基于碳水化合物的阳离子聚合物载体在基因释放中的应用

在基因治疗中,基因释放载体是不可缺少的重要组成部分.近几年来聚合物基因释放载体的研究主要旨在开发低毒或无毒的阳离子聚合物用于安全有效的基因释放.作为一类天然化合物,基于碳水化合物的阳离子聚合物载体由于其良好的生物相容性和低毒性被广泛地研究并应用于基因释放.本文阐述了聚合物基因释放的机理,并对近几年来一些典型的含碳水化合物的阳离子聚合物基因释放载体作一综述.     

Ion- and atom-leaching mechanisms from palladium nanoparticles in cross-coupling reactions

Leaching of palladium species from Pd nanoparticles under C--C coupling conditions was observed for both Heck and Suzuki reactions by using a special membrane reactor. The membrane allows the passage of palladium atoms and ions, but not of species larger than 5 nm. Three possible mechanistic scenarios for palladium leaching were investigated with the aim of identifying the true catalytic species. Firstly, we examined whether or not palladium(0) atoms could leach from clusters under non-oxidising conditions. By using our membrane reactor, we proved that this indeed happens. We then investigated whether or not small palladium(0) clusters could in fact be the active catalytic species by analysing the reaction composition and the palladium species that diffused through the membrane. Neither TEM nor ICP analysis supported this scenario. Finally, we tested whether or not palladium(II) ions could be leached in the presence of PhI by oxidative addition and the formation of [Pd(II)ArI] complexes. Using mass spectrometry, UV-visible spectroscopy and 13C NMR spectroscopy, we observed and monitored the formation and diffusion of these complexes, which showed that the first and the third mechanistic scenarios were both possible, and were likely to occur simultaneously. Based on these findings, we maintain that palladium nanoparticles are not the true catalysts in C--C coupling reactions. Instead, catalysis is carried out by either palladium(0) atoms or palladium(II) ions that leach into solution.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Synthesis and Characterization of Dinuclear Ruthenium(II) Complexes Based on 4,4′‐Bipyridyl Type Bridging Ligands

The synthesis, spectroscopic, electrochemical and photophysical characterization of a series of dinuclear ruthenium(II) complexes of the type [(bpy)₂Ru(NnN)₂RuCl(bpy)₂](PF₆)₃, where NnN = 4,4′‐bipyridyl (N0N), 1,2‐bis(4‐pyridyl)ethylene (NEN), 1,2‐bis(4‐pyridyl)ethane (N2N), and 4,4′‐trimethylenedipyridine (N3N) are reported. The photophysical and electrochemical properties are discussed with particular emphasis on the ability of the bridging ligands to support intercomponent interaction.     

Analysis of 'ARN' naphthenic acids by high temperature gas chromatography and high performance liquid chromatography

Examination by high temperature GC (HTGC) of the methyl esters of the so-called 'ARN' naphthenic acids from crude oils of North Sea UK, Norwegian Sea and West African oilfields revealed the distributions of resolved 4-8 ring C80 tetra acids and trace amounts of other acids. Whilst all three oils contained apparently the same major acids, the proportions of each differed, possibly reflecting the growth temperatures of the archaebacteria from which the acids are assumed to have originated. The structures of the 4, 5, 7 and 8 ring acids are tentatively assigned by comparison with the known 6 ring acid and related natural products and an HPLC method for the isolation of the individual acids is described. ESI-MS of individual acids isolated by preparative HPLC established the elution order of the 4-8 ring acids on the HPLC and HTGC systems and revealed the presence of previously unreported acids tentatively identified as C81 and C82 7 and 8 ring analogues.     

End-evaporation dynamics revisited

We present analytical results on the so-called end-evaporation kinetics in equilibrium polymeric systems following a temperature jump (T jump). A T jump prepares the system with a nonequilibrium length distribution, after which it relaxes back to its equilibrium state. Starting from a master equation, we develop a mean-field analytical theory based on a generating function approach, which allows explicit approximate expressions for the monomer and dimer concentrations to be derived in a discrete setting; the concentrations of the other chains as well as the average chain length were shown to be entirely expressible in terms of the monomer and dimer concentrations. We find that the calculated monomer and dimer concentrations as well as the average chain length are in good agreement with numerical simulation results and do not suffer from some of the defects of earlier continuum theories. Furthermore, the relaxation was shown to take place in three different stages. The first stage comprises the very fast relaxation of the monomers to almost their equilibrium concentration; the other polymer chains have hardly relaxed. During the second stage, which is highly nonlinear, a redistribution of material at practically constant monomer density takes place. Only in the final stage of the relaxation process the chain concentrations approach their true equilibrium values. In this stage there are only very small shifts in the concentrations of chains, which are governed by extremely slow "indirect" monomer-mediated processes.     

