Facile controlled synthesis of micro/nanostructure MCrO4 (M = Ba, Pb) by using Gemini surfactant C12-PEG-C12 as a soft template

Gemini surfactants, double sodium α-sulfonic polyethylene glycol laurate (abbreviated C₁₂-PEG-C₁₂), were prepared and applied as soft templates in the controlled synthesis of BaCrO₄ and PbCrO₄ micro/nanocrystals. The template effects were investigated by adjusting the length of the spacer, using PEG400 and PEG4000, of the Gemini surfactant. The results indicated that the size and morphology of BaCrO₄ and PbCrO₄ micro/nanocrystals varied with the change in spacer length of C₁₂-PEG-C₁₂, suggesting that the different lengths of the polyethylene glycol group spacers in the Gemini surfactants played a key role in determining the size and shape of the MCrO₄ micro/nanoparticles. The dynamic process of the formation of the novel morphology BaCrO₄ crystals showed that the morphology grew from a round-bar polyhedron, to regular polyhedron, to approximate octahedron to a uniform pistachio nut shape. The growth mechanism of the BaCrO₄ micro/nanocrystals was explained that C₁₂-PEG-C₁₂ had a greater interfacial adsorption and would effectively control the shape evolution during the crystal growth, while PbCrO₄ could be explained that the Gemini surfactants can undergo liquid-crystalline phase transitions with long channels providing a soft template effect and derived the nanorods formation. Room temperature fluorescence spectra were studied and these showed that the pistachio-shaped BaCrO₄ microcrystals and PbCrO₄ nanorods possess photoactive luminescence properties with emission peaks at 470 and 549 nm, respectively.     

应用ICP-MS检测转基因大豆油中22种元素含量

随着转基因食品的推广应用,人们越来越关心其营养特性。以转基因大豆油为实验材料,借助于ICP-MS对转基因大豆油中22种元素含量进行了测定。结果显示,七种大量元素含量在0.13～12.52 μg·g-1范围内;15种微量元素在0.15～700.00 ng·g-1之间。大量元素由多到少的顺序是：Ca>Na>K>Mg>Al>P>Si;微量元素中含量最多的五种元素是Zn>Ba>Cr>Fe>Ti。结果说明市场上销售的转基因大豆油,各种营养元素含量可以达到要求,特别是Zn,Ba,Cr,Fe等微量元素含量较高。     

First measurement of inclusive B→Xsη decays

We report a first measurement of inclusive B→Xsη decays, where Xs is a charmless state with unit strangeness. The measurement is based on a pseudoinclusive reconstruction technique and uses a sample of 657×10(6)BB pairs accumulated with the Belle detector at the KEKB e+e- collider. For MXs < 2.6 GeV/c2, we measure a branching fraction of [26.1±3.0(stat)-2.1+1.9(syst)-7.1+4.0(model)]×10(-5) and a direct CP asymmetry of ACP=-0.13±0.04-0.03+0.02. Over half of the signal occurs in the range MXs > 1.8 GeV/c2.     

Anomalies in the Fermi surface and band dispersion of quasi-one-dimensional CuO chains in the high-temperature superconductor YBa2Cu4O8

We have investigated the electronic states in quasi-one-dimensional CuO chains by microprobe angle resolved photoemission spectroscopy. We find that the quasiparticle Fermi surface consists of six disconnected segments, consistent with recent theoretical calculations that predict the formation of narrow, elongated Fermi surface pockets for coupled CuO chains. In addition, we find a strong renormalization effect with a significant kink structure in the band dispersion. The properties of this latter effect [energy scale (～40 meV), temperature dependence, and behavior with Zn-doping] are identical to those of the bosonic mode observed in CuO2 planes of high-temperature superconductors, indicating they have a common origin.     

A plane wave generation method by wave number domain point focusing

A method for generation of a wave-field that is a plane wave is described. This method uses an array of loudspeakers phased so that the field in the wave-number domain is nearly concentrated at a point, this point being at the wave-number vector of the desired plane wave. The method described here for such a wave-number concentration makes use of an expansion in spherical harmonics, and requires a relatively small number of measurement points for a good approximate achievement of a plane wave. The measurement points are on a spherical surface surrounding the array of loudspeakers. The input signals for the individual loudspeakers can be derived without a matrix inversion or without explicit assumptions about the loudspeakers. The mathematical development involves spherical harmonics and three-dimensional Fourier transforms. Some numerical examples are given, with various assumptions concerning the nature of the loudspeakers, that support the premise that the method described in the present paper may be useful in applications.     

