A New Macroporous Luminescent Hydrogel from Poly(allylamine)

The synthesis of a novel highly swelling, macroporous hydrogel from poly(allylamine) using 3‐chloropentan‐2,4‐dione as a crosslinker is reported. The swelling of the hydrogel was sensitive to changes in pH, temperature, and the extent of crosslinking. The dry gel exhibited a regular honeycomb network with smooth macropores. The hydrogel was inherently luminescent, and so was a metal polychelate.     

Nanocrystalline NaNbO3 and NaTaO3: Rietveld studies,Raman spectroscopy and dielectric properties

Nanocrystalline NaNbO₃ and NaTaO₃ have been synthesized by the reverse micellar technique for the first time. The particle size of NaNbO₃ was found to be 18 nm while that of NaTaO₃ was found to be 40 nm (much smaller size than most of the earlier reports on NaTaO₃). Rietveld refinement of X-ray diffraction data and Raman spectroscopy confirm that the nanoparticles of NaNbO₃ and NaTaO₃ have orthorhombically distorted structures with Pmc2₁ and Pbnm space groups, respectively. The dielectric constant at 25 °C of NaNbO₃ and NaTaO₃ was found to be 209 and 147 at 1 kHz, respectively. The antiferroelectric transition in NaNbO₃ shifts to lower temperature (325 °C) in the nanocrystalline solid.     

Thermo-hydraulic and entropy generation analysis of recharging microchannel using water-based graphene–silver hybrid nanofluid

Journal of Thermal Analysis and Calorimetry - This work numerically investigates thermo-hydraulic and entropy generation characteristics of water-based graphene–silver (Gr–Ag) hybrid...     

Grafting of vinyl monomers onto sisal fiber in aqueous solution

Graft copolymerization of acrylonitrile (AN) onto sisal fibers (chemically modified) was studied using the Mn(III)/EDTA redox system in aqueous solution. The effects of time, monomer (AN), metal ion [Mn(III)] substrate [ethylene diamine tetraacetic acid (EDTA)], temperature, and acid concentration on graft yield have been studied. The effects of thiourea on the graft yield has also been studied. A suitable mechanism is proposed.     

Soluble,thermally stable,flame retardant quinoline-based poly(ester amide)s

A new diamine was prepared via reaction between 8-hydroxy-5-nitroquinoline and 4-nitrobenzoyl chloride, followed by reduction of the nitro groups of the resulted compound. Novel quinoline-based poly(ester-amide)s were produced through polycondensation reactions of the prepared diamine with different diacid chlorides. The monomer and poly(ester-amide)s were characterized and properties of the polymers including solution viscosity, thermal behavior and stability, solubility, and crystallinity were studied.

High thermal stability and improved solubility was observed for the polymers, indicating successful designing of monomer and related polymers for overcoming the main issue of thermally stable polymers, i.e. the problem of increasing solubility versus high thermal stability.

Also, by changing the diacid chlorides for the preparation of poly(ester-amide)s, the structure-property relations were investigated.     

Bio-based tri-functional epoxy resin (TEIA) blend cured with anhydride (MHHPA) based cross-linker: Thermal,mechanical and morphological characterization

A novel renewable resource based tri-functional epoxy resin from itaconic acid (TEIA) was blended with petroleum based epoxy resin (DGEBA) and fabricated at different ratios. Then, it was by thermally cured with methylhexahydrophthalic anhydride (MHHPA) in presence of 2-methylimidazole (2-MI) catalyst. The tensile, modulus, strength of virgin epoxy resin (41.97 MPa, 2222 MPa) increased to 47.59 MPa, 2515 MPa, respectively, with the addition of 30% of TEIA. The fracture toughness parameter, critical stress intensity factor (K_IC) revealed enhancement of toughness in the TEIA bio-based blends system. The thermomechanical properties of TEIA (tri-functional epoxy resin from itaconic acid) modified petroleum-epoxy networks were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). The fracture morphology was also studied by the scanning electron microscopy and atomic force microscopy respectively.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.