PAST AND FUTURE MANAGEMENT OF A COLLAPSED FISHERY: THE BAY OF BISCAY ANCHOVY

Abstract We analyze the efficiency of the international management of the Bay of Biscay anchovy. While a sharing agreement between France and Spain has been in place since 1992, the fish stock collapsed in 2005 and the fishery closed from 2005 to spring 2010. We consider differences in production technologies between both countries and calibrate our model using data from 1987 to 2009. Our results suggest two sources of rent dissipation under the existing sharing agreement: inefficient quota allocation and production inefficiencies due to inflexible national regulations. We discuss several alternatives to improve management.     

Near-diffraction-limited laser beam shaping with diamond-turned aspheric optics

We used a pair of diamond-turned CaF(2) aspheres to convert the pure TEM(00) Gaussian spatial profile output of a diode-pumped Nd:YAG laser oscillator into a super-Gaussian intensity profile with a nearly flat phase front. The resulting super-Gaussian beam was nearly diffraction limited with an M(2) of 1.75; in the near field the 5-mm diameter beam retained a nominally flat-top intensity distribution without significant diffraction peaks for an excellent working distance of more than 50cm. A 10% improvement in amplifier-energy extraction obtained by use of the reshaped beam is demonstrated.     

An LX-10 kinetic model calibrated using simulations of multiple small-scale thermal safety tests

A new chemical kinetic model for the beta-delta transition and decomposition of LX-10 (95% octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine, 5% Viton A binder) is presented here. This model implements aspects of previous kinetic models but calibrates the model parameters to data sets of three experiments: differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and one-dimensional time to explosion (ODTX). The calibration procedure contains three stages: one stage uses open-pan DSC and TGA to develop a base reaction for formation of heavy gases, a second stage features closed-pan DSC to ascertain the autocatalytic behavior of reactant gases attacking the solid explosive, and a final stage adjusts the rate for the breakdown of heavy reactant gases using ODTX experimental data. The resultant model presents a large improvement in the agreement between simulated DSC and TGA results and their respective experiments while maintaining the same level of agreement with ODTX, scaled thermal explosion, and laser heating explosion times when compared to previous models.     

Quantitative thermodynamic analysis of sublimation rates using an atomic force microscope

Atomic force microscopy (AFM) has been successfully used to study the activation energy for evaporation of pentaerythritol tetranitrate (PETN) nanoislands formed by spin coating. These islands are annealed isothermally in the temperature range of 30-70 degrees C for a given time and are scanned with AFM in contact mode at room temperature. The volume of these islands does not change significantly up to about 35-40 degrees C indicating that sublimation is not significant below 40 degrees C. Above 40 degrees C, the islands start shrinking, and the rate of weight loss is analyzed as a function of temperature. The activation energy of evaporation using AFM was found to be similar to that for bulk PETN crystals using thermogravimetric analysis (TGA) at higher temperatures (110-135 degrees C). These results demonstrate that AFM is a useful tool to measure thermodynamic properties with a nanoscale probe.     

ConFlo III - an interface for high precision delta(13)C and delta(15)N analysis with an extended dynamic range

A newly developed interface coupling a CHN combustion device (elemental analyser 'EA') to an isotope ratio mass spectrometer is described and evaluated. The purpose of the device is to extend the dynamic range of delta(13)C and delta(15)N analysis from less than 2 orders of magnitude to more than 3 orders of magnitude. Carbon isotope ratio measurements of atropine as a model compound have been performed analysing between 1 μg to 5 mg C with acceptable to excellent precision (0.6 to 0.06 per thousand, delta-notation). The correction due to the blank signal is critical for sample amounts smaller than 4 μg C. The maximum sample weight is determined by the combustion capacity of the EA. Larger sample amounts are measured using dilution of a small part of the EA effluent with helium. The dilution mechanism works virtually free of isotope fractionation. Copyright 1999 John Wiley & Sons, Ltd.     

Optimizing phase imaging via dynamic force curves

Tapping mode (TM, also called intermittent contact mode) atomic force microscopy (AFM) has been routinely used in many laboratories. However, consistent or deliberate control of measuring conditions and interpretation of results are often difficult. In this article, we demonstrate how measurement parameters (drive frequency, cantilever stiffness and oscillation amplitude) affect the tapping tip's state. This has been done by systematic dynamic force measurements performed on mica and polystyrene surfaces together with computer simulations. Our study shows the following results. (1) Weaker cantilevers, smaller amplitude and higher drive frequency (around the resonance) lead to an extension of the attractive region (greater phase lag) in amplitude–phase–distance curves and thus can help to achieve stable high-setpoint TM imaging with minimal tip–sample pressure. (2) Bistability of tapping tips often exists and may cause height artefacts if the setpoint falls in the bistable region. (3) Tapping tips with high vibrating energy (stiff cantilevers and large amplitude) driven at resonance are only slightly perturbed by tip–sample interactions and usually remain monostable during the sweep of the scanner position. This can help to achieve good phase contrast without significant artefacts when the setpoint falls in a continuous negative–positive phase shift transition region. (4) Low energy cantilevers (compliant cantilevers and small amplitude) usually result in large phase shift and can be used to acquire large phase contrast images. However, height artefacts will occur when the setpoint falls in the bistable region usually existing for such cantilevers. (5) Computer simulations are useful in understanding the bistability in dynamic force curves and determining either material properties or the optimal imaging parameters.     

The properties of ion-water clusters. II. Solvation structures of Na+, Cl-, and H+ clusters as a function of temperature

Ion-water-cluster properties are investigated both through the multistate empirical valence bond potential and a polarizable model. Equilibrium properties of the ion-water clusters H+(H2O)100, Na+(H2O)100, Na+(H2O)20, and Cl-(H2O)17 in the temperature region 100-450 K are explored using a hybrid parallel basin-hopping and tempering algorithm. The effect of the solid-liquid phase transition in both caloric curves and structural distribution functions is investigated. It is found that sodium and chloride ions largely reside on the surface of water clusters below the cluster melting temperature but are solvated into the interior of the cluster above the melting temperature, while the solvated proton was found to have significant propensity to reside on or near the surface in both the liquid- and solid-state clusters.     

Application of the Šesták-Berggren Equation to Organic and Inorganic Materials of Practical Interest

Reactions that have an initial acceleratory period are common in both organic and inorganic systems. The Šesták-Berggren equation, dx/dt= -kx ⁿ(1-x)^m[-ln(x)]^p, with p set to zero (also called the extended Prout-Tompkins (PT) equation) is an excellent empirical kinetic law for many of these systems. In this work, it is shown to fit both isothermal and constant heating rate pyrolysis data for a well-preserved algal kerogen in a petroleum source rock and two synthetic polymers (polycarbonate and poly-ether-etherketone), dehydration of calcium oxalate monohydrate, decomposition of ammonium percholorate, and diffusive release of gas implanted in materials. Activation energies derived by non-linear regression to multiple experiments are consistent with those derived by simple isoconversional methods. Errors caused by misapplication of first-order kinetics to single-heating-rate data are discussed briefly. This revised version was published online in August 2006 with corrections to the Cover Date.