Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

Some covering properties in topological and uniform spaces

Recent progress in selection principles theory is discussed and is illustrated mainly by the Hurewicz covering property and its strong version, the Gerlits-Nagy property GN(*). Some results that have not been published elsewhere are given with proofs.     

Loss in a rectangular optical waveguide induced by the crossover of a second waveguide

We calculate the loss induced in a single-mode rectangular optical waveguide by the presence of a second waveguide, perpendicular to the first, which crosses over the first waveguide at a variable distance d. Our calculation is applied to the analysis of several doped silica waveguides of practical importance for optical circuit design.     

Writhing instabilities of twisted rods: from infinite to finite length

We use three different approaches to describe the static spatial configurations of a twisted rod as well as its stability during rigid loading experiments. The first approach considers the rod as infinite in length and predicts an instability causing a jump to self-contact at a certain point of the experiment. Semi-finite corrections, taken into account as a second approach, reveal some possible experiments in which the configuration of a very long rod will be stable through out. Finally, in a third approach, we consider a rod of real finite length and we show that another type of instability may occur, leading to possible hysteresis behavior. As we go from infinite to finite length, we compare the different information given by the three approaches on the possible equilibrium configurations of the rod and their stability. These finite size effects studied here in a 1D elasticity problem could help us guess what are the stability features of other more complicated (2D elastic shells for example) problems for which only the infinite length approach is understood.     

A note on the Σ1 spectrum of a theory

Let T be a suitable system of classical set theory. We will show, that the Σ₁ spectrum of T, i.e. the set of ordinals having good Σ₁ definition in T is an initial segment of the ordinals. Received: 11 October 1999 / Published online: 12 December 2001     

Discontinuous travelling wave solutions for certain hyperbolic systems

In an earlier paper on a malignant cell invasion model (Marchantet al., SIAM J. Appl. Math, 60, 2000) we introduced a novelform of discontinuous travelling wave solution. These solutionscould be studied easily by combining behaviour within a phaseplane with the Rankine–Hugoniot shock conditions, whichdescribe properties (such as the ratio of the jump discontinuitiesto the speed of propagation) that solutions may possess. Theseresults were new for several reasons. The shock conditions relateto hyperbolic equations (which the model is) but were appliedin a travelling wave ordinary differential equation phase planeusing techniques that usually apply to parabolic reaction–diffusionsystems. In addition the solutions possess singular behaviournear several points in the phase plane but in spite of thisthere exists a robust and stable family of physically interestingsolutions. In this paper we discuss two previously studied models, oneof detonation theory and one of angiogenesis. We show that eachof these models also possesses a family of discontinuous travellingwave solutions which was not previously discovered. Of particularinterest is the solution which has a blunt interface at thefront of the invading profile. In all three models it is thissolution that is seen to stably evolve from physically relevantinitial data, and for physically relevant parameter values. This work confirms the robustness of these novel travellingwave solutions and their applicability to a wider range of mathematicalmodelling situations.     

Threshold electrical switching in As45Te55-xInx and As50Te50-xInx glasses

The electrical switching behaviour of As₄₅Te_55-xIn_x (5≤x≤15) and As₅₀Te_50-xIn_x (2.5≤x≤11.5) has been studied over a wide range of compositions. These glasses are found to exhibit threshold switching. The composition dependence of switching voltage (V_t) has been found to exhibit a change in slope and a local minimum at compositions x=10 and 12.5 for As₄₅Te_55-xIn_x and x=7.5 and 10.8 for As₅₀Te_50-xIn_x, respectively. The slope change in V_t verses x and the local minimum have been identified using two network topological effects, namely the rigidity percolation threshold and the chemical threshold. Received: 23 August 2001 / Accepted: 27 August 2001 / Published online: 11 February 2002     

Magnetic properties of mechanically alloyed Co–Ti powder

An amorphous phase containing traces of non-transformed Co and Ti powders was obtained by mechanical alloying nominal compositions of Co₆₇Ti₃₃ and Co₅₀Ti₅₀ in a high-energy ball-mill. These alloys were prepared from elemental powders of Co and Ti. The heat treatment of Co₆₇Ti₃₃ at 573, 873 and 1173 K crystallized nanoparticles of Co₂Ti and Co₃Ti compounds, while the same treatments conducted on Co₅₀Ti₅₀ resulted in the formation of Co₂Ti and CoTi nanoparticles. The saturation magnetizations reached a maximum value in the amorphous state and they decreased when the temperatures of the heat treatment rose. Demagnetizing interparticle interaction effects were estimated through hysteresis loops and initial magnetization curves using the Fourier technique.