Automated high-capacity sorption probe for extraction of organic compounds in aqueous samples followed by gas chromatographic analysis

An automated high-capacity sorption device for GC analysis of ultra trace components has been developed. The scope of the presented technique was to combine the simplicity of solid-phase microextraction (SPME) with the high extraction efficiency of the stir bar sorptive extraction technology. Sorptive extractions of water samples were performed using polydimethylsiloxane (PDMS) rubber tubing (120 microl) mounted onto a glass rod. The sampling procedure was carried out by a robotic autoinjector. Since the setup is fully automated, unattended and precise time-controlled extraction of samples is possible and makes quantitation with non-equilibrium extractions feasible. The sorption probes are easy to exchange, which facilitates off-line/in-field sampling. The system was evaluated with a test mixture of 44 environmentally hazardous compounds. Detection limits were found to be in the sub-ppt region. The performance of the system was demonstrated with the analysis of polycyclic aromatic hydrocarbons in urban snow.     

Fluoride-bridged {Ln(2)Cr(2)} polynuclear complexes from semi-labile mer-[CrF(3)(py)(3)] and [Ln(hfac)(3)(H(2)O)(2)

The trifluorido complex mer-[CrF(3)(py)(3)] (py = pyridine) reacts with 1 equiv. of [Ln(hfac)(3)(H(2)O)(2)] and depending on the solvent forms the tetranuclear clusters [Cr(2)Ln(2)(μ-F)(4)(μ-OH)(2)(py)(4)(hfac)(6)], 1Ln, and [Cr(2)Ln(2)(μ-F)(4)F(2)(py)(6)(hfac)(6)], 2Ln, in acetonitrile and 1,2-dichloroethane, respectively (Ln = Y, Gd, Tb, Dy, Ho, and Er; hfacH = 1,1,1,5,5,5-hexafluoroacetylacetone). Reaction with [Dy(hfac)(3)(H(2)O)(2)] in dichloromethane produces the dinuclear cluster [CrDy(μ-F)F(OH(2))(py)(3)(hfac)(4)], 3Dy. All the clusters feature fluoride bridges between the chromium(iii) and lanthanide(iii) centres. Fits of susceptibility data for 1Gd and 2Gd reveal the fluoride-mediated chromium(iii)-lanthanide(iii) exchange interactions to be 0.43(5) cm(-1) and 0.57(7) cm(-1), respectively (in the convention). Heat capacity measurements on 2Gd reveal a moderate magneto-caloric effect (MCE) reaching -ΔS(m)(T) = 11.4 J kg(-1) K(-1) for ΔB(0) = 9 T → 0 T at T = 4.1 K. Out-of-phase alternating-current susceptibility (χ') signals are observed for 1Dy, 2Dy and 2Tb, demonstrating slow relaxation of the magnetization.     

Excited state dynamics in photosynthetic reaction center and light harvesting complex 1

Key to efficient harvesting of sunlight in photosynthesis is the first energy conversion process in which electronic excitation establishes a trans-membrane charge gradient. This conversion is accomplished by the photosynthetic reaction center (RC) that is, in case of the purple photosynthetic bacterium Rhodobacter sphaeroides studied here, surrounded by light harvesting complex 1 (LH1). The RC employs six pigment molecules to initiate the conversion: four bacteriochlorophylls and two bacteriopheophytins. The excited states of these pigments interact very strongly and are simultaneously influenced by the surrounding thermal protein environment. Likewise, LH1 employs 32 bacteriochlorophylls influenced in their excited state dynamics by strong interaction between the pigments and by interaction with the protein environment. Modeling the excited state dynamics in the RC as well as in LH1 requires theoretical methods, which account for both pigment-pigment interaction and pigment-environment interaction. In the present study we describe the excitation dynamics within a RC and excitation transfer between light harvesting complex 1 (LH1) and RC, employing the hierarchical equation of motion method. For this purpose a set of model parameters that reproduce RC as well as LH1 spectra and observed oscillatory excitation dynamics in the RC is suggested. We find that the environment has a significant effect on LH1-RC excitation transfer and that excitation transfers incoherently between LH1 and RC.     

SULFOPHTHALOCYANINES FOR PHOTODYNAMIC INACTIVATION OF VIRUSES IN BLOOD PRODUCTS: EFFECT OF STRUCTURAL MODIFICATIONS

Abstract— Transmission of infectious diseases through blood transfusions is well known. Ultraviolet irradiation, solvents and detergents provide a means of sterilizing noncellular blood components. However these harsh methods are not applicable to cellular blood products. Recently, attempts have been made to sterilize biological fluids using photodynamic treatment and phthalocyanine (Pc) dyes have been advanced as photosensitizers for this purpose. We have evaluated a series of water-soluble Pc, chelated with different central metal ions, substituted to different degrees with sulfonato and r-butyl groups, for their effectiveness to reduce virus infectivity in red blood cell suspensions. Vaccinia virus cytopathogenicity was determined by endpoint serial dilutions in the CV-1 cell line. Anti-viral activity increased with the central metal ion in the following order: Ga(III) < Al(III) < Zn(II), and varied inversely with the degree of sulfonation. Furthermore, addition of a t -butyl group onto the trisulfonated dyes (PcS₃[ t -Bul) resulted in a 5–40-fold increase in anti-viral potency, suggesting that amphiphilicity enhances the photodynamic activity of the dye. Strong anti-viral photosensitizing properties cannot be the sole selection criterion. Of equal importance is the preservation of blood component integrity. Accordingly, the photohemolytic activity of the dyes was evaluated using the rate of hemolysis as a parameter and a toxicity index was defined. Among the most active dyes, the AlPcS₃( t -Bu) complex exhibited the most favorable anti-viral properties combined with a low toxicity index. Our results suggest that trisulfophthalocyanines, bearing an additional t -butyl group to enhance amphiphilicity, are particularly promising dyes for photodynamic blood sterilization.     

