Studies on long lasting optical properties of Eu2+ and Dy3+ doped di-barium magnesium silicate phosphors

Di-bariummagnesium silicate phosphors doped with europiumand dysprosium were prepared under a weak reducing atmosphere. X-ray diffraction pattern of the sample was also done that confirmed the proper preparation of the phosphor. Scanning electron microscope (SEM) images confirmed that the sample has regular surface and uniform grain size distribution. Comparative studies of phosphorescence decay of Ba₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors with different concentration of Dy³⁺ were done. The phosphor with 0.5/1.5 mol% of Eu/Dy, exhibited optimum green color afterglow properties. This emission is expected to arise due to transition of Eu²⁺ ions from any of the sublevels of 4f⁶5d¹ configuration to ⁸S_7/2 level of the 4f⁷ configuration. For a suitable trap depth, the trap concentration is expected to be proportional to the concentration of Dy³⁺. These traps are responsible for holding the charge career for a reasonable time, subsequently for increasing the time of afterglow. Hence, optimum Dy³⁺ concentration produces the longer afterglow duration with higher intensity of luminescence signals. Trap depth were also calculated using thermoluminescence glow curve which was indicative of formation of traps suitable for long afterglow.     

Regiospecific oxidation of an alkyl group of aromatic amine to carbonyl group by DDQ in aq.medium

The regiospecific oxidation of alkyl group of both sterically hindered and unhindered aromatic amine to corresponding carbonyl compound was done in aq. medium by using DDQ. The optimized reaction protocol was found to be most simple, high yielding and novel method for oxidation of alkyl group of aromatic amine in to its carbonyl compound.     

Strong convergence theorems for strongly continuous semigroups of pseudocontractions

In this work, strongly continuous semigroups of pseudocontractions are studied based on an implicit iterative algorithm. Strong convergence theorems of fixed points are obtained in an arbitrary Banach space.     

Mechanoluminescence and thermoluminescence of Mn doped ZnS nanocrystals

This paper reports the synthesis of ZnS:Mn nanocrystals by the chemical route in which mercaptoethanol was used as the capping agent. The particle size of such nanocrystals was measured using XRD and TEM patterns and was found to be in between 3and 5 nm. It was found that the peak position of TL glow curve and the TL intensity of ZnS:Mn nanoparticles increases as the particle size is decreased. The isothermal decay technique is used to determine the trap-depth. The stability of the charge carriers in the traps increase with the decrease in size of the nanoparticles. The higher stability may be attributed to the higher surface/volume ratio and also to the increase in the trap-depth with decreasing particle size. When a ZnS:Mn nanocrystal is deformed the peak intensity I_m increases linearly with the increasing height of the load. After I_m, initially the ML intensity decreases at a fast rate, and later on it decreases at a slow rate. The ML in ZnS:Mn nanocrystals can be understood on the basis of the piezoelectrically induced electron detrapping model.     

Magnetoelectric behavior of ferrimagnetic BixCo2−xMnO4 (x=0, 0.1 and 0.3) thin films

Thin films of Bi_xCo_2−xMnO₄ (x=0, 0.1 and 0.3) were grown on quartz, LaAlO₃ (LAO) and YBa₂Cu₃O₇ (YBCO) buffer layer coated LAO substrates by pulsed laser deposition (PLD). X-ray diffraction (XRD) and Raman scattering measurements showed that the thin films exhibit single phase polycrystalline cubic spinel structure on all the substrates. Near edge X-ray absorption fine structure (NEXAFS) studies confirmed the octahedral occupancy of the substituted Bi³⁺ ions. Temperature dependent zero-field cooled (ZFC) magnetization measurements show the ferrimagnetic (FM) behavior (T_C∼186 K) and magnetization undergoes a crossover from positive to negative, owing to the opposite contributions of magnetic moments from Co and Mn ions. A weak ferroelectric property exhibited by the films above room temperature was evidenced through the capacitance-voltage (C-V) and dielectric measurements. Magnetoelectric coupling was found to be maximum just below FM-T_C.     

Quantum chemical studies on the structure and detonation properties of the fused polynitrodiazoles: New high energy density molecules

In this study, we explore the possibility that fused polynitrodiazoles act as high energy density materials. Density functional theory calculations at the B3LYP/aug‐cc‐pVDZ level were performed to predict the structure, energy of explosion (≈1.68 kcal g^?1), density (≈1.98 g cm^?3), detonation velocity (≈9.50 km s^?1), and detonation pressure (≈41.50 GPa) of model molecules. The predicted properties have been found to be promising compared with 3,4,5‐trinitro‐1H‐pyrazole, 1,3,5‐trinitro‐1,3,5‐triazinane, and octahydro‐1,3,5,7‐tetranitro‐l,3,5,7‐tetraazocane. The nature of azoles of the molecule presumably determines the geometry, stability, sensitivity, density, and detonation performance. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Synthesis,characterization, and evaluation of antimicrobial activities of a new class of macrocyclic phosphonates

A series of a new class of phosphorus analogue macrocycles was accomplished by condensation of N‐substituted‐[bis(3,5‐dimethyl‐2‐hydroxybenzyl)]‐amines with various phosphorus dichlorides in dry toluene in the presence of triethylamine at 0–50°C. All the title compounds were evaluated for antimicrobial activity to determine their efficacy and were effective in suppressing the growth of bacteria and fungi. The chemical structures of the title products were characterized by IR, ¹H, ¹³C, ³¹P‐NMR, mass spectral studies, and elemental analysis. J. Heterocyclic Chem., (2011).     

A convenient one-pot synthesis of 3,5-diarylisoxazoles via oxidative cyclisation using catalytic CuBr2 and oxone

A facile one-pot synthesis of 3,5-diarylisoxazoles from α,β-unsaturated ketones and hydroxylamine hydrochloride is reported. The reaction is efficiently promoted by catalytic CuBr₂ and Oxone to afford the desired products mostly in high yields and in relatively short time. The mild nature of the synthesis and short reaction time are notable advantages of the developed protocol. This protocol is effective toward various substrates having different functionalities.     

Adiabatic small polaron-hopping conduction in Ln0.85Ca0.15MnO3 (Ln=Nd, Pr and Sm) perovskites

Polycrystalline bulk ferromagnetic insulating (FMI) Ln_0.85Ca_0.15MnO₃ (Ln=Nd, Pr and Sm) samples are prepared by standard solid-state reaction route and characterized. Powder X-ray diffraction (XRD) data of the manganites show single-phase character. Existing theoretical models predict that the high temperature (T>θ_D/2, θ_D being the Debye temperature) dc conductivity (σ_dc) of these samples is due to adiabatic small polaron-hopping conduction. Greaves’ and Mott's variable range hopping (VRH) conduction mechanisms are not suitable to explain the σ_dc data at low temperature (T<θ_D/2).