Energy Recovery from Municipal Solid Waste in Small Communities

The heating values of municipal solid waste generated in three towns with a population of less than 50 000, situated in Galicia (Spain), were measured with a static bomb calorimeter. Samples of raw refuse were burnt either as received or after sorting of the different combustible components. A study was made of samples from controlled and uncontrolled landfills. The calorific values were compared with those corresponding to a commercial residual derived fuel in order to study the possibility of using municipal solid waste as a source of recovered energy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

thermal stability of epoxy systems badge (n=0)/1,2-dch and badge (n=0)/ 1,2-dch/vinylcyclohexene dioxide

The thermal degradation of the epoxy system diglycidyl ether of bisphenol A (BADGE n=0)/1,2-diamine cyclohexane (DCH) containing different concentrations of an epoxy reactive diluent was studied by thermogravimetric analysis in order to determine the reaction mechanism of the degradation process and to compare it with the results for the same system without diluent. The value of the activation energy, necessary for this study, was calculated using various integral and differential methods. Values obtained using the different methods were compared to the value obtained by the Flynn-Wall-Ozawa"s method (between 193-240 kJ mol^-1 depending on the diluent concentration) with does not require a knowledge of the nth order reaction mechanism. All the experimental results were compared to master curves in the range of Doyle"s approximation (20-35% of conversion). Analysis of the results suggests that the reaction mechanism could be F₂, F₃, or A₂ type. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Binary System BaF2/AlF3

The system BaF₂/AlF₃ is investigated by X-ray and D.T.A., and the liquid-solid phase diagram is established. Five ternary fluorides are disclosed: trimorphic BaAlF₅, Ba₃Al₂F₁₂, Ba₅AlF₁₉, polymorphic Ba₃AlF₉ and Ba₅AlF₁₃. Neutron thermodiffractometry experiments are performed to specify some parts of the diagram. The cell parameters of the fluorides are given and the results are discussed and compared with those of the previous works.     

Crystal and molecular structure of [9-(2′-tosylaminophenyl)-6-methylthio-3-acetyl-5,7,8-triazanone-3,6,8-thien-2-one]

Institute for Applied Physics, Academy of Sciences of the Moldavian SSR. Institute of Chemistry, Academy of Sciences of the Moldavian SSR. Nat. Research Institute for Physics and Organic Chemistry, Rostov State University. Translated from Zhurnal Strukturnoi Khimii, Vol. 31, No. 2, pp. 199–202, 1990.     

Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

Structure—activity relationships for <Emphasis Type="Italic">in vitro</Emphasis> oxime reactivation of chlorpyrifos-inhibited acetylcholinesterase

Organophosphorus pesticides parathion, chlorpyrifos, and malathion inhibit the enzyme acetylcholinesterase (AChE; EC 3.1.1.7) via phosphorylation of its active site. AChE reactivators and anticholinergics are compounds used as antidotes in the case of intoxication by these AChE inhibitors. In this work, chlorpyrifos, a representative member of this pesticide family, was used to inhibit the AChE activity of rat brain. The effect of twenty-one structurally different AChE reactivators was tested in vitro and subsequently, the relationship between their chemical structure and biological activity was outlined.     

Atomic spectroscopy for detection in thermal analysis

An atomic absorption spectrophotometer is coupled to a conventional thermoanalytical quartz furnace as used for TG and DTG to detect the thermally evolved products. In this combined system, the dry aerosol (smoke) obtained by cooling the vapour evolved is transported from the furnace to the flame for metal-specific atomic absorption detection. The particular design of the furnace outlet promotes the formation of stable aerosols. Optimum experimental conditions were determined, using zinc chloride solution, by varying the specimen mass, the heating rate and the flow rate of the furnace gas at a linear temperature program. The absorbancevs. temperature curves obtained with this method for various zinc compounds are compared with the corresponding DTG curves. The applicability of the technique for studying heterogeneous reactions with carbon tetrachloride and hexane vapours is presented. The utilization of an atomic absorption spectrophotometer equipped with a quartz cuvette for detecting the thermal evolution of mercury vapours is described, as well as detection potentials by molecular absorption (for NO and NH₃) and light scattering (for smoke evolved from organic matter). The results obtained with the suggested methods may, in some respects, valuably complement the results achieved with DTG and with flame ionization detection.

---

Zusammenfassung Ein Atomabsorptionsspektrometer wurde mit einem konventionellen thermoanalytischen Quarzofen gekoppelt um thermische Abspaltprodukte nachzuweisen. In diesem kombinierten System wird das durch Kühlung des entwickelten Dampfes erhaltene Aerosol (Rauch) vom Ofen in die Flamme für den metallspezifischen Atomabsorptionsnachweis übergeleitet. Die spezielle Ausbildung der Austrittsöffnung gewährleistet die Bildung eines stabilen Aerosols. Die optimalen Versuchsbedingungen wurden durch Zinkchloridlösungen bei Anderung der Probenmasse, der Aufheizgeschwindigkeit und der Strömungsgeschwindigkeit des Ofengases im linearen Temperaturprogramm ermittelt. Die mit dieser Methode für verschiedene Zinkverbindungen erhaltenen Absorptions—Temperatur-Kurven wurden mit den entsprechenden DTG-Kurven verglichen. Die Anwendbarkeit dieser Technik bei dem Studium heterogener Reaktionen mit Kohlenstofftetrachlorid und Hexandämpfen wird gezeigt. Der Einsatz eines mit einer Quarzküvette zum Nachweis der thermischen Entwicklung von Quecksilberdampf versehenen Atomabsorptionsspektrometers wird beschrieben, sowie die Nachweisgrenze durch molekulare Absorption (für NO und NH₃) und Lichtstreuung (für aus organischem Material entwickelten Rauch). Die bei den beschriebenen Methoden erhaltenen Ergebnisse können, in mancher Hinsicht, die durch DTG und Flammenionisationsnachweis erhaltenen Ergebnisse wertvoll ergänzen.

---

- , , . (), , . . , . — , , -. . - , , , ( NO NH₃) ( , ). , , , - .

---

---

Presented in part at the 24th Hungarian Conference on Analytical Sptecroscopy, Miskolc, June 15–18, 1981. Abstracts pp. 159–162.

---

The authors wish to express their thanks to S. Gál for his assistance in the present application of the temperature programmer developed by him and his group, and for the valuable discussions on the subject. Thanks are also due to K. Tomor and J. Kmives who participated in the comparative thermoanalytical measurements and their analysis.     

Regioselectivity of Birch reductive alkylation of biaryls

[reaction: see text] The regioselectivity of the Birch reductive alkylation of polysubstituted biaryls has been investigated. Results indicate that regioselectivity is affected by the electronic nature of substituents on both aromatic rings. The electron-rich 3,5-dimethoxyphenyl moiety is selectively reduced and then alkylated, while phenols and aniline are not dearomatized under these conditions. Biaryls possessing a phenol moiety are alkylated on the second ring, providing that the acidic proton has been removed prior to the Li/NH3 reduction.