Synthesis of Colloidal Suspensions of Zeolite ZSM-2

Discrete colloidal particles of zeolite ZSM-2 with crystal sizes less than 100 nm, in the form of aqueous suspensions, have been synthesized in tetramethylammonium (TMA)-aluminosilicate solutions in the presence of either lithium or a combination of lithium and sodium hydroxide. The well-crystallized ZSM-2 has a specific surface area of 781 m²/g after purification and removal of the organic base by calcination. Synthesis times (t) are as short as 3 < t < 12 h and in certain cases, less than 3 h, less than those previously reported in the literature. Prolonged hydrothermal treatment of sols in the presence of sodium cations (>12 h) results in the phase transformation of ZSM-2 to the nitrogeneous edingtonite zeolite (Li,Na)-E. The synthesis of nitrogeneous (Li,Na)-E is also favored by a high TMA content in conjunction with sodium, whereas synthesis of zeolite N-A is favored by a high sodium content. Furthermore, it is shown that colloidal suspensions of TMA sodalite with crystal sizes less than 40 nm are synthesized in the absence of alkali cations.     

Nanoscale patterning of organosilane molecular thin films from the gas phase and its applications: fabrication of multifunctional surfaces and large area molecular templates for site-selective material deposition

A simple methodology to fabricate micrometer- and nanometer-scale patterned surfaces with multiple chemical functionalities is presented. Patterns with lateral dimensions down to 110 nm were made. The fabrication process involves multistep gas-phase patterning of amine, thiol, alkyl, and fluorinated alkyl-functional organosilane molecules using PDMS molds as shadow masks. Also, a combination process of channel diffused plasma etching of organosilane molecular thin films in combination with masked gas-phase deposition to fabricate multilength scale, multifunctional surfaces is demonstrated.     

Cyto-mechanoresponsive polyelectrolyte multilayer films

Cell adhesion processes take place through mechanotransduction mechanisms where stretching of proteins results in biological responses. In this work, we present the first cyto-mechanoresponsive surface that mimics such behavior by becoming cell-adhesive through exhibition of arginine-glycine-aspartic acid (RGD) adhesion peptides under stretching. This mechanoresponsive surface is based on polyelectrolyte multilayer films built on a silicone sheet and where RGD-grafted polyelectrolytes are embedded under antifouling phosphorylcholine-grafted polyelectrolytes. The stretching of this film induces an increase in fibroblast cell viability and adhesion.     

Bridging Ligand Length Controls AT Selectivity and Enantioselectivity of Binuclear Ruthenium Threading Intercalators

The slow dissociation of DNA threading intercalators makes them interesting as model compounds in the search for new DNA targeting drugs, as there appears to be a correlation between slow dissociation and biological activity. Thus, it would be of great value to understand the mechanisms controlling threading intercalation, and for this purpose we have investigated how the length of the bridging ligand of binuclear ruthenium threading intercalators affects their DNA binding properties. We have synthesised a new binuclear ruthenium threading intercalator with slower dissociation kinetics from ct‐DNA than has ever been observed for any ruthenium complex with any type of DNA, a property that we attribute to the increased distance between the ruthenium centres of the new complex. By comparison with previously studied ruthenium complexes, we further conclude that elongation of the bridging ligand reduces the sensitivity of the threading interaction to DNA flexibility, resulting in a decreased AT selectivity for the new complex. We also find that the length of the bridging ligand affects the enantioselectivity with increasing preference for the ΔΔ enantiomer as the bridging ligand becomes longer.     

Monitoring abiotic degradation of branched polyethylenes formulated with pro-oxidants through different mechanical tests

The mechanical properties of two linear low density and low density polyethylenes containing a pro-oxidant additive were monitored during accelerated aging (60 °C in a convection oven) and weather exposure. Tearing tests (trouser) were performed for the first time in polyethylenes subjected to oxo-degradation revealing a transition from an extensible to a non-extensible material, at exposure times when standard tensile tests were not able to detect any changes in the materials. The essential work of fracture (EWF) technique was also applied and the results were in agreement with those of trouser tests. The specific essential work of fracture first increased with exposure time until the sample experienced a transition to a less ductile state where EWF was no longer applicable. EWF and trouser tear tests were more sensitive detecting the onset of degradation probably because they employ notched specimens that impose more critical stress concentration conditions than conventional tensile tests.