Biomimetic compound eye with a high numerical aperture and anti-reflective nanostructures on curved surfaces

Biomimetic compound eyes with a high numerical aperture on a curved surface were successfully fabricated by intelligent integration of traditional top-down and bottom-up micro- and nanofabrication methods together. In addition, the new hybrid micro- and nanofabrication method allows us to fabricate the antireflective nanostructures on each ommatidium to increase its vision sensitivity by improving the light transmission. The fabricated compound eye was optically characterized and was shown to have a numerical aperture of 0.77 for each ommatidium. Furthermore, it is shown that the transmission of the compound eye can be improved by 2.3% for the wavelength of 632.8 nm and a clearer image can be formed by the fabricated compound eye with antireflective nanostructures compared with that without antireflective nanostructures. In addition, the developed hybrid manufacturing method can be adapted to the fabrication of other complex micro- and nanodevices for photonics or other research areas.     

Uncertainty-based experimental validation of nonlinear reduced order models

This paper presents the first results of a combined experimental–computational investigation focused on the validation of reduced order models of geometrically nonlinear structures in the presence of uncertainty. The validation approach considered here is based on the premise that the model is valid if the experimental results can be considered as random sample responses of the stochastic system of which the reduced order model is the mean. For the situation considered here, the power spectra of the experiments should lie within the 2nd and 98th percentiles of the response (forming the uncertainty band) of the stochastic model. Nominally clamped–clamped beams are considered to demonstrate the entire process. The construction of two mean reduced order models and their stochastic counterparts are first performed. Then, the validation effort is carried out by comparing experimentally obtained power spectra and their corresponding computational uncertainty bands. This process leads, for both reduced order models, to a very good representation of the important upper envelope (98th percentile) of the experimental data but a less good fit of the lower envelope (2nd percentile).     

Size controlled synthesis of semiconductor nanocrystals in a continuous-flow mode microcapillary reactor

A microcapillary reactor with 320 μm inner diameter was utilized for CdSe nanoparticle synthesis. The influence of the reaction temperature and flow rate of precursors on the size and size distribution of prepared CdSe nanoparticles was systematically studied. The as-prepared nanoparticles exhibit sharp excitonic absorption and photoluminescence peak (FWHM 30 nm) with a quantum-yield around 10–40%. The microcapillary reactor was also used for CdSe/ZnS core-shell nanoparticle synthesis in continuous-flow mode. The quantum yield of the core-shell nanoparticles was found to be considerably influenced by the reactor temperature and have a close correlation with the thickness of ZnS shell under growth. An optimized quantum yield up to 70% was obtained for the CdSe/ZnS core-shell nanoparticles.     

Stable multiwavelength fiber ring laser with equalized power spectrum based on a semiconductor optical amplifier

We experimentally demonstrated a new structure of a multiwavelength semiconductor optical amplifier (SOA) ring laser based on a fiber Sagnac loop filter that can generate up to 25 stable output lasing wavelengths at room temperature. By varying the length of a polarization-maintaining (PM) fiber within the Sagnac loop filter, the wavelength spacing between the output lasing wavelengths can be changed to a desired value. By tuning a polarization controller (PC) within the Sagnac loop filter, stable multiwavelength 1550-nm operation with up to 17 lasing lines within 3 dB power level variation and with a wavelength spacing of ∼0.8 nm was achieved. The optical signal-to-noise ratios (OSNRs) of all the lasing wavelengths are greater than 40 dB.     

Processing for optically active erbium in silicon by film co-deposition and ion-beam mixing

Techniques of film deposition by co-evaporation, ion-beam assisted mixing, oxygen ion implantation, and thermal annealing were been combined in a novel way to study processing of erbium-in-silicon thin-film materials for optoelectronics applications. Structures with erbium concentrations above atomic solubility in silicon and below that of silicide compounds were prepared by vacuum co-evaporation from two elemental sources to deposit 200-270 nm films on crystalline silicon substrates. Ar⁺ ions were implanted at 300 keV. Oxygen was incorporated by O⁺-ion implantation at 130 keV. Samples were annealed at 600 °C in vacuum. Concentration profiles of the constituent elements were obtained by Rutherford backscattering spectrometry. Results show that diffusion induced by ion-beam mixing and activated by thermal annealing depends on the deposited Si-Er profile and reaction with implanted oxygen. Room temperature photoluminescence spectra show Er³⁺ transitions in a 1480-1550 nm band and integrated intensities that increase with the oxygen-to-erbium ratio.     

