求解正定线性方程组的具有共轭性的并行多分裂迭代法（英文）

本文结合具有共轭性的一种特殊多分裂与系数矩阵的稀疏性,提出求解系数矩阵为正定矩阵的线性方程组的并行多分裂迭代法.我们的新迭代法与标准迭代法不同点有两个方面:一是在我们的多分裂方法中只要求其中之一是收敛的分裂;二是权矩阵不必预先给出.这在并行计算中是很有效的算法.最后以数值实验验证新方法的有效性和可行性.     

A new test on the conditional capital asset pricing model

Testing the validity of the conditional capital asset pricing model(CAPM) is a puzzle in the finance literatureLewellen and Nagel[14]find that the variation in betas and in the equity premium would have to be implausibly large to explain important asset-pricing anomaliesUnfortunately, they do not provide a rigorous test statisticBased on a simulation study, the method proposed in Lewellen and Nagel[14]tends to reject the null too frequently.We develop a new test procedure and derive its limiting distribution under the null hypothesis.Also, we provide a Bootstrap approach to the testing procedure to gain a good finite sample performanceBoth simulations and empirical studies show that our test is necessary for making correct inferences with the conditional CAPM.     

How Strain Affects the Reactivity of Surface Metal Oxide Catalysts

Highly dispersed molybdenum oxide supported on mesoporous silica SBA‐15 has been prepared by anion exchange resulting in a series of catalysts with changing Mo densities (0.2–2.5 Mo atoms nm^?2). X‐ray absorption, UV/Vis, Raman, and IR spectroscopy indicate that doubly anchored tetrahedral dioxo MoO₄ units are the major surface species at all loadings. Higher reducibility at loadings close to the monolayer measured by temperature‐programmed reduction and a steep increase in the catalytic activity observed in metathesis of propene and oxidative dehydrogenation of propane at 8 % of Mo loading are attributed to frustration of Mo oxide surface species and lateral interactions. Based on DFT calculations, NEXAFS spectra at the O‐K‐edge at high Mo loadings are explained by distorted MoO₄ complexes. Limited availability of anchor silanol groups at high loadings forces the MoO₄ groups to form more strained configurations. The occurrence of strain is linked to the increase in reactivity.     

三个基于Cu2X2(X-=Cl-、Br-和I-)结构单元双核Cu(Ⅰ)配合物的合成、晶体结构、电子吸收和发射光谱

合成并表征了3个含Cu₂X₂结构单元的双核Cu(Ⅰ)配合物[Cu₂(μ-X)₂(deebq)₂] (其中deebq=2, 2′-联喹啉-4, 4′-二甲酸乙酯;X=Cl (1), Br (2) or I (3))。化合物1~3同构, 其晶体属三斜晶系, 空间群为P1, 具有相似的晶胞参数和晶体堆积结构。Cu₂X₂双核单元具有反演中心对称性, 每个Cu⁺与deebq配体中2个N原子、2个μ₂桥联的卤素X^-阴离子配位, 形成扭曲的四面体配位环境。通过deebq配体中苯环间π…π堆积, 相邻双核分子形成超分子一维链, 超分子链间存在弱范德瓦尔斯引力。在二氯甲烷溶液中, 3个化合物都存在1个宽而不对称的电荷迁移吸收带(500~630 nm区域), 其强度和位置不受桥联X^-配体影响。因此, 电荷迁移带归属为由Cu⁺中心到deebq配体的电荷转移。在二氯甲烷溶液中, 3个化合物发射强荧光, 发射带中心波长位于400 nm处, 该发射带归属为deebq配体内的π-π^*电子跃迁。在固体以及二氯甲烷溶液中, 都没观察到从金属中心到配体的MLCT发射带。     

手性自旋转换铁(Ⅱ)席夫碱配合物的合成、结构及其磁性研究

通过高氯酸亚铁,4-(咪唑-2-甲醛)丁腈和光学纯苯乙胺衍生物的自组装成功合成了2个纯手性单核自旋转换铁(Ⅱ)化合物fac-Λ-[Fe(R-L1)₃](ClO₄)₂(1),fac-Λ-[Fe(R-L₂)₃](ClO₄)₂(2).利用X-射线单晶衍射、元素分析(EA)、红外光谱(IR)、核磁共振氢谱(¹H NMR)、紫外光谱(UV)、圆二光谱(CD)等手段对配合物结构进行了表征.X-射线单晶衍射表明在化合物1和2中,铁(Ⅱ)金属中心与3个不对称双齿手性席夫碱配体中的6个氮原子配位形成八面体配位环境.每个结构基元中包含1个[Fe(L)₃]²⁺阳离子和2个高氯酸根阴离子.由于铁(Ⅱ)中心周围手性配体的螺旋协调配位使[Fe(L)₃]²⁺形成单一手性Λ构型.Fe(Ⅱ)N键长表明配合物1和2中的铁(Ⅱ)在低自旋状态.在[Fe(L)₃]²⁺中,相邻配体中的苯环和咪唑环形成分子内π-π相互作用.配合物1和2通过分子间C-H…π相互作用形成三维超分子结构.CD光谱证实配合物1和2在溶液中的光学活性.磁性测试表明配合物1和2分别在232和250 K发生自旋转换.由于配合物1和2具有相同的手性空间群和类似的堆积方式和分子间相互作用,导致1和2表现出不同自旋转换温度的原因主要是取代基效应.     

