Thermal conductance of nanofluids: is the controversy over?

Over the last decade nanofluids (colloidal suspensions of solid nanoparticles) sparked excitement as well as controversy. In particular, a number of researches reported dramatic increases of thermal conductivity with small nanoparticle loading, while others showed moderate increases consistent with the effective medium theories on well-dispersed conductive spheres. Accordingly, the mechanism of thermal conductivity enhancement is a hotly debated topic. We present a critical analysis of the experimental data in terms of the potential mechanisms and show that, by accounting for linear particle aggregation, the well established effective medium theories for composite materials are capable of explaining the vast majority of the reported data without resorting to novel mechanisms such as Brownian motion induced nanoconvection, liquid layering at the interface, or near-field radiation. However, particle aggregation required to significantly enhance thermal conductivity, also increases fluid viscosity rendering the benefit of nanofluids to flow based cooling applications questionable.     

3,3′-Benzene-1,4-diylbis[1-(substituted)phenylprop-2-en-1-one] derivatives: A new class of materials for third-order nonlinear optical applications

We have investigated the third-order nonlinear optical parameters of Bischalcones embedded in DMF solution and in solid PMMA matrix, by Z-scan technique using nanosecond laser pulse trains at 532 nm. Z-scan results reveal that the Bischalcones exhibits negative nonlinear refractive index as high as 10⁻¹¹ esu. The molecular two-photon absorption cross-section of Bischalcones were of the order 10⁻⁴⁶ cm⁴ s/photon, which is nearly two orders of magnitude larger than that of Rhodamine 6G which is 10⁻⁴⁸ - 10⁻⁵⁰ cm⁴ s/photon. We found that, the two-photon absorption (TPA) is the dominating nonlinear process leading to nonlinear absorption in both the cases in solution and as well as in solid medium. Based on TPA process, the Bischalcones exhibit good optical power limiting of nanosecond laser pulses at the input wavelength. The nonlinear optical parameters found to increase on enhancing the strength of the electron donor groups indicating the dependence and importance of electron donor/acceptor units on third-order nonlinear optical susceptibility χ⁽³⁾.     

Synthesis of multiwall carbon nanotubes by chemical vapor deposition of ferrocene alone

Multiwall carbon nanotubes (MWNTs) filled with Fe nanoparticles (NPs) have been synthesized by thermal chemical vapor deposition of ferrocene alone as the precursor. The MWNTs were grown at different temperatures: 980 and 800 ^°C. Characterization of as-prepared MWNTs was done by scanning and transmission electron microscopy, and X-ray diffraction. The transmission electron microscopy study revealed that Fe NPs encapsulated in MWNTs grown at 980 and 800 ^°C are spherical and rod shaped, respectively. Room-temperature vibrating sample magnetometer studies were done on the two samples up to a field of 1 T. The magnetization versus magnetic field loop reveals that the saturation magnetization for the two samples varies considerably, almost by a factor of 4.6. This indicates that Fe is present in different amounts in the MWNTs grown at the two different temperatures.     

Structural and electronic properties of group III Rich In0.53Ga0.47As(001)

The structural and electronic properties of group III rich In_0.53Ga_0.47As(001) have been studied using scanning tunneling microscopy/spectroscopy (STM/STS). At room temperature (300 K), STM images show that the In_0.53Ga_0.47As(001)–(4 × 2) reconstruction is comprised of undimerized In/Ga atoms in the top layer. Quantitative comparison of the In_0.53Ga_0.47As(001)–(4 × 2) and InAs(001)–(4 × 2) shows the reconstructions are almost identical, but In_0.53Ga_0.47As(001)–(4 × 2) has at least a 4× higher surface defect density even on the best samples. At low temperature (77 K), STM images show that the most probable In_0.53Ga_0.47As(001) reconstruction is comprised of one In/Ga dimer and two undimerized In/Ga atoms in the top layer in a double (4 × 2) unit cell. Density functional theory (DFT) simulations at elevated temperature are consistent with the experimentally observed 300 K structure being a thermal superposition of three structures. DFT molecular dynamics (MD) show the row dimer formation and breaking is facilitated by the very large motions of tricoodinated row edge As atoms and z motion of In/Ga row atoms induced changes in As–In/Ga–As bond angles at elevated temperature. STS results show there is a surface dipole or the pinning states near the valence band (VB) for 300 K In_0.53Ga_0.47As(001)–(4 × 2) surface consistent with DFT calculations. DFT calculations of the band-decomposed charge density indicate that the strained unbuckled trough dimers being responsible for the surface pinning.     

Improvement on Quantum Teleportation of Three and Four Qubit States Using Multi-Qubit Cluster States

International Journal of Theoretical Physics - In 2016, Li et al. [Int. J. Theor. Phys. 55, 1820–1823 (2016)] proposed schemes for quantum teleportation of certain class of three and four...     

Ply-by-Ply Failure Analysis of Laminates Under Dynamic Loading

Ply-by-ply failure analysis of symmetric and anti-symmetric laminates under uniform sinusoidal transverse dynamic loading is performed for a specified duration. The study investigates the first ply failure load, followed by the detection of successive ply failures along with their failure modes using various failure theories. Some of the well-established failure theories, mostly used by the researchers, are considered for the failure prediction in laminates. The finite element computational model based on higher order shear deformation displacement field is used for the failure analysis and the complete methodology is computer coded using FORTRAN. The ply-discount stiffness reduction scheme is employed to modify the material properties of the failed lamina. The failure theories used in the analysis are compared according to their ability to predict failure load, failed ply, failure mode and progression of failure. The failure analysis is performed for both the cross-ply and angle-ply laminates with all edges simply supported and clamped. The significance of fibre orientation and stacking sequence in terms of the strength of a laminate and failure progression is also highlighted.     

An Analytical Technique,Based on Natural Transform to Solve Fractional-Order Parabolic Equations

This research article is dedicated to solving fractional-order parabolic equations using an innovative analytical technique. The Adomian decomposition method is well supported by natural transform to establish closed form solutions for targeted problems. The procedure is simple, attractive and is preferred over other methods because it provides a closed form solution for the given problems. The solution graphs are plotted for both integer and fractional-order, which shows that the obtained results are in good contact with the exact solution of the problems. It is also observed that the solution of fractional-order problems are convergent to the solution of integer-order problem. In conclusion, the current technique is an accurate and straightforward approximate method that can be applied to solve other fractional-order partial differential equations.     

On nonoscillatory solutions of differential inclusions

This paper introduces a nonoscillatory theory for differential inclusions based on fixed point theory for multivalued maps.

     

Positive Solutions to Singular Boundary Value Problems with Sign Changing Nonlinearities on the Half-Line via Upper and Lower Solutions

This paper presents a lower and upper solution technique for singular second order boundary value problems on the half line.