A Monte Carlo study of the thermodynamic properties of a quasi-one-dimensional organic polymer ferromagnet

The thermodynamic properties of a quasi-one-dimensional organic ferromagnet at different temperatures and in different applied magnetic fields have been investigated by means of the Heisenberg model combined with the Monte Carlo method. The results indicate that a peak in the magnetic susceptibility is obtained at low temperatures. Furthermore, the effect of dimerization on the magnetic properties has also been studied. We find that the dimerization suppresses the magnetization in this model. The ferromagnetic couplings between the side-free radicals stabilize the ferromagnetism and increase the apparent Curie temperature.     

Theoretical and experimental investigations of nanosecond 177.3 nm deep-ultraviolet light by second harmonic generation in KBBF

We have presented theoretical and experimental investigations of nanosecond (ns) deep-ultraviolet (DUV) 177.3 nm radiation by means of second harmonic generation (SHG) from a frequency-tripled Nd:YAG laser (355 nm, 49 ns and 10 kHz) in KBe₂BO₃F₂ (KBBF) nonlinear crystal for the first time. A DUV KBBF-SHG numerical model, accounting for linear absorption, pump depletion, beam spatial birefringent walk-off and diffraction, is performed in the Gaussian approximation of spatial and temporal profiles. In the experiment, a maximum average output power of 14.1 mW at 177.3 nm was obtained. The dependence of 177.3 nm output power on the 355 nm pump power was simulated. The calculated results are in good agreement with the measured data. We used the model further to investigate the optical conversion efficiency, pulse width, beam spatial intensity profile and beam quality factor of the generated 177.3 nm light, in particular the effect of beam birefringent walk-off.     

Effect of secondary phases evolution in the first sintering process on the critical current density of Bi-2223/Ag tapes

Effect of the evolution of the secondary phases in the first sintering process on the microstructure and critical current density of Bi-2223/Ag tapes has been studied. The amount and grain size of secondary phases were characterized by XRD and SEM/EDS. It has been found that both the microstructure and critical current of the fully reacted tapes depended strongly on the secondary phases formed in the first sintering process. The (Ca,Sr)₂CuO₃ and (Ca,Sr)₁₄Cu₂₄O₄₁ phases were easily formed and to be stable at higher temperature, however, at lower temperature, the CuO particles appeared easily and keeping stable with dwelling time. The best conversion to Bi-2223, together with the lowest amount of the total secondary phases was achieved when samples treated at 830 °C in 8.5% O₂. Samples with the lowest amount and minimum size of secondary phase produced in the first sintering process will obtain the best performance of the fully reacted tapes. The optimum sintering parameters are obtained by controlling the evolution of the secondary phases during the first sintering process.     

Attenuation of interfacial pinning enhancement in YBCO using a PrBCO buffer layer

Numerous experimental results have suggested that the J_c of YBa₂Cu₃O₇ (YBCO) films is significantly higher near the film–substrate interface than in the remainder of the film. We previously proposed that this effect is due to interfacial pinning enhancement caused by stress and the resulting misfit dislocations at the heteroepitaxial interface. To test this hypothesis we have used a non-superconducting PrBa₂Cu₃O_7?δ (PrBCO) buffer layer to minimize the lattice mismatch with YBCO. We find that the PrBCO layers lower J_c of the 0.4 μm YBCO films in a predictable way, and that, if sufficiently thick (～0.5 μm), they eliminate interfacial enhancement altogether. Our interpretation of this result is that the defects responsible for interfacial enhancement of flux pinning originate at the bottom of the non-superconducting PrBCO layer, which screens the pinning centers from vortices in YBCO. This result demonstrates that the pinning enhancement arises from stress at the film–substrate interface.     

Synchronization in evolving snowdrift game model

The interaction between the evolution of the game and the underlying network structure with evolving snowdrift game model is investigated. The constructed network follows a power-law degree distribution typically showing scale-free feature. The topological features of average path length, clustering coefficient, degree-degree correlations and the dynamical feature of synchronizability are studied. The synchronizability of the constructed networks changes by the interaction. It will converge to a certain value when sufficient new nodes are added. It is found that initial payoffs of nodes greatly affect the synchronizability. When initial payoffs for players are equal, low common initial payoffs may lead to more heterogeneity of the network and good synchronizability. When initial payoffs follow certain distributions, better synchronizability is obtained compared to equal initial payoff. The result is also true for phase synchronization of nonidentical oscillators.