Synthesis and Thermophysical Properties of Ether‐Functionalized Sulfonium Ionic Liquids as Potential Electrolytes for Electrochemical Applications

During this work, a novel series of hydrophobic room temperature ionic liquids (ILs) based on five ether functionalized sulfonium cations bearing the bis{(trifluoromethyl)sulfonyl}imide, [NTf₂]^? anion were synthesized and characterized. Their physicochemical properties, such as density, viscosity and ionic conductivity, electrochemical window, along with thermal properties including phase transition behavior and decomposition temperature, have been measured. All of these ILs showed large liquid range temperature, low viscosity, and good conductivity. Additionally, by combining DFT calculations along with electrochemical characterization it appears that these novel ILs show good electrochemical stability windows, suitable for the potential application as electrolyte materials in electrochemical energy storage devices.     

Acetic Anhydride as an Oxygen Donor in the Non-Hydrolytic Sol–Gel Synthesis of Mesoporous TiO2 with High Electrochemical Lithium Storage Performances

An original, halide-free non-hydrolytic sol–gel route to mesoporous anatase TiO₂ with hierarchical porosity and high specific surface area is reported. This route is based on the reaction at 200 °C of titanium(IV) isopropoxide with acetic anhydride, in the absence of a catalyst or solvent. NMR spectroscopic studies indicate that this method provides an efficient, truly non-hydrolytic and aprotic route to TiO₂. Formation of the oxide involves successive acetoxylation and condensation reactions, both with ester elimination. The resulting TiO₂ materials were nanocrystalline, even before calcination. Small (about 10 nm) anatase nanocrystals spontaneously aggregated to form mesoporous micron-sized particles with high specific surface area (240 m² g⁻¹ before calcination). Evaluation of the lithium storage performances shows a high reversible specific capacity, particularly for the non-calcined sample with the highest specific surface area favouring pseudo-capacitive storage: 253 mAh g⁻¹ at 0.1 C and 218 mAh g⁻¹ at 1 C (C=336 mA g⁻¹). This sample also shows good cyclability (92 % retention after 200 cycles at 336 mA g⁻¹) with a high coulombic efficiency (99.8 %). Synthesis in the presence of a solvent (toluene or squalane) offers the possibility to tune the morphology and texture of the TiO₂ nanomaterials.     

A general organocatalyst for direct alpha-functionalization of aldehydes: stereoselective C-C, C-N, C-F, C-Br, and C-S bond-forming reactions. Scope and mechanistic insights

The development of a general organocatalyst for the alpha-functionalization of aldehydes, via an enamine intermediate, is presented. Based on optically active alpha,alpha-diarylprolinol silyl ethers, the scope and applications of this catalyst for the stereogenic formation of C-C, C-N, C-F, C-Br, and C-S bonds are outlined. The reactions all proceed in good to high yields and with excellent enantioselectivities. Furthermore, we will present mechanistic insight into the reaction course applying nonlinear effect studies, kinetic resolution, and computational investigations leading to an understanding of the properties of the alpha,alpha-diarylprolinol silyl ether catalysts.     

Mechanism of hierarchical porosity development in MFI zeolites by desilication: the role of aluminium as a pore-directing agent

The role of the concentration and the nature of aluminium in the creation of hierarchical porosity in both commercial and synthesized MFI zeolites have been investigated through controlled mesoporosity development by desilication in alkaline medium. Framework aluminium controls the process of framework silicon extraction and makes desilication selective towards intracrystalline mesopore formation. An optimal molar Si/Al ratio in the range 25-50 has been identified; this leads to an optimal mesoporosity centred around 10 nm and mesopore surface areas of up to 235 m(2) g(-1) while preserving the intrinsic crystalline and acidic properties. At lower framework Si/Al ratios the relatively high Al content inhibits Si extraction and hardly any mesopores are created, while in highly siliceous ZSM-5 unselective extraction of framework Si induces formation of large pores. The existence of framework Al sites in different T positions that are more or less susceptible to the alkaline treatment, and the occurrence of re-alumination, are tentative explanations for the remarkable behaviour of Al in the desilication process. The presence of substantial extra framework Al, obtained by steam treatment, inhibits Si extraction and related mesopore formation; this is attributed to re-alumination of the extraframework Al species during the alkaline treatment. Removal of extraframework Al species by mild oxalic acid treatment restores susceptibility to desilication, which is accompanied by formation of larger mesopores due to the enhanced Si/Al ratio in the acid-treated zeolite.