The design of a peptide linker group to enhance the SERS signal intensity of an atto680 dye‐nanoparticle system

The Surface enhanced resonance Raman spectroscopy (SERRS) spectra of three modified atto680 dyes were recorded using Au nanoparticles and an excitation laser operating at 670 nm. The dyes were modified with linker groups based on the small peptides, Cys, Cys–Gly and Cys–Gly–Gly. The Cys thiol group acted as the coupling point to the Au surface and the Gly  NH₂ group used to attach the dye. The maximum signal was recorded for the Cys–Gly linker. This gave a signal intensity for the 577 cm⁻¹ Raman peak of the atto680 dye that was more than 27 times greater than the unmodified dye. The Au nanoparticles used had a diameter of 49.8 ± 1.2 nm and were synthesised by the citrate reduction method. The Raman dye‐AuNP probes were also used in an immunoassay to detect mouse IgG in the femto mole range. Copyright © 2010 John Wiley & Sons, Ltd.     

Composition dependent phase transformation of Pt0.5−x Mn0.5+x from A1 to L10 phase

Pt_0.5−x Mn_0.5+x films were prepared by sputtering deposition of Pt foil and Mn target to study the order-disorder transition from a thermodynamic metastable fcc (A1) phase to L1₀ phase. Both Differential Scanning Calorimetry and High Temperature X-Ray Diffraction studies showed the phase transformation from fcc to the L1₀ structure for the Pt_0.50Mn_0.50 and Pt_0.40Mn_0.60 samples but along completely different kinetic paths. A composition dependent phase transformation was observed by comprehensive Differential Scanning Calorimetry studies on a series of Pt_0.5−x Mn_0.5+x samples. The changes of the lattice parameter and the cell volume of L1₀ Pt_0.5−x Mn_0.5+x as a function of composition suggest that the anti-site is not the dominant point defect for L1₀ Pt_0.5−x Mn_0.5+x .     

Micro-FTIR study on structure of macerals from Jurassic coals in Northwestern China

Jurassic coal in Northwest China is rich in resources and it is a necessary premise to reveal the chemical structure characteristics of the coal macerals in this region before the coal is put into reasonable and efficient use. Micro-FTIR technique was used to investigate the chemical composition and structures of vitrinite semifusinite and fusinite from Jurassic coal in Northwestern China. The results show that vitrinite and semifusinite have more aliphatic hydrogen, but fusinite has more aromatic hydrogen and C=O structure. The aliphatic hydrogen in semifusinite is higher than that in fusinite and it is this structure characteristic of semifusinite that led to the richer inertinite but higher reactivity of the Northwestern China coal. Not only vitrinite but also semifusinite and fusinite with weaker reducibility have less aliphatic hydrogen and more C=O structures than those with stronger reducibility. The different intensity of oxidation in the process of coalification is one of the causes that led to different type of reducibility.     

Physical characteristics of polyimide films for flexible sensors

Physical characteristics of polyimide films, including optical, micro/nano mechanical, and thermophysical characteristics were investigated using a photometric, a nanoindentation, and a thermomechanical analyzer for applications in flexible sensors. Experimental results show that UV light cannot transmit into the polyimide films. The transmittances, with a maximum of about 86%, at VIS and near IR lights decrease with increasing PI film thicknesses. The mechanical characteristics were determined using tensile, bending moment, and nanoindentation testing. The stress–strain curve approximated bilinear characteristics, the load–unload bending moment exhibited hysteresis, and nanoindentation generated elastic energy dissipation in the loading–unloading region. Nanoindentation showed an almost uniform hardness and a reduced Young’s modulus of about 0.181±0.03 and 3.21±0.06 GPa, respectively, when the penetrating depth was more than about 2 μm. Thermophysical characteristics were greatly influenced on 8.3 and 25 μm specimens due to the higher relaxation of thin PI films. The thermal expansion remained steady when the thickness was over 50 μm. The results show that PI films have potential in flexible sensing and higher temperature fabrication.     

Superiority of zoom lens coupling in designing a novel X-ray image detector

We design a novel X-ray image detector by lens coupling a Gd2O2S:Tb intensifying screen with a high performance low-light-level (L3,which often means luminescence less than 10-3 Lux) image intensifier.Different coupling effects on imaging performance between zoom lens and fix-focus lens are analyzed theoretically.In experiment,for designing a detector of 15-inch visual field,the system coupled by zoom lens is of 12.25-1p/cm resolution,while the one with fix-focus lens is 10 lp/cm.The superiority of zoom lens is validated.It is concluded that zoom lens preserves the image information better than fix-focus lens and improves the imaging system's performance in this design,which is referential to the design of other optical imaging systems.