一类变时滞离散Cohen-Grossberg神经网络模型周期解的存在性及其指数稳定性

利用重合度理论研究了一类变时滞的离散Cohen-Grossberg神经网络模型的周期解,并得到了模型周期解的全局指数稳定性的充分条件,推广了已有的结果,为神经网络的应用提供了重要的理论基础.最后给出一个例子进行数值模拟,数值模拟的结果更好地验证了结论.     

Influence of MnO_2 Mineralizer on the Crystal Structure,Properties of SiC Kiln Furniture Bonded with Fine Silicon Powder

lINTRODUCTIONSiCkilnfllrniturepossessesgoodhigh-temperaturepropertiesandsmoothness.Itishighlyresistanttowarddeforming,slaggingandthermalshock.Thefurniturecanpracticallyresultinimprovingqualityandproductionofceramicsandiswidelyusedovertheworld.However,SiChassinteringtemperatureofupto2OOO:Ct13landitisdifficulttosinterasproductbyusingcommonkilnfurnace.Toserveashigh-temperaturerefractorykilnfurniture,itmustbemixedwithabonder.Thisworkus-esfinesiliconpowderasabonder,whichisadustproducedfroms…     

近垒能区6Li+208Pb熔合激发函数测量

测量了6Li+208Pb熔合反应近垒能区全熔合截面,并与考虑非弹道耦合和不考虑耦合的CCFUS程序计算做了比较. 结果表明在垒上能区,破裂使熔合截面减小,在垒下能区,破裂对熔合截面的影响基本上可以忽略.     

掺Ba对Bi系2212相超导电性的影响

研究了掺Ｂａ对Bi₂Sr_2-xBa_xCaCu₂O_y（０≤ｘ≤０．１５，０．３）单晶和多晶样品超导电性的影响，结果表明，有少量Ｂａ^２＋离子进入了超导相，且有固溶度极限．对于２２１２相单晶，ｃ轴参数和Ｔ_c均随Ｂａ含量增加而增加；对于慢冷多晶样品，掺Ｂａ可明显提高Ｔ_c；然而对于淬大多晶样品，Ｔ_c没有明显变化，用掺Ｂａ 关键词：     

一种新型时间测量探测器──多气隙电阻板室

介绍了具有6层气隙的电阻板室的结构和工作原理.用动量7GeV/c的粒子束测量了该探测器的性能,得到时间分辨为60—70ps,探测效率大于97%.在动量为3GeV/c的正电荷粒子束流测试中,用该探测器获得了p和π的时间谱,实现了很好的粒子分辨.     

2,2-二甲基-1-[5-二茂铁基-3-(三氟甲基)-1H-吡唑-1-基]丙-1-酮的合成及其电化学性质

以乙酰基二茂铁为原料,经3步反应合成了一个新型的二茂铁衍生物——2,2-二甲基-1-[5-二茂铁基-3-(三氟甲基)-1H-吡唑-1-基]丙-1-酮(4),其结构经1H NMR,ESI-MS,元素分析和X-射线单晶衍射表征。4属单斜晶系,P2(1)/c空间群,晶胞参数a=7.805 6(4),b=20.906 1(11),c=11.124 6(6),β=93.820(2)°,V=1 811.33(17)3,Z=4,Dc=1.482 g·cm-3,μ=0.872 mm-1,R1=0.034 8,wR2=0.089 2。采用循环伏安法研究了4的电化学性质。结果表明:4有一对可逆的氧化还原峰,Epa=0.640 V,Epc=0.482 V,ΔE=153 m V。     

气相色谱-串联质谱法同时测定卷烟滤嘴中15种多环芳烃

建立了气相色谱-串联质谱同时检测卷烟滤嘴中15种多环芳烃的方法。卷烟滤嘴用二氯甲烷振荡萃取后,经0.22μm有机相滤膜过滤,采用DB-5MS色谱柱(30 m×0.25 mm,0.25μm)进行分离,电子轰击源、正离子模式下以多反应监测模式进行检测,内标法进行定量。15种多环芳烃(苊烯、苊、芴、菲、蒽、荧蒽、芘、苯并[a]蒽、屈、苯并[b]荧蒽、苯并[k]荧蒽、苯并[a]芘、二苯并[a,h]蒽、苯并[g,h,i]苝和茚并[1,2,3-c,d]芘)的线性关系良好,相关系数(R~2)为0.991 4~0.999 9。15种多环芳烃在低、中、高3个添加水平下的平均回收率为81.6%~111.2%;除了芴在低添加水平时相对标准偏差为19.2%外,其他相对标准偏差均小于16%。15种多环芳烃的检出限为0.02~0.24 ng/滤嘴,定量限为0.04~0.80 ng/滤嘴。方法前处理简便,具有快速、准确、灵敏度高及重复性好的优点,适用于卷烟滤嘴中多环芳烃的分析。     

Effects of some nucleating agents on the supercooling of erythritol to be applied as phase change material

Nine nucleating agents, calcium pimelate (CaPi), bicyclic [1, 2, 2]heptane di-carboxylate (HPN-68), a commercially obtained aryl amide nucleating agent (TMB-5), calcium salt of hexahydrophthalic acid (HPN-20E), 1,3:2,4-di-p-methylbenzylidene sorbitol (MDBS) and sodium, potassium, magnesium and calcium salt of benzene-1, 3, 5-tricarboxylic acid (Na₃BTC, K₃BTC, Mg₃BTC₂ and Ca₃BTC₂, respectively), were applied to reduce the supercooling of erythritol, and their effects were investigated by cyclic differential scanning calorimetry (DSC). The results revealed that Na₃BTC and K₃BTC could not induce erythritol to crystallize under the experiment condition. MDBS could only make erythritol to crystallize at a temperature slightly higher than that of pure erythritol, and the effect was unstable. Mg₃BTC₂, Ca₃BTC₂ and HPN-68 could induce erythritol to crystallize at relatively high temperature, but the peak temperature of crystallizing (T _{p, cr}) and the phase change enthalpy of crystallizing (Δ_cr H) decreased greatly as the melting–crystallizing cycles increased. HPN-20E-doped erythritol crystallized at a high temperature with the T _{p, cr} of 69.3 °C at the first cycle, but the T _{p, cr} and Δ_cr H varied greatly during the melting–crystallizing cycles. CaPi and TMB-5 could induce erythritol to crystallize at a stable temperature with the T _{p, cr} of about 69 °C and 64 °C, respectively, and with a stable Δ_cr H of about 204 and 185 J g^?1, respectively, in all melting–crystallizing cycles. Hence, CaPi- and TMB-5-doped erythritol could be used as PCMs and applied in thermal energy storage in which the energy was absorbed at a high temperature and released at a lower but stable temperature.     

过模介质O-波导的传播特性

本文详细分析了过模介质O-波导的全部模式,提出一种简单准确的模式分类法,导出了各本征模分离的特征方程,避免了直接求解复杂的特征方程。讨论了按场分布划分的三类正规模:表面模、界面模和泄漏模以及它们的传播特性,给出了相应的近似解。几个极限结果与文献十分吻合。研究表明,适当选择过模介质O-波导的材料参数和波导尺寸,它的传播特性很容易控制。