lacking detectable amounts by SPE(60). Larger amounts of alachlor were extracted with resins under anaerobic conditions than under aerobic conditions but the amounts were not correlated with those determined by SPE(60). Large amounts of soil organic matter were solublized under anaerobiosis and smaller molecular weight material was extracted with the herbicides. The nature and amounts of co-extracted organic matter varied among soils. RE directly from soil suspensions enabled simultaneous determination of all three herbicides.