CT实验仪的研制及其在物理教学中的应用

介绍了我们研制的CT实验仪的原理及开发，使用情况，包括CT的物理，数学原理，CT装置的结构，性能、工作原理等，文末给出实验结果，并对装置在物理实验教学中的意义作了讨论。     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

ON THE COHOMOLOGY OF GENERALIZED RESTRICTED LIE ALGEBRAS

0.IntroductionThispaperisaimedatdevelopingthecohomologytheoryofmodularLiealgebrasandthendeterminingthefirstcohomologygroupsofCartantypeLiealgebras.AsgeneralizationoftheconceptofrestrictedLiealgebras,ageneralizedrestrictedLiealgebra(GRLiealgebra)wasintroducedin[21],whichisassociatedwithabasisandamappingofthebasisintotheLiealgebrasatisfyingthegeneralized-restrictednessconditions.Generalizedrestrictedrepresentations(GRrepresentations)werethenintroduced,whichcanbereducedtotherepresentationsofa…     

浙江发展会展旅游的战略构想

通过对浙江会展旅游现状的分析和研究,总结了浙江会展旅游业的现状与优势,指出了面临的问题,进而从政府与会展企业角度提出了发展浙江会展旅游业的对策.     

Bi3+和Eu3+在Ca2SiO4中的发光和能量传递

用高温固态反应合成了Ca2SiO4:Bi3+,Ca2SiO4:Eu3+和Ca2SiO4:Eu3+,Bi3+发光体。讨论了不同掺杂量和掺杂种类时Bi3+对Eu3+的5D0-7F1,5D0-7F2发射的影响规律。实验发现,Ca2SiO4:Bi3+在紫外线激发下发出明亮的蓝色光,Ca2SiO4:Eu3+,Bi3+中的Bi3+能将激发能传递给Eu3+,使Eu3+的5D0-7F1和5D0-7F2两种跃迁都大大加强,同时,Bi3+也发出鲜艳的紫色光。     

造纸污泥与废水污泥流化床焚烧时NO_x和SO_2的排放特性研究

1前言流化床焚烧污犯是近年来发达国家广泛采用的方法，它能很好地实现污泥的稳定化、无害化、减容化和资源化处理。燃煤流化床锅炉污染物排放方面已做了大量的研究工作，由于污泥与煤在结构和性质方面的差异较大，因此有必要对流化床焚烧污泥时污染物排放特性进行研究。本文详细研究了造纸、废水污泥在流化床中焚烧时污泥水份、运行床温及过量空气对NO。和SO。的排放特性及污泥N－＋NO。、S－SO。的转化率的影响，并对这两种性质差异较大的污泥焚烧时的NO。和502的生成特性进行了对比分析，取得了许多有价值的结果，为污泥流化床焚烧…     

具有一对零态射的Morita Context环(II)

设$(A,B,V,W,\psi,\phi)$是一个Morita Context,具有一对零态射$\psi=0$, $\phi=0$, $C =\left ( \begin{array} {cc}A & V \\W & B \end{array}\right)$是对应的Morita Context环.本文给出了$C$与$A,B,V,W$之间关于环的$\pi$-正则性、semiclean性、Mophic性和环的Exchgange性、Potent性、GM性的关系.     

PINNING EFFECT OF LEAD LANTHANUM TITANATE THIN FILMS DEPOSITED ON DIFFERENT SUBSTRATES

Pinning effect of lead lanthanum titanate (PLT) ferroelectric thin films with excess PbO of 20 mol% has been studied for deposition on diffe rent substrates. Silicon, sapphire and quartz were used as substrates on which P t/Ti or LaNiO₃ thin films were deposited as bottom electrodes. Electron probe analysis results showed that there was still a certain amount of excess Pb in PLT films after annealing at 550 ℃ for 1 h, and the amount of it was dependent on the substrate used. The distribution of excess Pb in the films was investig ated by Auger electron spectroscopy depth profile. It was shown that the substrates and the bottom electrodes had significant effects on the content and distrib ution of excess Pb in PLT films. The excess Pb and its accumulation at the inter face between the film and bottom electrode may act as pinning centers and have a pinning effect on domains, which can be observed by abnormal P-E hysteresis loops and abnormal C-V curves. The excess Pb content in the films and the accumulation of Pb at the interface were high in PLT films deposited on Pt/Ti/S i, and considerable pinning effect was observed. As LaNiO₃ would absorb most part of the excess Pb in PLT films, the content of excess Pb in the films deposited on LaNiO₃/Si was very low and the pinning effect was hardly observed.     

On the Kauffman skein modules

 Let k be a subring of the field of rational functions in α, s which contains α ^±1 ,s ^±1 . Let M be a compact oriented 3-manifold, and let K(M) denote the Kauffman skein module of M over k. Then K(M) is the k-module freely generated by isotopy classes of framed links in M modulo the Kauffman skein relations. In the case of , the field of rational functions in α, s, we give a basis for the Kauffman skein module of the solid torus and a basis for the relative Kauffman skein module of the solid torus with two points on the boundary. We then show that K(S ¹ × S ² is freely generated by the empty link, i.e., . Received: 20 October 2001 / Revised version: 20 March 2002     

管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．