ZSM-5高硅分子筛硅烷化疏水改性的研究

以甲苯为溶剂,正辛基三乙氧基硅烷(OTS)为改性剂,进行了ZSM-5高硅分子筛疏水改性研究。通过傅立叶红外(FT-IR)、X射线粉末衍射(XRD)、N2吸附-解吸附、静态水接触角、水与正己烷的静态吸附,以及水热稳定性试验等测试了改性前后样品结构与性能。结果表明,通过硅烷化改性在ZSM-5上接枝了-Si(CH2)7CH3基团,并实现了超疏水性。当0.8g ZSM-5使用0.24g改性剂时,改性后分子筛的接触角达152°,水吸附量下降了1.49%,比表面积、孔容、孔径分别减小了62.7m2/g、0.0329cm3/g、0.42nm,孔道长程有序性有所降低,且具有较高的水热稳定性。     

发育期适度缺铁性贫血致新生豚鼠耳蜗毛细胞凋亡

目的观察孕期和哺乳期适度缺铁性贫血诱导子代豚鼠耳蜗毛细胞凋亡。方法 12只受孕豚鼠随机分为两组(对照组和适度缺铁性贫血组)。子代豚鼠于出生后9 d断乳,行畸变产物耳声发射(distortion product otoacoustic emission,简称DPOAE)检测听力;分离耳蜗,行全基底膜铺片,用原位末端转移酶标记技术(terminal deoxynucleotidyl transferase-mediated dUTP-biotin nickend-labelling,简称TUNEL)染色和免疫组化检测毛细胞凋亡情况。结果孕期和哺乳期铁适度缺铁性贫血致子代豚鼠听力损伤,耳蜗毛细胞凋亡发生,caspase-3/9免疫阳性表达。结论孕期和哺乳期铁缺乏适度缺铁性贫血可诱导子代豚鼠耳蜗毛细胞凋亡发生。     

Stereospecific radical polymerization of optically active (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide catalyzed by Lewis acids

The effects of Lewis acids, namely, rare earth metal trifluoromethanesulfonates, on the radical polymerization of (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide were examined under various conditions. In the absence of Lewis acids, syndiotactic-rich polymers (r = 84%) were obtained, whereas in the presence of a catalytic amount of Lewis acids, the polymerization proceeded in an isotactic-specific manner (m up to 64%). Polymerization solvents strongly influenced the effect of the Lewis acids. The polymerization in n-butyl alcohol showed the highest isotactic selectivity, whereas the polymerization in DMSO showed no isotacticity-enhancing effect. Further increases in the Lewis acid concentration and the polymerization temperature did not produce clear effects on the tacticity of the polymers. The interaction between the monomer and Lewis acids was investigated, and the plausible mechanism of stereocontrol in the radical polymerization of (S)-HPEMA was analyzed based on the Lewis acid-monomer interaction.     

Plutonium-239 sorption and transport on/in unsaturated sediments: comparison of batch and column experiments for determining sorption coefficients

Sorption (distribution) coefficients of plutonium were most often derived by static batch experiments. However, it is not clear how unsaturated flow conditions including moisture content and pore water velocity change the sorption coefficients. Transport experiments of plutonium through the unsaturated sediments packed into the columns were then performed in order to determine the sorption coefficients (column-K _ds). Static batch experiments were also conducted to obtain batch-K _ds and then compare the differences between batch-K _ds and column-K _ds. The results show that unsaturated flow conditions had no significant effect on column-K _ds, and the average column-K _d value was 1.74 ± 0.02 m³/kg. By comparison, batch-K _d values spanned several orders of magnitude, regardless of the specified liquid–solid conditions. Moreover, the batch-K _d (22.7 m³/kg) at the standard L/S (4 mL/g) recommended by ASTM D 4319 was over an order of magnitude larger than the average column-K _d.