A biocatalytic route to enantioenriched, sulfanyl aldol products

The aldol products derived from sulfur- or selenium containing acceptors were prepared by kinetic resolution in the presence of antibody 84G3 with enantiomeric excesses ranging from 56 to 70%. Much higher level of enantioselectivity was obtained (enantiomeric excesses all superior to 96%) for sulfanyl aldol products derived from thiomethoxyacetone with three different acceptors.     

Phase formation and control of morphology in sputtered Cu-In alloy layers

The dependence of structural properties and surface morphology of Cu-In alloy layers on the composition and sputtering deposition sequence were investigated by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The properties of the co-sputtered alloy layers changed abruptly around the composition boundary when the Cu/In ratio reached 1/2. This can be explained by the effective heat of formation (EHF) model, which has been used to predict the sequence of phase formation for metal diffusion couples. The use of a co-sputtered alloy layer with a high In concentration was not suitable for fabricating solar cells, because the film had a very rough morphology due to large In islands formed on the CuIn₂ phase. However, it was possible to minimize this phase by In sputtering followed by co-sputtering with a Cu/In ratio of 1 (Cu-In/In/Glass). This permitted the fabrication of a homogeneous Cu-In alloy layer, which was not possible through the simple co-sputtering.     

Discrete limit theorems for general Dirichlet series. III

Here we prove a limit theorem in the sense of the weak convergence of probability measures in the space of meromorphic functions for a general Dirichlet series. The explicit form of the limit measure in this theorem is given. Partially supported by Lithuanian Foundation of Studies and Science     

Randomization helps to perform independent tasks reliably

This paper is about algorithms that schedule tasks to be performed in a distributed failure‐prone environment, when processors communicate by message‐passing, and when tasks are independent and of unit length. The processors work under synchrony and may fail by crashing. Failure patterns are imposed by adversaries. Linearly‐bounded adversaries may fail up to a constant fraction of the processors. Weakly‐adaptive adversaries have to select, prior to the start of an execution, a subset of processors to be failure‐prone, and then may fail only the selected processors, at arbitrary steps, in the course of the execution. Strongly adaptive adversaries have a total number of failures as the only restriction on failure patterns. The measures of complexity are work, measured as the available processor steps, and communication, measured as the number of point‐to‐point messages. A randomized algorithm is developed, that attains both ??(n log*n) expected work and ??(n log*n) expected communication, against weakly‐adaptive linearly‐bounded adversaries, in the case when the numbers of tasks and processors are both equal to n. This is in contrast with performance of algorithms against strongly‐adaptive linearly‐bounded adversaries, which has to be Ω(n log n/log log n) in terms of work. © 2003 Wiley Periodicals, Inc. Random Struct. Alg., 2004     

Mathematical Modeling of Magnetohydrodynamic Processes in an Aluminum Electrolyzer

We model the electrolysis of aluminum in specific electrolysis baths. A model of the physical process is proposed, allowing for the specific bath design, including the state of the bottom surface. The mathematical model utilizes the information capabilities of the Navier–Stokes equations written for the metal and the electrolyte media. The multidimensional system of equations enables us to consider the magnetohydrodynamic processes in two media and the interaction of the media. The problem is solved numerically. The calculations simulate the interface dynamics and the distribution of velocities and currents in the middle layer in both media. The numerical results are compared with physical experiments.     

Uniform estimate of the constant in the strengthened CBS inequality for anisotropic non‐conforming FEM systems

Preconditioners based on various multilevel extensions of two‐level finite element methods (FEM) lead to iterative methods which have an optimal order computational complexity with respect to the size of the system. Such methods were first presented in Axelsson and Padiy (SIAM. J. Sci. Stat. Comp. 1990; 20 :1807) and Axelsson and Vassilevski (Numer. Math. 1989; 56 :157), and are based on (recursive) two‐level splittings of the finite element space. The key role in the derivation of optimal convergence rate estimates is played by the constant γ in the so‐called Cauchy–Bunyakowski–Schwarz (CBS) inequality, associated with the angle between the two subspaces of the splitting. It turns out that only existence of uniform estimates for this constant is not enough but accurate quantitative bounds for γ have to be found as well. More precisely, the value of the upper bound for γ∈(0,1) is part of the construction of various multilevel extensions of the related two‐level methods. In this paper, an algebraic two‐level preconditioning algorithm for second‐order elliptic boundary value problems is constructed, where the discretization is done using Crouzeix–Raviart non‐conforming linear finite elements on triangles. An important point to make is that in this case the finite element spaces corresponding to two successive levels of mesh refinements are not nested. To handle this, a proper two‐level basis is considered, which enables us to fit the general framework for the construction of two‐level preconditioners for conforming finite elements and to generalize the method to the multilevel case. The major contribution of this paper is the derived estimates of the related constant γ in the strengthened CBS inequality. These estimates are uniform with respect to both coefficient and mesh anisotropy. To our knowledge, the results presented in the paper are the first such estimates for non‐conforming FEM systems. Copyright © 2004 John Wiley & Sons, Ltd.     

Differential Operator Rings for Which Homogeneous Functions are Linear

Let ε be the collection of those rings S such that, for every S-module V and every homogeneous function ?. V → V, ?(sv) = s?(v), s ∈ S, v ∈ V, ? is linear on V. In this paper we characterize those Stanley-Reisner rings, R, such that D(R) is in ε.     

Solubility parameter determination of cationic surfactants by inverse GC

Summary The solubility parameters of cationic surfactants were obtained using the inverse gas chromatographic technique. The surfactants didodecyl dimethyl ammonium bromide, dioctadecyl dimethyl ammonium bromide and dodecyl pyridinium chloride were used as stationary phase and retention data of different probe solutes were measured at different temperatures. The results were analysed by the combination of Flory-Huggins and Hildebrand theories, and the solubility parameters of the surfactants were obtained in a range of temperatures between 80–120°C.     

Epoxy based coatings on glass: strengthening mechanisms

Glass may be strengthened by epoxy coatings although the strengthening mechanisms remain unclear. Possible strengthening mechanisms are reviewed and are used to analyse strength data for both a solvent based and a water based coating system. The coatings either fill (solvent based coatings), or partially fill (water based coatings) surface cracks and it is shown that closure stresses arising from the thermal expansion mismatch of the coating within these cracks can account for the observed degrees of strengthening. It is also demonstrated that other suggested mechanisms such as flaw healing cannot fully account for the observed degree of strengthening.